PROTECT-PE-11-SK
PROTECT-PE-11-SK
Downloads
Codice: PROTECT-PE-(1)-(2) |
(1) | |
02 | 2 contatti d'apertura (NC) |
11 | 1 contatto di chiusura (NO) / 1 contatto d'apertura (NC) |
-AN | con contatti output antivalenti |
(2) | |
senza | Morsetti a molla |
SK | collegamento a vite, collegabile |
- Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
- 2 safety contacts
- Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
- Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
Ordering data
Product type description |
PROTECT-PE-11-SK |
Article number (order number) |
101210945 |
EAN (European Article Number) |
4030661562124 |
eCl@ss number, version 12.0 |
27-37-18-19 |
eCl@ss number, version 11.0 |
27-37-18-19 |
eCl@ss number, version 9.0 |
27-37-18-19 |
ETIM number, version 7.0 |
EC001449 |
ETIM number, version 6.0 |
EC001449 |
Notice |
Discontinued product |
General data
Standards |
EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1 |
Climatic stress |
EN 60068-2-78 |
Housing material |
materiale sintetico, termoplastica rinforzata con fibra di vetro, ventilata |
Gross weight |
160 g |
General data - Features
Electronic Fuse |
Sì |
Wire breakage detection |
Sì |
Cross-circuit detection |
Sì |
Removable Terminals |
Sì |
Automatic reset function |
Sì |
Earth connection detection |
Sì |
Integral system diagnostics, general |
Sì |
Number of auxiliary contacts |
2 |
Number of LEDs |
6 |
Number of normally closed (NC) |
1 |
Number of normally open (NO) |
1 |
Number of signalling outputs |
7 |
Safety classification |
Vorschriften |
EN IEC 60947-5-1 EN IEC 61508 |
Stop-Category |
0 |
Safety classification - Relay outputs |
Performance Level, up to |
d |
Category |
3 |
Diagnostic Coverage (DC) Level |
60 % |
PFH value |
2,00 x 10⁻⁷ /h |
Safety Integrity Level (SIL), suitable for applications in |
2 |
Mission time |
20 Year(s) |
Common Cause Failure (CCF), minimum |
65 |
Mechanical data
Mechanical life, minimum |
10.000.000 Operations |
Mounting |
fissaggio rapido per guide DIN secondo DIN EN 60715 |
Mechanical data - Connection technique
Terminal designations |
IEC/EN 60947-1 |
Termination |
collegamento a vite, collegabile |
Cable section, minimum |
0,14 mm² |
Cable section, maximum |
1,5 mm² |
Tightening torque of Clips |
0,6 Nm |
Mechanical data - Dimensions
Width |
65,5 mm |
Height |
126 mm |
Depth |
61 mm |
Ambient conditions
Degree of protection of the enclosure |
IP20 |
Degree of protection of the installation space |
IP20 |
Degree of protection of clips or terminals |
IP20 |
Ambient temperature |
-25 ... +55 °C |
Storage and transport temperature |
-40 ... +85 °C |
Resistance to vibrations |
10...55 Hz, ampiezza 0,35 mm, ± 15 % |
Restistance to shock |
30 g / 11 ms |
Ambient conditions - Insulation values
Rated impulse withstand voltage Uimp |
4 kV |
Overvoltage category |
III |
Degree of pollution |
2 |
Electrical data
Operating voltage |
24 VDC -15 % / +20 % |
Ripple voltage |
10 % |
Rated operating voltage |
24 VDC |
Rated AC voltage for controls, 50 Hz, minimum |
21.1 |
Rated control voltage at AC 50 Hz, maximum |
26.4 |
Rated AC voltage for controls, 60 Hz, minimum |
21.1 |
Rated control voltage at AC 60 Hz, maximum |
26.4 |
Rated AC voltage for controls at DC minimum |
21,1 VDC |
Rated control voltage at DC, maximum |
28,8 VDC |
Electrical power consumption |
1,7 W |
Input resistance at Ue |
2.900 Ω |
Contact resistance, maximum |
0,1 Ω |
Note (Contact resistance) |
in perfette condizioni |
Drop-out delay in case of power failure, maximum |
60 ms |
Drop-out delay in case of "emergency stop", maximum |
10 ms |
Pull-in delay at automatic start, maximum, typically |
10 ms |
Electrical data - Safe relay outputs
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
2 A |
Switching capacity, minimum |
10 VDC |
Switching capacity, minimum |
10 mA |
Switching capacity, maximum |
24 VAC |
Switching capacity, maximum |
2 A |
Electrical data - Digital inputs
Input signal, HIGH Signal "1" |
19 - 28,8 VDC |
Input signal, LOW Signal "0" |
0 - 1 VDC |
Conduction resistance, maximum |
40 Ω |
Electrical data - Digital Output
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0,1 A |
Electrical data - Relay outputs (auxiliary contacts)
Switching capacity, maximum |
24 VDC |
Switching capacity, maximum |
0,1 A |
Electrical data - Electromagnetic compatibility (EMC)
EMC rating |
Direttiva EMC |
Status indication
Indicated operating states |
posizione dei relè K2 posizione dei relè K1 tensione d'esercizio interna Ui posizione dei relè K3 posizione dei relè K3 |
Other data
Note (applications) |
Sensore di sicurezza Dispositivo di protezione Pulsante di arresto d'emergenza Interruttori a fune d'emergenza Cortine ottiche di sicurezza |
Filtro lingua
Scheda Tecnica
Manuale d'istruzioni e dichiarazione UE di conformità
Download dell'ultima versione di Adobe Reader
Immagine del prodotto (foto singola per catalogo)
103008070 SRB-E-204PE
- Plug-in screw terminals with coding
- Input expander module
- 1 oder 2-channel control
- Monitoring of 4 sensors
- 2 Safety outputs
- 4 Signalling outputs
103009973 SRB-E-204ST
- Plug-in screw terminals with coding
- STOP 0 Function
- Monitoring of 4 sensors
- Start button / Auto-start
- 2 Safety outputs
- 4 Signalling outputs
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
I dettagli e i dati qui riportati sono stati attentamente verificati. Le immagini possono differire dagli originali. Altri dati tecnici possono essere trovati nei manuali. Salvo modifiche tecniche o errori.
Generato il 04/08/2025, 19:02