SEPK02.0.3.1.22/95

Item number: 101027370

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
Product type description:
SEPK02.0.(1).(2).(3)/(4).(5)
SEPG05.3.(1).(2).(3)/(4).(5)
SEP01.0.(1).(2).(3)/(4).(5)
SEP01.4.(1).(2).(3)/(4).(5)
SEPLC05.2.(1).(2).(3)/(4).(5)
SEP07.0.(1).(2).(3)/(4).(5)
SEP09.0.(1).(2).(3)/(4).(5)

Command devices make and head diameter (control parts / emergency stop) depending on ➁ (with SEP09.0... emergency stop not featured)

(1)
1Schmersal 55 mm / Schmersal 49 mm
2Schmersal 42 mm / Schmersal 49 mm or Siemens 40 mm / Schmersal 49 mm
3Schmersal 42 mm / Schmersal 38,5 mm or Siemens 40 mm / Siemens 40 mm
4Schmersal 55 mm / Schmersal 38,5 mm
LEmpty enclosure with 22.3 mm holes (no command devices installed)
S-XXXXSpecial version with 4-digit serial number

(2)
0Command devices from Schmersal
1Command devices from Schmersal or Schmersal / Siemens

(3)
0Installation diameter of command devices (22.3 mm)
1Installation diameter of command devices (30.5 mm)

(4)
95NC contacts and NO contacts of control parts in separated form

(5)
E1Mushroom button with actuating force 10.5 N
E2Mushroom button with actuating force 7.0 N
Z1Emergency stop with 2 NC contacts and 2 NO contacts (not with SEPK02.0....)
Z2Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent instead of emergency stop)
Z3Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent instead of emergency stop)
Z4Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent in addition to emergency stop)
Z5Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent in addition to emergency stop)
Z6Pre-punched Al panel with 11 x Ø 22.3 mm holes (only for SEPLC05.2...)
Z7As with Z6 though holes are sealed with dummy plugs (only for SEPLC05.2...)
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Thermoplastic enclosure
  • 2 black operating buttons (positioning parts) Ø 55
  • 1 Emergency Stop button in thermoplastic version
  • Stand and wall mounting possible
  • 2 part enclosure

Ordering data

Product type description

SEPK02.0.3.1.22/95

Article number (order number)

101027370

EAN (European Article Number)

4250116202829

eCl@ss number, version 12.0

27-37-12-19

eCl@ss number, version 11.0

27-37-12-19

eCl@ss number, version 9.0

27-37-12-19

ETIM number, version 7.0

EC001260

ETIM number, version 6.0

EC001260

Approvals - Standards

Certificates

cULus

General data

Standards

EN ISO 13850

EN ISO 13851

EN IEC 60947-5-1

EN IEC 60947-5-5

EN IEC 60947-1

Housing material

Plastic

Gross weight

1,900 g

General data - Features

Suitable for EMERGENCY-OFF

Yes

Construction kit possible

Yes

Number of Emergency Stop button

1

Number of normally closed (NC)

1

Number of normally open (NO)

1

Number of operating push buttons (positioning parts)

2

Mechanical data

Mechanical life, minimum

10,000,000 Operations

Mechanical data - Connection technique

Termination

Screw terminals M20 x 1.5

Cable section, maximum

1.5 mm²

Mechanical data - Dimensions

Width

469 mm

Height

185 mm

Depth

137 mm

Length x Width x Height

Operating push buttons (positioning parts): 55 mm

Emergency stop pushbutton: 40 mm

Ambient conditions

Degree of protection

IP65

Ambient conditions - Insulation values

Rated insulation voltage Ui

440 V

Electrical data

Thermal test current

10 A

Utilisation category AC-15

250 VAC

Utilisation category AC-15

8 A

Utilisation category DC-13

24 VDC

Utilisation category DC-13

5 A

Accessory

Recommendation (product combination)

SRB201ZH

SRB200ZHX1

SRB 201ZHX3

Note

Note (General)

1 NO/1 NC contact per unit, 1 NO/1 NC contact for Emergency-Stop

Optional: actuators with low actuating force

8 knockouts for additional operating devices Ø 22.3 mm

Language filter

Download the latest version of Adobe Reader

EU Conformity Declaration
EU-Konformitätserklärung LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Erklärung:Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen.
Bezeichnung des Bauteils:SEPK02.0… / SEPG05.3… / SEP01.0… / SEP01.4… /
SEPLC05.2… / SEP07… / SEP09.0…
Typ:siehe Typenschlüssel
Beschreibung des Bauteils:Zweihandbedienpult mit1) und ohne NOT-HALT (optional mit Ständer)
Einschlägige Richtlinien:1) Maschinenrichtlinie2006/42/EG
 Niederspannungsrichtlinie2014/35/EU
 RoHS-Richtlinie2011/65/EU
Angewandte Normen:EN ISO 13851:2019
EN 60947-5-1:2017
1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017
Bevollmächtigter für die Zusammenstellung der technischen Unterlagen:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Ort und Datum der Ausstellung:Wuppertal, 2. Dezember 2020
 GRA_SIG_ksig-y24
 Rechtsverbindliche Unterschrift
Philip Schmersal
Geschäftsführer

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 4/18/2024, 12:11 PM