.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
MSP 452-11/11Y-2186
MSP 452-11/11Y-2186
Downloads
- 2 cable entries
- additional nameplate with date of manufacture in the cover
- Metal enclosure
- 4 Contacts
- 118 mm x 174 mm x 64 mm
Ordering data
| Product type description |
MSP 452-11/11Y-2186 |
| Article number (order number) |
101127983 |
| EAN (European Article Number) |
4030661031873 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
| Certificates |
CCC |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mekaaninen |
| Housing material |
Valurauta, sinkitty |
| Housing coating material |
polttomaalattu |
| Gross weight |
1 700 g |
General data - Features
| Number of normally closed (NC) |
2 |
| Number of normally open (NO) |
2 |
Mechanical data
| Mechanical life, minimum |
3 000 000 Operations |
| Contact opening |
2 x 0,5 mm |
| Actuating torque |
0,2 Nm |
Mechanical data - Connection technique
| Termination |
Ruuviliitäntä M20 x 1.5 |
| Cable section, minimum |
1,5 mm² |
| Cable section, maximum |
2,5 mm² |
| Note |
Kaapelitiedoissa johtimet ovat holkitettuja. |
| Wire cross-section |
12 AWG |
Mechanical data - Dimensions
| Length of sensor |
64 mm |
| Width of sensor |
118 mm |
| Height of sensor |
174 mm |
| Diameter of the Plunger |
10 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +90 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2,5 A |
| Switching principle |
Momenttikosketin |
| Bounce duration, maximum |
43 221 ms |
| Switchover time, maximum |
10 ms |
Note
| Note (General) |
This rotating spindle limit switch with snap-action insert is only fit for use in normal to average operating conditions, e.g. for machine tools, cranes and conveyors. Protection class IP 65 to IEC/EN 60529. By reversing the contacts, the spindle revolutions can be set between 4 and 55 revolutions The run-out towards each side is at least 5 revolutions. |
Kielisuodatin
Tuotelehti
Käyttöohjeet ja vaatimuksenmukaisuusvakuutus
CCC-sertifiointi
Lattaa Adobe Readerin viimeisin versio
Tuotekuva( luettelokuva)
Perustuotteen mitat
Kosketin kiinni
Kosketin auki
Asetusalue
Avautumispiste
Pakkoavauskulma
101061957 M 6820-11-6E EINSATZ
- Switch unit for rotating spindle limit switch MSP
- Screw connection
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Tiedot ja arvot on tarkastettu huolellisesti. Kuvat voivat poiketa alkuperäisestä. Tarkemmat tekniset tiedot löytyvät manuaalista. Pidätämme oikeuden teknisiin muutoksiin ja virheisiin.
Luotu: 7.4.2025 16.40