SRB302X3-24/115V

品番: 101183197

アーカイブ

品番: 101183197

Downloads

寸法 CADデータ

eプラン データ

CADENAS CADデータ

SISTEMA データ

Suitable for the signal processing of outputs with contact sensors
Suitable for signal processing of outputs connected to potentials (AOPDs), e.g. safety light grids/curtains
3 safety contacts, STOP 0
2 Signalling outputs

Certificates	cULus

Standards	EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1
Climatic stress	EN 60068-2-78
Housing material	グラスファイバー強化熱可塑性樹脂、換気口付き
Gross weight	520 g

Electronic Fuse	Yes
Wire breakage detection	Yes
Cross-circuit detection	Yes
Start input	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Reset edge detection	Yes
Earth connection detection	Yes
Integral system diagnostics, status	Yes
Number of auxiliary contacts	2
Number of LEDs	3
Number of normally closed (NC)	2
Number of safety contacts	3

Vorschriften	EN IEC 60947-5-1 EN IEC 61508
Stop-Category	0

Performance Level, up to	e
Category	4
Diagnostic Coverage (DC) Level	> 99 %
PFH value	2.00 x 10⁻⁸ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)
Common Cause Failure (CCF), minimum	65

Mechanical lifetime, minimum	10,000,000 Operations
Mounting	EN 60715に基づくDINレールにワンタッチ取り付け

Degree of protection of the enclosure	IP40
Degree of protection of the installation space	IP54
Degree of protection of clips or terminals	IP20
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-40 ... +85 °C
Resistance to vibrations	10 ~ 55 Hz、振幅 0.35 mm
Restistance to shock	30 g / 11 ms

Rated impulse withstand voltage U_imp	4 kV
Overvoltage category	III
Degree of pollution	2

Frequency range	50 Hz 60 Hz
Operating voltage	24 VDC -10 % / +20 %
Operating voltage	24 ... 230 VAC -15 % / +10 %
Ripple voltage	10 %
Type of voltage range	AC
Rated operating voltage	24 VDC
Rated operating voltage	24 ... 230 VAC
Rated AC voltage for controls, 50 Hz, minimum	20.4 VAC
Rated control voltage at AC 50 Hz, maximum	26.4 VAC
Rated AC voltage for controls at DC minimum	20.4 VDC
Rated control voltage at DC, maximum	28.8 VDC
Utilisation category AC-15	230 VAC
Utilisation category AC-15	6 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	6 A
Electrical power consumption	2.5 W
Electrical power consumption	5 VA
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	新しい状態で
Drop-out delay in case of power failure, typically	60 ms
Drop-out delay in case of "emergency stop", maximum	20 ms
Pull-in delay at RESET, typically	20 ms
Material of the contacts, electrical	AgSn0. セルフクリーニング, 強制ガイド式

Conduction resistance, maximum	40 Ω

EMC rating	EMC-Directive

Indicated operating states	Position relay K2 Position relay K1

Note (applications)	ガードシステム非常停止ボタンワイヤーロープ式非常停止スイッチセーフティライトカーテン

Note (General)	Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Note (Wiring diagram)	The wiring diagram is shown with guard doors closed and in de-energised condition. Relay outputs: Suitable for 2 channel control, for increase in capacity or number of contacts by means of contactors or relays with positive-guided contacts. The control recognises cross-short, cable break and earth leakages in the monitoring circuit. 2 channel control shown for a guard-door monitor with two contacts, of which at least one contact has positive break, with external reset button (R). (H2) = Feedback circuit