BNS 260 STW-AS-R

Item number: 101186157
BNS 260 STW-AS-R

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BNS 260 (1)-AS-(2)


(1)
withoutConnecting cable (2 m)
STGConnecting cable with M12 connector, straight, 4-pole
STWPre-wired cable with connector plug M12, angled, 4 pole

(2)
LDoor hinge on the left-hand side
RDoor hinge on the right-hand side
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • 2 m Pre-wired cable with connector M12, angled, 4-pole
  • Safety sensor
  • Thermoplastic enclosure
  • no mechanical wear
  • 36 mm x 26 mm x 13 mm
  • Integrated AS-Interface
  • Concealed mounting possible
  • Long life
  • Insensitive to transverse misalignment
  • Insensitive to soiling
  • AS-Interface LED and status display

Ordering data

Product type description

BNS 260 STW-AS-R
Article number (order number)

101186157
EAN (European Article Number)

4030661333670
eCl@ss number, version 12.0

27-27-44-01
eCl@ss number, version 11.0

27-27-24-02
eCl@ss number, version 9.0

27-27-24-02
ETIM number, version 7.0

EC002544
ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

TÜV

cULus

ASi-SaW

General data

Standards

EN IEC 62026-2

EN ISO 13849-1

EN IEC 60947-5-3

EN IEC 61508
Working principle

Magnetic drive
Installation conditions (mechanical)

quasi-flush
Housing material

Glass-fibre, reinforced thermoplastic
Reaction time, maximum

100 ms
Gross weight

100 g

General data - Features

Coding

Yes
Integral system diagnostics, status

Yes

Safety classification

Standards

EN IEC 61508
Performance Level, up to

e
Category

4
PFH value

6.21 x 10⁻⁹ /h
Note (PFH-value)

up to max. 500,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in

3
Mission time

20 Year(s)

Mechanical data

Actuating element

Magnet
Door hinge

Right
Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn)

Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" Sao

5 mm
Assured switching distance "OFF" Sar

15 mm
Note (Repeat accuracy R)

Wiederholgenauigkeit R ≤ 0,1 x Sao

Mechanical data - Connection technique

Length of cable

2 m
Termination

Pre-wired cable with M12 connector angled, 4-pole
Wire cross-section

0.23 mm2
Wire cross-section

23 AWG
Material of the Cable mantle

LSYY

Mechanical data - Dimensions

Length of sensor

13 mm
Height of sensor

26 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +60 °C
Storage and transport temperature

-25 ... +70 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms
Protection class

II

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VDC
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

III
Degree of pollution

3

Electrical data - AS Interface

Rated operating voltage

18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum

50 mA

Electrical data - AS-Interface specification

AS-i Specification

Safety-Slave
AS-i Version

V 2.1
AS-i Profile

S-0.B.F.E
AS-i, IO-Code

0x0
AS-i, ID-Code

0xB
AS-i, ID-Code1

0xF
AS-i, ID-Code2

0xE
AS-i Input, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3

No Function
AS-i Parameter bits, P0 ... P3

No function
Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF)

FID: periphery error
AS-i Input module address

0
Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Status indication

Note (LED switching conditions display)

(1) LED green: Supply voltage

(2) red LED: AS-i communication error / Slave address = 0

Pin assignment

PIN 1

AS-i +
PIN 2

n.c.
PIN 3

AS-Interface -
PIN 4

n.c.

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 260-1

BPS 260-2

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 4/23/2024, 10:51 PM