BNS 260-02/01ZG-R

Item number: 101184374
BNS 260-02/01ZG-R

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BNS 260-(1)(2)Z(3)-(4)-(5)


(1)
111 NO contacts/1 NC contact
022 NC contact

(2)
withoutwith diagnostic output
/011 NC contact

(3)
withoutwithout LED switching conditions display
Gwith LED switching conditions display

(4)
withoutPre-wired cable
STwith connector

(5)
LDoor hinge on left-hand side
RDoor hinge on right-hand side
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Pre-wired cable
  • Thermoplastic enclosure
  • small body
  • Concealed mounting possible
  • 26 mm x 36 mm x 13 mm
  • Long life
  • no mechanical wear
  • Insensitive to transverse misalignment
  • Insensitive to soiling

Ordering data

Product type description

BNS 260-02/01ZG-R
Article number (order number)

101184374
EAN (European Article Number)

4030661321721
eCl@ss number, version 12.0

27-27-44-01
eCl@ss number, version 11.0

27-27-24-02
eCl@ss number, version 9.0

27-27-24-02
ETIM number, version 7.0

EC002544
ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

TÜV

BG

cULus

General data

Standards

BG-GS-ET-14

EN IEC 60947-5-3
Coding level according to EN ISO 14119

Low
Working principle

Magnetic drive
Installation conditions (mechanical)

quasi-flush
Housing material

Glass-fibre, reinforced thermoplastic
Gross weight

55 g

General data - Features

Integral system diagnostics, status

Yes
Number of normally closed (NC)

3
Number of safety contacts

2
Number of cable wires

6

Safety classification

Standards

EN ISO 13849-1
Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

25,000,000 Operations

Mechanical data

Actuating element

Magnet
Door hinge

Right
Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn)

Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" Sao

5 mm
Assured switching distance "OFF" Sar

15 mm

Mechanical data - Connection technique

Length of cable

1 m
Termination

Cable
Wire cross-section

0.25 mm2
Material of the Cable mantle

PVC

Mechanical data - Dimensions

Length of sensor

13 mm
Width of sensor

26 mm
Height of sensor

36 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +70 °C
Storage and transport temperature

-25 ... +70 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms

Ambient conditions - Insulation values

Rated insulation voltage Ui

75 VDC
Rated impulse withstand voltage Uimp

0.8 kV

Electrical data

Required rated short-circuit current

100 A
Switching voltage, maximum

24 VDC
Switching current, maximum

0.01 A
Switching capacity, maximum

0.24 W
Switching frequency, maximum

5 Hz

Status indication

Note (Integral System Diagnostics, status )

The LED is illuminated when the guard is closed.

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 260
Recommended safety switchgear

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Contact symbols shown for the closed condition of the guard device.

The contact configuration for versions with or without LED is identical.

Wiring example

Note (Wiring diagram)

The contacts S11-S12 and S21-S22 must be integrated in the safety circuit.

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 23/04/2024, 6:43 pm