AES 1176

品番: 101170044

アーカイブ

AES 1176

品番: 101170044

Downloads

寸法 CADデータ

eプラン データ

CADENAS CADデータ

SISTEMA データ

Monitoring of BNS range magnetic safety sensors
3 safety contacts, STOP 0

Ordering data

Note (Delivery capacity)	Not available!
Product type description	AES 1176
Article number (order number)	101170044
EAN (European Article Number)	4030661297019
eCl@ss number, version 12.0	27-37-18-19
eCl@ss number, version 11.0	27-37-18-19
eCl@ss number, version 9.0	27-37-18-19
ETIM number, version 7.0	EC001449
ETIM number, version 6.0	EC001449

Approvals - Standards

Certificates	cULus

General data

Standards	BG-GS-ET-14 BG-GS-ET-20 EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 60204-1 EN IEC 60947-1
Climatic stress	EN 60068-2-3 BG-GS-ET-14
Housing material	グラスファイバー強化熱可塑性樹脂、換気口付き
Gross weight	155 g

General data - Features

Wire breakage detection	Yes
Cross-circuit detection	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Start-up test	Yes
Reset after disconnection of supply voltage	Yes
Earth connection detection	Yes
Integral system diagnostics, status	Yes
Number of LEDs	1
Number of normally closed (NC)	1
Number of normally open (NO)	1
Number of safety contacts	1

Safety classification

Vorschriften	EN ISO 13849-1 EN IEC 61508
Stop-Category	0

Safety classification - Relay outputs

Performance Level, up to	d
Category	3
PFH value	1.00 x 10⁻⁷ /h
Notice	for max. 50,000 switching cycles/year and max. 80% contact load
Safety Integrity Level (SIL), suitable for applications in	2
Mission time	20 Year(s)

Mechanical data

Mechanical life, minimum	20,000,000 Operations
Mounting	EN 60715に基づくDINレールにワンタッチ取り付け

Mechanical data - Connection technique

Terminal designations	IEC/EN 60947-1
Termination	単線 / 撚線ネジ端子 M20 x 1.5
Cable section, minimum	0.25 mm²
Cable section, maximum	2.5 mm²
Tightening torque of Clips	0.6 Nm

Mechanical data - Dimensions

Width	22.5 mm
Height	100 mm
Depth	121 mm

Ambient conditions

Degree of protection of the enclosure	IP40
Degree of protection of the mounting space	IP54
Degree of protection of clips or terminals	IP20
Ambient temperature	+0 ... +55 °C
Storage and transport temperature	-25 ... +70 °C
Resistance to vibrations	10 ~ 55 Hz、振幅 0.35 mm、± 15 %
Restistance to shock	30 g / 11 ms

Ambient conditions - Insulation values

Rated impulse withstand voltage U_imp	4 kV
Overvoltage category	III
Degree of pollution	2

Electrical data

Frequency range	50 Hz 60 Hz
Operating voltage	24 VAC -15 % / +10 % 24 VDC -10 % / +20 %
Ripple voltage	10 %
Thermal test current	6 A
Rated operating voltage	24 VAC
Rated operating voltage	24 VDC
Rated AC voltage for controls, 50 Hz, minimum	20.4 VAC
Rated control voltage at AC 50 Hz, maximum	26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum	20.4 VAC
Rated control voltage at AC 60 Hz, maximum	26.4 VAC
Rated AC voltage for controls at DC minimum	20.4 VDC
Rated control voltage at DC, maximum	28.8 VDC
Electrical power consumption	5 W
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	新しい状態で
Drop-out delay in case of power failure, typically	80 ms
Drop-out delay in case of emergency, typically	20 ms
Pull-in delay at automatic start, maximum, typically	100 ms
Pull-in delay at RESET, typically	20 ms
Material of the contacts, electrical	Ag-Ni 10および0.2 µm 金メッキ

Electrical data - Safe relay outputs

Voltage, Utilisation category AC-15	230 VAC
Current, Utilisation category AC-15	6 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	6 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	250 VAC
Switching capacity, maximum	8 A

Electrical data - Digital inputs

Input signal, HIGH Signal "1"	10 … 30 VDC
Input signal, LOW Signal "0"	0 … 2 VDC
Conduction resistance, maximum	40 Ω

Electrical data - Digital Output

Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.1 A

Electrical data - Relay outputs (auxiliary contacts)

Switching capacity, maximum	24 VDC
Switching capacity, maximum	2 A

Electrical data - Electromagnetic compatibility (EMC)

EMC rating	EMC-Directive

Integral system diagnosis (ISD)

Note (ISD -Faults)	The following faults are registered by the safety monitoring modules and indicated by ISD.
Faults	Failure of the safety relay to pull-in or drop-out Failure of door contacts to open or close Cross-wire or short-circuit monitoring of the switch connections Interruption of the switch connections Fault on the input circuits or the relay control circuits of the safety monitoring module

Other data

Note (applications)	セーフティセンサーガードシステム

Note

Note (General)	Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Wiring example

Note (Wiring diagram)	The wiring diagram is shown with guard doors closed and in de-energised condition. To secure a guard door up to PL d and Category 3 Monitoring 1 guard door(s), each with a magnetic safety sensor of the BNS range If the load is directly switched by the AES, the complete system can be classified in Category 3 to EN ISO 13849-1. The two relays K3/K4 are directly controled through the additional transistor outputs Y1/Y2. One NC contact of the relay is always connected to inputs X1/X2.