BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU

Item number: 101215387
BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BDF 200-(1)-AS-(2)-(3)-(4)-(5)-(6)


(1)
ST1Connector plug M12 - plastic - bottom
ST2Connector plug M12, above

(2)
NHEmergency stop pushbutton without protective collar
NHKEmergency stop with protective collar

(3)
WS 2/3Selector switch, 2/3 switch position
WT 2/3Selector switch, 2/3 switch positions
SW 20Key switch/button, 2 switch positions
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(4)
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(5)
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(6)
withoutwithout indicator lamp G24
G24with indicator lamp G24
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Pos 1: E-STOP with protective collar
  • Pos 2: RED signal light
  • Pos 3: WHITE illuminated pushbutton
  • Pos 4: BLUE illuminated pushbutton
  • Integrated AS-Interface
  • with connector plug M12 bottom
  • slender shock-proof thermoplastic enclosure
  • to be installed at an ergonomic favourable position
  • to be fitted to commercial-off-the-shelf aluminium profiles

Ordering data

Product type description

BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU
Article number (order number)

101215387
EAN (European Article Number)

4030661448459
eCl@ss number, version 12.0

27-33-02-04
eCl@ss number, version 11.0

27-33-02-04
eCl@ss number, version 9.0

27-33-02-04
ETIM number, version 7.0

EC001415
ETIM number, version 6.0

EC001415

Approvals - Standards

Certificates

TÜV

cULus

ASi-SaW

General data

Standards

EN IEC 62026-2

EN ISO 13849-1

EN ISO 13850

EN IEC 60947-5-1

EN IEC 61508
Climatic stress

DIN EN 60068
Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight

280 g
Reaction time, maximum

100 ms
Positions used, position 1

Emergency stop, with protective collar
Positions used, position 2

Illuminated signal, red
Positions used, position 3

Illuminated pushbutton, white
Positions used, position 4

Illuminated pushbutton, blue

General data - Features

Indicator lamp

No

Safety classification

Standards

EN IEC 61508
Performance Level, up to

e
Category

4
PFH value

1.40 x 10⁻⁸ /h
Note (PFH-value)

up to max. 5,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in

3
Mission time

20 Year(s)

Mechanical data

Mechanical life, Emergency-Stop button

100,000 Operations
Mechanical life, Command devices

1,000,000 Operations

Mechanical data - Connection technique

Termination

Connector plug M12, 4-pole, (A-coding)

Mechanical data - Dimensions

Width

40 mm
Height

69 mm
Depth

233.5 mm

Ambient conditions

Degree of protection

IP65
Ambient temperature

-25 ... +65 °C
Storage and transport temperature, minimum

-25 °C
Storage and transport temperature, maximum

+85 °C
Resistance to vibrations

10 … 150 Hz, amplitude 0.35 mm / 5 g
Restistance to shock

15 g / 11 ms
Protection class

II

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VDC
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

III
Degree of pollution

3

Electrical data - AS Interface

Rated operating voltage

18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum

150 mA

Electrical data - AS-Interface specification

Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF)

FID: periphery error
AS-i Version (Safety-Slave)

V 3.0
AS-i Profile (Safety-Slave)

S-7.B.F.F
AS-i Input, Channel 1 (Safety-Slave)

Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2 (Safety-Slave)

Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Output, DO 0 (Safety-Slave)

Indicator lamp G24 red
AS-i Output, DO 1 (Safety-Slave)

Indicator lamp G24 green
AS-i Output, DO 2 (Safety-Slave)

No Function
AS-i Output, DO 3 (Safety-Slave)

No Function
AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3

No function
AS-i Version (A/B Slave)

V 3.0
AS-i Profile (A/B Slave)

S-7.A.7.F
AS-i Input, DI 0 (A/B Slave)

Command device Position 4
AS-i Input, DI 1 (A/B Slave)

Command device Position 3
AS-i Input, DI 2 (A/B Slave)

Command device Position 2
AS-i Input, DI 3 (A/B Slave)

Command device Position 2
AS-i Output, DO 0 (A/B Slave)

Illuminated signal position 4
AS-i Output, DO 2 (A/B Slave)

Illuminated signal position 2
AS-i Output, DO 1 (A/B Slave)

Illuminated signal position 3
AS-i Output, DO 3 (A/B Slave)

No Function
AS-i AS-i Parameter bits (A/B Slave), P0 ... P3

No function
AS-i Input module address

0
Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note

Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.

Pin assignment

PIN 1

AS-Interface +
PIN 2

n.c.
PIN 3

AS-Interface -
PIN 4

n.c.
EU Declaration of Conformity LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.
Name of the component:BDF200AS
Type:See ordering code
Description of the component:Control panel with or without emergency-stop function and integrated AS interface
Relevant Directives:Machinery Directive 1)2006/42/EC
 Low Voltage Directive2014/35/EU
 EMC-Directive2014/30/EU
 RoHS-Directive2011/65/EU
 1) For device versions with emergency-stop function
Applied standards:DIN EN 60947-5-1:2010
DIN EN 60947-5-5:20151)
DIN EN ISO 13850:2016
DIN EN ISO 13849-1:2016
IEC 61508 parts 1-7:2010
Person authorised for the compilation of the technical documentation:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Place and date of issue:Wuppertal, March 31, 2020
 GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director
UK Declaration of Conformity LOG_COM_lo1de01s
Company:K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.
Name of the component:BDF200AS
Type:See ordering code
Description of the component:Control panel with or without emergency-stop function and integrated AS interface
Relevant legislation:Supply of Machinery (Safety) Regulations 1)2008
 Electrical Equipment (Safety) Regulations2016
 Electromagnetic Compatibility Regulations2016
 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations2012
 
 1) For device versions with emergency-stop function
Designated standards:EN 60947-5-1:2017 + AC:2020
EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1)
EN ISO 13850:2015
EN ISO 13849-1:2015
IEC 61508 parts 1-7:2010
UK-Importer /
Person authorised for the compilation of the technical documentation:


Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL
Place and date of issue:Wuppertal, November 18, 2022
 GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director

Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 2023-06-07, 12:34 p.m.