.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
SRB301ST-24V-(V.2)
项目编号:
103006151
- Suitable for the signal processing of outputs with contact sensors
- Suitable for signal processing of outputs connected to potentials (AOPDs), e.g. safety light grids/curtains
- Suitable for the signal processing of outputs with contact sensors
- 3 safety contacts, STOP 0
- 1 Signalling output
Ordering data
| Product type description |
SRB301ST-24V-(V.2) |
| Article number (order number) |
103006151 |
| EAN (European Article Number) |
4030661521589 |
| eCl@ss number, version 12.0 |
27-37-18-19 |
| eCl@ss number, version 11.0 |
27-37-18-19 |
| eCl@ss number, version 9.0 |
27-37-18-19 |
| ETIM number, version 7.0 |
EC001449 |
| ETIM number, version 6.0 |
EC001449 |
| Notice |
停售产品 |
Approvals - Standards
| Certificates |
TÜV cULus CCC TILVA |
General data
| Standards |
EN IEC 62061 EN 81-20/-50 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1 |
| Climatic stress |
EN 60068-2-78 |
| Housing material |
玻璃纤维加固热塑塑料，带通风 |
| Gross weight |
283 g |
General data - Features
| Electronic Fuse |
是 |
| Wire breakage detection |
是 |
| Cross-circuit detection |
是 |
| Removable Terminals |
是 |
| Start input |
是 |
| Feedback circuit |
是 |
| Automatic reset function |
是 |
| Reset edge detection |
是 |
| Earth connection detection |
是 |
| Integral system diagnostics, status |
是 |
| Number of auxiliary contacts |
1 |
| Number of LEDs |
5 |
| Number of normally closed (NC) |
2 |
| Number of safety contacts |
3 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 EN IEC 62061 EN IEC 61508 |
| Stop-Category |
0 |
| Safety classification - Relay outputs |
| Performance Level, stop 0, up to |
e |
| Category, Stop 0 |
4 |
| Diagnostic Coverage (DC) Level, Stop 0 |
≥ 99 % |
| PFH value, Stop 0 |
2.00 x 10⁻⁸ /h |
| Safety Integrity Level (SIL), Stop 0, suitable for applications in |
3 |
| Mission time |
20 Year(s) |
| Common Cause Failure (CCF), minimum |
65 |
Mechanical data
| Mechanical life, minimum |
10,000,000 Operations |
| Mounting |
DIN导轨快速安装，依据EN 60715 |
Mechanical data - Connection technique
| Terminal designations |
IEC/EN 60947-1 |
| Termination |
硬线或软线 螺栓连接，插入 |
| Cable section, minimum |
.25 mm² |
| Cable section, maximum |
2.5 mm² |
| Tightening torque of Clips |
0.6 Nm |
Mechanical data - Dimensions
| Width |
22.5 mm |
| Height |
120 mm |
| Depth |
121 mm |
Ambient conditions
| Degree of protection of the enclosure |
IP40 |
| Degree of protection of the mounting space |
IP54 |
| Degree of protection of clips or terminals |
IP20 |
| Ambient temperature |
-25 ... +60 °C |
| Storage and transport temperature |
-40 ... +85 °C |
| Resistance to vibrations |
10 ... 55 Hz, 振幅 .35 mm |
| Restistance to shock |
30 g / 11 ms |
Ambient conditions - Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
| Overvoltage category |
III |
| Degree of pollution |
2 |
Electrical data
| Frequency range |
50 Hz 60 Hz |
| Operating voltage |
24 VAC -15 % / +10 % |
| Ripple voltage |
10 % |
| Rated operating voltage |
24 VAC |
| Rated operating voltage |
24 VDC |
| Rated AC voltage for controls, 50 Hz, minimum |
20.4 VAC |
| Rated control voltage at AC 50 Hz, maximum |
26.4 VAC |
| Rated AC voltage for controls, 60 Hz, minimum |
20.4 VAC |
| Rated control voltage at AC 60 Hz, maximum |
26.4 VAC |
| Rated AC voltage for controls at DC minimum |
20.4 VDC |
| Rated control voltage at DC, maximum |
28.8 VDC |
| Electrical power consumption |
2 W |
| Electrical power consumption |
4.9 VA |
| Contact resistance, maximum |
0.1 Ω |
| Note (Contact resistance) |
处于全新的状态 |
| Drop-out delay in case of power failure, typically |
80 ms |
| Drop-out delay in case of emergency, typically |
20 ms |
