schmersal_s_icon.png

BNS 333-01YD-M20

Numéro d'article: 101169806

Téléchargements

TraceParts Données
ePLAN Données
Désignation produit:

BNS 333-01Y(1)-M20


(1)
VActionnement par le dessus
RActionnement par la droite
LActionnement par la gauche
DActionnement par l'avant
UActionnement par l'arrière
Il est possible que certains appareils suivant cet exemple de commande ne soient pas livrables et/ou techniquement réalisables.
  • 1 Cable entry M 20 x 1.5
  • Thermoplastic enclosure
  • Long life
  • Suitable for food processing industry only in combination with BPS 303
  • no mechanical wear
  • 40 mm x 112 mm x 40 mm
  • Insensitive to transverse misalignment
  • Insensitive to soiling
  • Wiring compartment
  • With integral evaluation

Ordering data

Product type description

BNS 333-01YD-M20

Article number (order number)

101169806

EAN (European Article Number)

4030661296517

eCl@ss number, version 12.0

27-27-44-01

eCl@ss number, version 11.0

27-27-24-02

eCl@ss number, version 9.0

27-27-24-02

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

General data

Standards

BG-GS-ET-14

EN IEC 60947-5-3

Coding level according to EN ISO 14119

faible

Working principle

magnétique

Installation conditions (mechanical)

quasiment bord à bord

Housing material

Plastique, thermoplastique renforcé de fibres de verre

Duration of risk, maximum

50 ms

Gross weight

150 g

General data - Features

Coding

Oui

Integral system diagnostics, status

Oui

Safety monitoring module integrated

Oui

Number of normally closed (NC)

1

Number of safety contacts

1

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

20.000.000 Operations

Mechanical data

Active area

côté couvercle

Actuating element

Aimant

Direction of motion

Frontale par rapport à la face active

Mechanical data - Switching distances

Assured switching distance "ON" Sao

4 mm

Assured switching distance "OFF" Sar

14 mm

Note (switching distance)

All switching distances in accordance EN IEC 60947-5-3

Mechanical data - Connection technique

Termination

Raccord fileté M20 x 1.5

Cable section, minimum

2 x 0,75 mm²

Cable section, maximum

2 x 1,5 mm²

Note

Toutes les indications relatives à la section du câble sont embouts compris.

Wire cross-section

15 AWG

Mechanical data - Dimensions

Length of sensor

40 mm

Width of sensor

40 mm

Height of sensor

112 mm

Ambient conditions

Degree of protection

IP65

Ambient temperature

-25 ... +55 °C

Storage and transport temperature

-25 ... +70 °C

Resistance to vibrations

10…55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Electrical data

Switching voltage, maximum

250 VAC

Switching current, maximum

5 A

Switching capacity, maximum

1.250 W

Switching element

1 contacts NF

Time to readiness, maximum

50 ms

Switching frequency, maximum

5 Hz

Status indication

Note (Integral System Diagnostics, status )

La LED s'allume quand la porte est fermée.

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 300

BPS 303

BPS 303 SS

Recommended safety switchgear

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Symboles des contacts, protecteur fermé.

Diagramme de contact

EU Conformity Declaration
Déclaration UE de conformité LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Déclaration:Par la présente, nous certifions que les composants identifiés ci-après répondent de par leur conception et leur construction aux exigences des Directives Européennes applicables.
Désignation du composantBNS 333
Type:voir exemple de commande
Description du composant:Capteur de sécurité avec module de sécurité intégré
Directives pertinentes:Directive Machines2006/42/CE
 Directive CEM2014/30/EU
 Directive RoHS2011/65/EU
Normes appliquées:EN 60947-5-3:2013
EN ISO 13849-1:2023
EN ISO 13849-2:2012
Organisme notifié pour la
Certification du système d'assurance qualité
conformément à l'annexe X, 2006/42/CE :
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein, 51105 Köln
N° d'ident.: 0035
Représentant autorisé à préparer et composer la documentation technique:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Lieu et date de l'émission:Wuppertal, le 31 Octobre 2024
 GRA_SIG_ksig-y24
 Signature à l'effet d'engager la société
Philip Schmersal
Président Directeur Général

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

Les données et les valeurs ont été soigneusement vérifiées. Les illustrations peuvent être différentes de l'original. Vous trouverez d'avantage de caractéristiques techniques dans les manuels d’instructions. Sous réserve de modifications techniques et errata.

Généré le: 09/09/2025 13:08