BDF200-ST1-AS-B-SWS20S1-LTYE-DTWH-G24

Item number: 103039892
BDF200-ST1-AS-B-SWS20S1-LTYE-DTWH-G24

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BDF 200-(1)-AS-(2)-(3)-(4)-(5)-(6)


(1)
ST1Connector plug M12 - plastic - bottom
ST2Connector plug M12, above

(2)
NHEmergency stop pushbutton without protective collar
NHKEmergency stop with protective collar

(3)
WS 2/3Selector switch, 2/3 switch position
WT 2/3Selector switch, 2/3 switch positions
SW 20Key switch/button, 2 switch positions
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(4)
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(5)
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)

(6)
withoutwithout indicator lamp G24
G24with indicator lamp G24
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Integrated AS-Interface
  • with connector plug M12 bottom
  • Pos 1: Blanking plug
  • Pos 2: Key selector switch, 2 positions, key removable position 0
  • Pos 3: YELLOW illuminated pushbutton
  • Pos 4: WHITE pushbutton
  • Indicator lamp G24 on top
  • slender shock-proof thermoplastic enclosure
  • to be installed at an ergonomic favourable position
  • to be fitted to commercial-off-the-shelf aluminium profiles

Ordering data

Product type description

BDF200-ST1-AS-B-SWS20S1-LTYE-DTWH-G24
Article number (order number)

103039892
EAN (European Article Number)

4030661552125
eCl@ss number, version 12.0

27-37-12-16
eCl@ss number, version 11.0

27-37-12-16
eCl@ss number, version 9.0

27-37-12-16
ETIM number, version 7.0

EC000225
ETIM number, version 6.0

EC000225
Note (Ordering data)

Notice: see ordering code

Approvals - Standards

Certificates

TÜV

ASi-SaW

General data

Standards

EN IEC 62026-2

EN ISO 13849-1

EN ISO 13850

EN IEC 60947-5-1

EN IEC 61508
Climatic stress

DIN EN 60068
Housing material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Reaction time, maximum

100 ms
Positions used, position 1

blanking plug
Positions used, position 2

Key selector switch 3 positions
Positions used, position 3

Illuminated pushbutton, yellow
Positions used, position 4

Pushbutton, white
Gross weight

280 g

General data - Features

Indicator lamp

Yes

Safety classification

Standards

EN IEC 61508
Performance Level, up to

e
Category

4
PFH value

1.40 x 10⁻⁸ /h
Note (PFH-value)

up to max. 5,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in

3
Mission time

20 Year(s)

Mechanical data

Mechanical life, Emergency-Stop button

100,000 Operations
Mechanical life, Command devices

1,000,000 Operations
Mounting

interior mounting holes
Type of the fixing screws

2x M5

Mechanical data - Connection technique

Termination

Connector plug M12, 4-pole, (A-coding)

Mechanical data - Dimensions

Width

40 mm
Height

69 mm
Depth

252.5 mm

Ambient conditions

Degree of protection

IP65
Ambient temperature

-25 ... +65 °C
Storage and transport temperature

-25 ... +85 °C
Resistance to vibrations

10 … 150 Hz, amplitude 0.35 mm / 5 g
Restistance to shock

15 g / 11 ms
Protection class

II
Permissible installation altitude above sea level, maximum

2,000 m

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VDC
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

III
Degree of pollution

3

Electrical data - AS Interface

Rated operating voltage

18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum

150 mA

Electrical data - AS-Interface specification

Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF)

FID: periphery error
AS-i Version (Safety-Slave)

V 3.0
AS-i Profile (Safety-Slave)

S-7.B.F.F
AS-i Input, Channel 1 (Safety-Slave)

Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2 (Safety-Slave)

Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Output, DO 0 (Safety-Slave)

Indicator lamp G24 red
AS-i Output, DO 1 (Safety-Slave)

Indicator lamp G24 green
AS-i Output, DO 2 (Safety-Slave)

No Function
AS-i Output, DO 3 (Safety-Slave)

No Function
AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3

No function
AS-i Version (A/B Slave)

V 3.0
AS-i Profile (A/B Slave)

S-7.A.7.F
AS-i Input, DI 0 (A/B Slave)

Command device Position 4
AS-i Input, DI 1 (A/B Slave)

Command device Position 3
AS-i Input, DI 2 (A/B Slave)

Command device Position 2
AS-i Input, DI 3 (A/B Slave)

Command device Position 2
AS-i Output, DO 0 (A/B Slave)

Illuminated signal position 4
AS-i Output, DO 2 (A/B Slave)

Illuminated signal position 2
AS-i Output, DO 1 (A/B Slave)

Illuminated signal position 3
AS-i Output, DO 3 (A/B Slave)

No Function
AS-i AS-i Parameter bits (A/B Slave), P0 ... P3

No function
AS-i Input module address

0
Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note

Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.

Pin assignment

PIN 1

AS-Interface +
PIN 2

n.c.
PIN 3

AS-Interface -
PIN 4

n.c.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 23/04/2024, 06:13