| Pull-in delay at automatic start, maximum, typically |
100 ms |
| Pull-in delay at RESET, typically |
20 ms |
| Material of the contacts, electrical |
氧化锡银，自清洁，强制定位 |
Electrical data - Safe relay outputs
| Voltage, Utilisation category AC-15 |
230 VAC |
| Current, Utilisation category AC-15 |
6 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
6 A |
| Switching capacity, minimum |
10 VDC |
| Switching capacity, minimum |
10 mA |
| Switching capacity, maximum |
250 VAC |
| Switching capacity, maximum |
8 A |
Electrical data - Digital inputs
| Conduction resistance, maximum |
40 Ω |
Electrical data - Relay outputs (auxiliary contacts)
| Switching capacity, maximum |
24 VDC |
| Switching capacity, maximum |
2 A |
Electrical data - Electromagnetic compatibility (EMC)
| EMC rating |
EMC指令 |
Status indication
| Note (LED switching conditions display) |
QS：交叉短路检测状态（当交叉短路检测处于激活状态时，LED亮起）。 |
| Indicated operating states |
位置继电器 K2 位置继电器 K1 内部工作电压 Ui |
Other data
| Note (applications) |
安全传感器 防护系统 紧急停止按钮 紧急停止拉绳开关 安全光电开关 |
Note
| Note (General) |
感应负载（例如接触器、继电器等）必须通过适当的电路抑制。 |
Wiring example
| Note (Wiring diagram) |
接线图显示的是防护门关闭且处于断电状态的情况。 输入电平：该示例显示了带有两个限位开关的防护门监控的双通道控制，其中一个限位开关具有肯定断开、外部重置按钮（R）和反馈电路（H2）。 继电器输出：适用于双通道控制，用于增强触点容量或增加触点数量，通过使用接触器或带强制定位触点的继电器。 控制器可以识别监控电路中的交叉短路、电缆断裂和接地泄漏。 开关设置：交叉线短路检测功能（出厂默认值）通过模块前盖下方的开关进行编程：预设nQS（顶部）：无交叉线短路保护，适用于单通道应用和控制电路中有电位输出的应用。位置QS（下）：带交叉短路保护，适用于双通道应用，控制回路中无带电势的输出端。 对于单通道控制，连接NC触点至S11/S12 并桥接S12/S22（QS开关=nQS） 将安全光栅/光幕的P型输出连接到S12/S22。设备必须具有相同的参考电位。QS-开关 = nQS 自动启动：通过将反馈回路与端子S12/X3相连来设定自动启动程序。如果无需反馈回路，则必须以桥接代替。 F1 = 混合保险丝 |
语言条件
数据表
操作指南及符合性声明
BG检测证书
TÜV认证
SISTEMA-VDMA 数据库
下载最新版本的Adobe Reader
产品图片（单独目录照片）
接线图示
接线图示
接线图示
符号（技术标准）
Alternative or replacement product
103007672 SRB-E-301ST
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 1 Auxiliary contact
- 3 safety contacts
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | SRB301STV.2, SRB301ST/CCV.2, SRB301ST/PCV.2, SRB301STV.3, SRB301ST/CCV.3, SRB301ST/PCV.3 |
| Year of construction: | see enclosure seal SRB301ST... |
| Description of the component: | Safety relay module for emergency stop circuits, guard door monitoring, magnetic safety switches, AOPDs and for use in firing systems |
| Relevant legislation: | Supply of Machinery (Safety) Regulations 1) | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| Lift regulations 2) | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 50156-1:2015 EN 60947-5-1:2017 + AC:2020 EN 60947-5-3:2013 EN ISO 13850:2015 EN 81-20:2020 EN 81-50:2020 EN ISO 13849-1:2015 |
| Approved body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| Type examination certificate: | 1) 01/205/5284.02/22 2) 01/208/4A/6110.01/21 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, October 13, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SRB301STV.2 SRB301ST/CCV.2 SRB301ST/PCV.2 SRB301STV.3 SRB301ST/CCV.3 SRB301ST/PCV.3 |
| Year of construction: | see enclosure seal SRB301ST... |
| Description of the component: | Safety relay module for emergency stop circuits, guard door monitoring, magnetic safety switches, AOPDs and for use in firing systems |
| Relevant Directives: | Machinery Directive 1) | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| Lift Directive 2) | 2014/33/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 50156-1:2015 EN 60947-5-1:2017 + AC:2020 EN 60947-5-3:2013 EN ISO 13850:2015 EN 81-20:2020 EN 81-50:2020 EN ISO 13849-1:2015 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| EC-Type Examination Certificate: | 1) 01/205/5284.02/22 2) 01/208/4A/6110.01/21 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, October 13, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/4/4 下午1:55
最近浏览
