EX-BNS 33-02ZG-2187-3G/D 5,0M

Item number: 101192970

Downloads

ePLAN Data
CADENAS CAD Data
Product type description:
EX-BNS 33-(1)Z(2)-(3)3G/D

(1)
111 NO contact / 1 NC contact
121 NO contact/2 NC contacts

(2)
withoutwithout LED
Gwith LED

(3)
2187Individual contact outlet (without LED switching conditions display LED)
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Individual contact outlet
  • Explosion protection for ATEX Zones 2 and 22
  • Thermoplastic enclosure
  • 88 mm x 25 mm x 13 mm
  • Concealed mounting possible
  • Insensitive to transverse misalignment
  • no mechanical wear

Ordering data

Product type description

EX-BNS 33-02ZG-2187-3G/D 5,0M

Article number (order number)

101192970

EAN (European Article Number)

4030661354415

eCl@ss number, version 11.0

27-27-24-02

eCl@ss number, version 9.0

27-27-24-02

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Explosion protection

Explosion protection: regulations

EN IEC 60079-0

EN IEC 60079-15

EN IEC 60079-31

Explosion protection zones

22

2

Explosion protection category

3D

3G

Explosion protection designation

D II 3G Ex nC IIC T6 Gc X

D II 3D Ex tc IIIC T80°C Dc X

Manufacturer declaration

ATEX Zone 2 and 22

General data

Housing construction form

Block

Installation conditions (mechanical)

not flush

Enclosure material

Glass-fibre, reinforced thermoplastic

Gross weight

202 g

General data - Features

Short circuit detection

Yes

Cross-circuit detection

Yes

Integral system diagnostics, status

Yes

Prerequisite evaluation unit

Yes

Number of normally closed (NC)

2

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

25,000,000 Operations

Mechanical data

Active area

lateral

Actuating element

Magnet

Note (Repeat accuracy R)

NOTE_DIM_DIST_REPEAT_ACCURACYFMAW00000002

Impact energy, maximum

2 J

Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" Sao

5 mm

Assured switching distance "OFF" Sar

15 mm

Mechanical data - Connection technique

Termination

Cable

Length of cable

5 m

Wire cross-section

0.25 mm2

Wire cross-section

23 AWG

Material of the Cable mantle

PVC

Mechanical data - Dimensions

Length of sensor

13 mm

Width of sensor

88 mm

Height of sensor

25 mm

Ambient conditions

Degree of protection

IP67

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Electrical data

Voltage type

DC (direct current)

Switching voltage, maximum

24 VDC

Switching current, maximum

0.01 A

Switching capacity, maximum

0.2 W

Switching frequency, maximum

5 Hz

Electrical data - Digital Output

Design of control elements

Miscellaneous, Reed contacts

Status indication

Note (Integral System Diagnostics, status )

The LED is illuminated when the guard door is open.

Scope of delivery

Scope of delivery

Actuators must be ordered separately.

Accessory

Recommendation (actuator)

EX-BPS 33-3G/D

Recommended safety switchgear

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Contact symbols shown for the closed condition of the guard device.

The contact configuration for versions with or without LED is identical.


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 08/12/2022, 02:13