BNS 180-12Z

Item number: 101120913

BNS 180-12Z

Item number: 101120913

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

QTY

Product type description:

BNS 180-(1)Z-(2)

(1)
11	1 NO contacts/1 NC contact
12	1 NO contact/2 NC contacts
02	2 NC contact

(2)
2187-2	Individual contact outlet

Not all component variants, which are possible according to this order code are available and/or technically feasible.

Thermoplastic enclosure
Suitable for food processing industry only in combination with BP 15 SS
Particularly large switching distance
Ø M 18 x 1
Long life
no mechanical wear
Insensitive to transverse misalignment
Insensitive to soiling
uncoded, concealed installation according to ISO 14119

Ordering data

Product type description	BNS 180-12Z
Article number (order number)	101120913
EAN (European Article Number)	4030661049342
eCl@ss number, version 12.0	27-27-44-01
eCl@ss number, version 11.0	27-27-24-02
eCl@ss number, version 9.0	27-27-24-02
ETIM number, version 7.0	EC002544
ETIM number, version 6.0	EC002544

Approvals - Standards

Certificates	TÜV BG cULus

General data

Standards	BG-GS-ET-14 EN IEC 60947-5-3
Coding level according to EN ISO 14119	None
Working principle	Magnetic drive
Installation conditions (mechanical)	quasi-flush
Housing material	Glass-fibre, reinforced thermoplastic
Gross weight	64 g

General data - Features

Number of normally closed (NC)	2
Number of normally open (NO)	1
Number of safety contacts	2
Number of cable wires	4

Safety classification

Standards	EN ISO 13849-1
Mission time	20 Year(s)

Safety classification - Safety outputs

B_10D- Value Normally-closed contact/Normally open contact (NC/NO)	25,000,000 Operations

Mechanical data

Actuating element	Magnet
Switching distance actuator	Actuating magnet BP 6, Sao: 10 mm Actuating magnet BP 6, Sar: 22 mm Actuating magnet BP 8, Sao: 10 mm Actuating magnet BP 8, Sar: 22 mm Actuating magnet BP 10, Sao: 20 mm Actuating magnet BP 10, Sar: 32 mm Actuating magnet BP 15 SS, Sao: 20 mm Actuating magnet BP 15 SS, Sar: 32 mm
Direction of motion	Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" S_ao	10 mm 20 mm
Assured switching distance "OFF" S_ar	22 mm 32 mm

Mechanical data - Connection technique

Length of cable	1 m
Termination	Cable
Wire cross-section	0.25 mm²
Wire cross-section	23 AWG
Material of the Cable mantle	PVC

Mechanical data - Dimensions

ISO thread of the sensor	M18
Length of sensor	36 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +70 °C
Storage and transport temperature	-25 ... +70 °C
Resistance to vibrations	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms

Electrical data

Switching voltage, maximum	100 VAC
Switching voltage, maximum	100 VDC
Switching current, maximum	0.25 A
Switching capacity, maximum	3 W
Switching frequency, maximum	5 Hz

Scope of delivery

Scope of delivery	Actuator must be ordered separately.

Accessory

Recommendation (actuator)	BP 10 BP 8 BP 6 BP 15 SS
Recommended safety switchgear	SRB-E-301ST SRB-E-201LC

Note

Note (General)	Contact symbols shown for the closed condition of the guard device. The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN ISO 14119)

Product picture (catalogue individual photo)

ID: kbns1f02

| 228.7 kB | .jpg | 130.881 x 409.575 mm - 371 x 1161 px - 72 dpi

| 88.8 kB | .png | 74.083 x 231.775 mm - 210 x 657 px - 72 dpi

| 18.0 kB | .jpg | 39.511 x 123.472 mm - 112 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1bns1g02

| 31.2 kB | .cdr |

| 5.6 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 67.5 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: k2o1sk05

| 43.5 kB | .jpg | 352.778 x 61.736 mm - 1000 x 175 px - 72 dpi

| 2.7 kB | .png | 74.083 x 13.053 mm - 210 x 37 px - 72 dpi

Characteristic curve

ID: kbns1a01

| 17.5 kB | .png | 74.083 x 46.567 mm - 210 x 132 px - 72 dpi

| 135.8 kB | .jpg | 352.778 x 221.192 mm - 1000 x 627 px - 72 dpi

Actuator

Mouting accessories

EU Conformity Declaration

Pdf

EU-Konformitätserklärung

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Erklärung:

Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen.

Bezeichnung des Bauteils:

BNS 180

Typ:

siehe Typenschlüssel

Beschreibung des Bauteils:

Magnetisch wirkender Sicherheits-Sensor in Verbindung mit den Schmersal Auswerteinheiten AES / AZR / SRB oder einer vergleichbaren sicherheitsgerichteten Steuerung, die den Anforderungen der DIN EN 60947-5-3 genügt.

Einschlägige Richtlinien:	Maschinenrichtlinie	2006/42/EG
	RoHS-Richtlinie	2011/65/EU

Angewandte Normen:

DIN EN 60947-5-3:2010
DIN EN ISO 14119:2014

Bevollmächtigter für die Zusammenstellung der technischen Unterlagen:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Ort und Datum der Ausstellung:

Wuppertal, 23. Februar 2016

Rechtsverbindliche Unterschrift
Philip Schmersal
Geschäftsführer

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 18/04/2024, 8:22 pm

Cart

Login Register now

BNS 180-12Z