BNS 303-11Z 12,0M

Item number: 101149491

Downloads

ePLAN Data
CADENAS CAD Data
Product type description:

BNS 303-(1)Z(2)-(3)-(4)


(1)
111 NO contacts/1 NC contact
121 NO contact/2 NC contacts
02- / 2 NC contacts
03- / 3 NC contacts

(2)
withoutwithout LED switching conditions display
Gwith LED switching conditions display

(3)
withoutwith cable
STwith connector M12

(4)
2187Individual contact outlet
2211higher switching distance
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Thermoplastic enclosure
  • Long life
  • Suitable for food processing industry only in combination with BPS 303 SS
  • no mechanical wear
  • Ø M30
  • Insensitive to transverse misalignment
  • Insensitive to soiling

Ordering data

Product type description

BNS 303-11Z 12,0M

Article number (order number)

101149491

EAN (European Article Number)

4030661151915

eCl@ss number, version 11.0

27-27-24-02

eCl@ss number, version 9.0

27-27-24-02

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

TÜV

BG

cULus

EAC

General data

Standards

BG-GS-ET-14

EN IEC 60947-5-3

Coding level according to EN ISO 14119

Low

Working principle

Magnetic drive

Installation conditions (mechanical)

quasi-flush

Enclosure material

Glass-fibre, reinforced thermoplastic

Material of the nuts

Thermoplastic

Gross weight

461 g

General data - Features

Number of normally closed (NC)

1

Number of normally open (NO)

1

Number of safety contacts

2

Number of cable wires

4

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D- Value Normally-closed contact/Normally open contact (NC/NO)

25,000,000 Operations

Mechanical data

Actuating element

Magnet

Direction of motion

Head-on to the active surface

Tightening torque of nuts, maximum

3 Nm

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" Sao

5 mm

Assured switching distance "OFF" Sar

15 mm

Mechanical data - Connection technique

Termination

Cable

Length of cable

12 m

Wire cross-section

0.25 mm2

Wire cross-section

23 AWG

Material of the Cable mantle

PVC

Mechanical data - Dimensions

ISO thread of the sensor

M30

width across flats

36 BK

Length of sensor

44 mm

Ambient conditions

Degree of protection

IP67

Ambient temperature, minimum

-25 °C

Ambient temperature, maximum

+70 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+70 °C

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Electrical data

Voltage type

AC (alternating current)

DC (direct current)

Switching voltage, maximum

100 VAC

Switching voltage, maximum

100 VDC

Switching current, maximum

0.4 A

Switching capacity, maximum

10 W

Switching frequency, maximum

5 Hz

Electrical data - Digital Output

Design of control elements

Miscellaneous, Reed contacts

Scope of delivery

Scope of delivery

Actuators must be ordered separately.

Scope of delivery of mounting material

2x Mounting material M30 x 1.5 nuts

Accessory

Recommendation (actuator)

BPS 300

BPS 303

BPS 303 SS

Recommended safety switchgear

SRB 301AN

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Contact symbols shown for the closed condition of the guard device.

The contact configuration for versions with or without LED is identical.


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 06/12/2022, 00:11