.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
SLC240COM-ER-1290-14
SLC240COM-ER-1290-14
| Oznaczenie typu produktu: SLC240COM-ER(1)-(2) |
| (1) | |
| 0330 | Wysokość obszaru zabezpieczanego 330 mm |
| 0410 | Wysokość obszaru zabezpieczanego 410 mm |
| 0490 | Wysokość obszaru zabezpieczanego 490 mm |
| 0570 | Wysokość obszaru zabezpieczanego 570 mm |
| 0650 | Wysokość obszaru zabezpieczanego 650 mm |
| 0730 | Wysokość obszaru zabezpieczanego 730 mm |
| 0810 | Wysokość obszaru zabezpieczanego 810 mm |
| 0890 | Wysokość obszaru zabezpieczanego 890 mm |
| 0970 | Wysokość obszaru zabezpieczanego 970 mm |
| 1050 | Wysokość obszaru zabezpieczanego 1050 mm |
| 1130 | Wysokość obszaru zabezpieczanego 1130 mm |
| 1210 | Wysokość obszaru zabezpieczanego 1210 mm |
| 1290 | Wysokość obszaru zabezpieczanego 1290 mm |
| 1370 | Wysokość obszaru zabezpieczanego 1370 mm |
| 1450 | Wysokość obszaru zabezpieczanego 1450 mm |
| 1530 | Wysokość obszaru zabezpieczanego 1530 mm |
| 1610 | Wysokość obszaru zabezpieczanego 1610 mm |
| 1690 | Wysokość obszaru zabezpieczanego 1690 mm |
| 1770 | Wysokość obszaru zabezpieczanego 1770 mm |
| 1850 | Wysokość obszaru zabezpieczanego 1850 mm |
| 1930 | Wysokość obszaru zabezpieczanego 1930 mm |
| (2) | |
| 14 | Rozdzielczość 14 mm |
| 30 | Rozdzielczość 30 mm |
| 35 | Rozdzielczość 35 mm |
- Safety type 2 in accordance with IEC 61496-1
- User-friendly parameter setting, no tools required
- Reliable safety concept in case of interferences (EMC, welding sparks)
- Process safety with highest availability
- active integrated set-up tool
Ordering data
| Product type description |
SLC240COM-ER-1290-14 |
| Article number (order number) |
103016239 |
| EAN (European Article Number) |
4030661507101 |
| eCl@ss number, version 12.0 |
27-27-27-04 |
| eCl@ss number, version 11.0 |
27-27-27-04 |
| eCl@ss number, version 9.0 |
27-27-27-04 |
| ETIM number, version 7.0 |
EC002549 |
| ETIM number, version 6.0 |
EC002549 |
Approvals - Standards
| Certificates |
cULus |
General data
| Standards |
EN IEC 61496-2 EN IEC 61496-1 |
| Note (Software Version) |
as of 2017 Version 1.0 |
| Master- or Slave-function |
Tak |
| Housing material |
Aluminium |
| Reaction time, maximum |
20 ms |
| Gross weight |
2.140 g |
| Radiation emission level to EN 12198-1 |
Category 0 |
| Risk group classification of lamp systems to EN 62471 |
free group |
General data - Features
| Cascadable |
Tak |
| Restart interlock (manual reset) |
Tak |
| Blanking function |
Tak |
| Integral system diagnostics, status |
Tak |
| Integral system diagnostics |
Tak |
| Number of fail-safe digital outputs |
2 |
| Number of beams |
128 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 EN IEC 62061 |
| Performance Level, up to |
c |
| Category |
2 |
| PFH value |
8,05 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in |
1 |
| Mission time |
20 Year(s) |
| Safety type in accordance with IEC 61496-1 |
2 |
Mechanical data
| Detection ability for test bodies at v = 1.6 m/s |
14 mm |
| Height of the protection field |
1.290 mm |
| Range, protection field, minimum |
0,3 m |
| Range, protection field, maximum |
7 m |
| Wave length of the laserdiode |
880 nm |
Mechanical data - Connection technique
| Termination |
Konektor |
| Terminal connector, Recipient |
Konektor M12, 5-polowy |
| Terminal, Connector, Transmitter |
Konektor M12, 4-polowy |
| Length of the connectable cable, maximum |
100 m |
Mechanical data - Dimensions
| Length of sensor |
33 mm |
| Width of sensor |
27,8 mm |
| Height of sensor |
1.331 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-10 ... +50 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz |
| Restistance to shock |
10 g, 16 ms, to EN 60028-2-29 |
| Protection class |
III |
Electrical data
| Operating voltage |
24 VDC -10 % / +10 % |
|
| Rated operating voltage |
24 VDC |
|
| Rated operating current, Emitter |
200 mA |
|
|
700 mA |
| Switching thresholds |
24 V (HIGH) 0 V (LOW) |
Electrical data - Control inputs
| Designation, Control inputs |
Reset and Test |
