TS 064-03Y

Item number: 101057480

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

T(1) 064-(2)Y-(3)


(1)
SPlunger S
JOffset roller lever J
XOffset roller lever X

(2)
033 NC contact
121 NO contact/2 NC contacts
212 NO contacts/1 NC contact
303 NO contacts
044 NC contact
131 NO contacts/3 NC contact
222 NO contacts/2 NC contact
313 NO contacts/1 NC contact
404 NO contacts

(3)
UESlow action with overlapping contacts
HSlow action with staggered contacts
RLatching 2 x 45°
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Metal enclosure
  • 184 mm x 111 mm x 149 mm (basic component)
  • 2 cable entries M 25 x 1.5
  • 3 or 4 Contacts
  • Actuator heads can be repositioned by 4 x 90°

Ordering data

Product type description

TS 064-03Y

Article number (order number)

101057480

EAN (European Article Number)

4030661027029

eCl@ss number, version 12.0

27-27-06-01

eCl@ss number, version 11.0

27-27-06-01

eCl@ss number, version 9.0

27-27-06-01

ETIM number, version 7.0

EC000030

ETIM number, version 6.0

EC000030

Approvals - Standards

Certificates

cULus

CCC

EAC

General data

Standards

EN IEC 60947-5-1

Working principle

mechanical

Slide form

Sphere

Enclosure material

Grey cast iron, galvanised

Enclosure coating material

painted

Material of the contacts, electrical

Silver

Gross weight

3,220 g

General data - Features

Number of normally closed (NC)

3

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

2,000,000 Operations

Mechanical data

Actuating element

Plunger

Mechanical life, minimum

1,000,000 Operations

Actuating angle

20 °

Contact opening

2 x 4 mm

Actuating speed, minimum

600 mm/min

Actuating speed, maximum

1 m/s

Note (Actuating speed)

Actuating speed with vertical actuating angle to switch axis

Mechanical data - Connection technique

Termination

Screw terminals M20 x 1.5

Cable section, minimum

1.5 mm²

Cable section, maximum

4 mm²

Note (Cable section)

All indications including the conductor ferrules.

Wire cross-section

11 AWG

Mechanical data - Dimensions

Length of sensor

149 mm

Width of sensor

156 mm

Height of sensor

111 mm

Diameter of the Plunger

10 mm

Ambient conditions

Degree of protection

IP65

Ambient temperature, minimum

-30 °C

Ambient temperature, maximum

+90 °C

Ambient conditions - Insulation values

Rated insulation voltage Ui

500 V

Rated impulse withstand voltage Uimp

6 kV

Electrical data

Thermal test current

25 A

Utilisation category AC-15

400 VAC

Utilisation category AC-15

25 A

Switching element

Opener (NC)

Note (Switching element)

with double break

Switching principle

Slow action

Switching frequency

1,000 /h

Note

Note (General)

Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch.


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 05/12/2022, 12:01