| Actuation time for manual start |
100 … 1500 ms |
Electrical data - Safety digital outputs
| Designation, Safety outputs |
OSSD 1 and OSSD 2 |
| Output current, (fail-safe output), maximum |
0,25 A |
| Design of control elements |
OSSD, short-circuit proof, p-type |
| Leakage current Ir, maximum |
1 mA |
| Test pulse interval, typical |
750 ms |
| Test pulse duration, maximum |
0,15 ms |
| Classification ZVEI CB24I, Source |
C2 |
| Classification ZVEI CB24I, Sink |
C1 C2 |
| Load capacity, maximum |
0,05 µF |
| Load inductance, maximum |
2 H |
| Note |
The load inductance generates an induced voltage during the switch-off, which compromises the downstream components (sparkquenching element). |
| Switching voltage |
15 … 26.4 V (HIGH) 0 … 2 V (LOW) |
| Note |
According to EN 61131-2 |
| Note |
In case of failure, the leakage current flows to the OSSD cable. The downstream control element must recognise this state as LOW. A safety PLC must detect this state. |
LED status display - LED 01
| LED status |
OSSD ON, OSSD OFF, Restart interlock, Error, Parameter setting, Alignment kit, Indication of signal quality |
| LED position |
Receiver |
Pin assignment
| Connection |
Receiver |
| PIN 1 |
24 VDC power supply |
| PIN 2 |
OSSD 1 Safety output 1 |
| PIN 3 |
0 VDC Power supply |
| PIN 4 |
OSSD 2 Safety output 2 |
| PIN 5 |
Reset Restart interlock (manual reset) |
| Connection |
Emitter |
| PIN 1 |
24 VDC power supply |
| PIN 2 |
Test Test input |
| PIN 3 |
0 VDC power supply |
| PIN 4 |
Slave Series wiring |
Scope of delivery
| Scope of delivery |
Zestaw z 2 kątownikami montażowymi |
Accessory
| Recommended safety switchgear |
SRB-E 301 |
Filtr językowy
Karta katalogowa
Instrukcja obsługi i deklaracja zgodności
Certyfikat UL
Broszura
Biblioteka/Library SISTEMA-VDMA
pobierz najnowszą wersję Adobe Reader
Zdjęcie produktu (pojedyncze zdjęcie katalogowe)
Rysunek wymiarowy Urządzenie podstawowe
Przykład okablowania
Układ zestyków
101216833 MS-1100
- Kit with 4 mounting angles
- for SLC/SLG 440, SLC/SLG440COM, SLC/SLG445
103000081 MS-1102
- Kit with 4 mounting angles
- Stainless steel (V4A)
- for SLC/SLG 440, SLC/SLG440COM, SLC/SLG445
101216834 MS-1110
- mounting kit for central fixation
- Kit with 2 mounting angles
- for SLC/SLG 440, SLC/SLG440COM, SLC/SLG445
103014374 SRB-E-301MC
- 1 Signalling contact
- Plug-in screw terminals with coding
- Suitable for applications up to Cat. 4 / PL e und up to SIL 3
- 1 or 2 channel signal evaluation
- Start / feedback circuit monitoring
- Optionally with short-circuit recognition
- 3 safety contacts, stop category 0
103010818 A-K5P-M12-S-G-10M-BK-2-X-A-4-69
- Pre-wired cable
- 5-pole
103010820 A-K5P-M12-S-G-15M-BK-2-X-A-4-69
- Pre-wired cable
- 5-pole
103010816 A-K5P-M12-S-G-5M-BK-2-X-A-4-69
- Pre-wired cable
- 5-pole
101207741 KA-0804
- for Transmitter
- Pre-wired cable
- 4-pole
- for SLC/SLG
101207742 KA-0805
- for Transmitter
- Pre-wired cable
- 4-pole
- for SLC/SLG
101207743 KA-0808
- for Transmitter
- Pre-wired cable
- 4-pole
- for SLC/SLG
| EU Declaration of Conformity |  |
| Original | Safety Control GmbH Am Industriepark 2a 84453 Mühldorf / Inn Germany |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SLC240COM SLG240COM |
| Type: | See ordering code |
| Description of the component: | Safety light curtain / safety light grid |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 61496-1:2013 EN 61496-2:2013 EN ISO 13849-1:2015 EN 62061:2005 + A1:2013 |
| Notified body for Type Examination: | TÜV NORD CERT GmbH Langemarckstr. 20, 45141 Essen ID n°: 0044 |
| EC-Type Examination Certificate: | 44 205 16 019909 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Mühldorf, July 10, 2017 |
 |  |
| Authorised signature Klaus Schuster Managing Director | Authorised signature Christian Spranger Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Dane zostały starannie sprawdzone. Zdjęcia mogą odbiegać od rzeczywistości. Dalsze dane techniczne znajdują się w instrukcji obsługi. Możliwe są zmiany i błędy techniczne.
Wygenerowano dnia 11.08.2025, 23:25