CSS 8-180-2P-E-L 10,0M

Varenummer: 101195510

CSS 8-180-2P-E-L 10,0M

Varenummer: 101195510

Downloads

TraceParts CAD Data

ePlan Data

CADENAS CAD Data

SISTEMA Data

Produkt-typebetegnelse:

CSS 8-180-(1)-(2)-(3)

(1)
2P	2 kortslutningssikre PNP-sikkerhetsutganger
2P+D	2 kortslutningssikre sikkerhetsutganger og diagnoseutgang

(2)
E	Individuell sensor eller endesensor i serie
Y	Seriekabling
M	Flerfunksjons tilkobling

(3)
L	kabel
LST	kabel med kontakt
ST	konnektorplugg

Ikke alle mulige maskiner med denne typenøkkelen kan leveres og/eller er teknisk omsettelige.

Pre-wired cable 4-pole
Thermoplastic enclosure
Electronic contact-free, coded system
Misaligned actuation possible
High repeat accuracy of the switching points
Max. length of the sensor chain 200 m
Early warning when operating near the limit of the sensor's hysteris range
Self-monitoring series-wiring of 16 sensors
2 short-circuit proof PNP safety outputs

Ordering data

Product type description	CSS 8-180-2P-E-L 10,0M
Article number (order number)	101195510
EAN (European Article Number)	4030661361246
eCl@ss number, version 12.0	27-27-46-01
eCl@ss number, version 11.0	27-27-24-03
eCl@ss number, version 9.0	27-27-24-03
ETIM number, version 7.0	EC001829
ETIM number, version 6.0	EC001829

Approvals - Standards

Certificates	TÜV cULus UKCA

General data

Standards	EN IEC 60947-5-3 EN IEC 61508
Working principle	induktiv
Housing construction form	sylinder, gjenget
Installation conditions (mechanical)	ikke i flukt
Sensor topology	Individuell sensor eller endesensor i serie
Housing material	Plast, glassfiber forsterket termoplast
Active area	Plast, glassfiber forsterket termoplast
Material of the nuts	Plast, glassfiber forsterket termoplast
Reaction time, maximum	30 ms
Duration of risk, maximum	30 ms
Gross weight	575 g

General data - Features

Short circuit detection	Ja
Cross-circuit detection	Ja
Safety functions	Ja
Integral system diagnostics, status	Ja
Number of fail-safe digital outputs	2
Number of series-wiring of sensors	16

Safety classification

Vorschriften	EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	2,50 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Tightening torque of nuts, maximum	3 Nm

Mechanical data - Switching distances

Switch distance, typical	8 mm
Assured switching distance "ON" S_ao	7 mm
Assured switching distance "OFF" S_ar	10 mm
Note (switching distance)	All switching distances in accordance EN IEC 60947-5-3
Hysteresis (Switching distance), maximum	0,7 mm
Repeat accuracy R	0,2 mm

Mechanical data - Connection technique

Length of cable	10 m
Termination	Kabel
Terminal connector, Output	4-polet
Wire cross-section	0,5 mm²
Wire cross-section	20 AWG

Mechanical data - Dimensions

ISO thread of the sensor	M18
width across flats	24 BK
Length of sensor	92 mm

Ambient conditions

Degree of protection	IP65 IP67
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-25 ... +85 °C
Resistance to vibrations	10 … 55 Hz, Amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0,8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Operating voltage	24 VDC -15 % / +10 %
No-load supply current I₀, typical	50 mA
Rated operating voltage	24 VDC
Operating current	1 000 mA
Switching frequency, approx.	3 Hz

Electrical data - Safety digital outputs

Rated operating current (safety outputs)	500 mA
Output current, (fail-safe output), maximum	0,5 A
Design of control elements	p-type
Voltage drop U_d, maximum	0,5 V
Leakage current I_r, maximum	0,5 mA
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0,5 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0,5 A

Status indication

Note (LED switching conditions display)	Multifarget lysdiode: grønn, rød, gul

Pin assignment

PIN 1	A1 Ue Brun
PIN 2	Y2 Sikkerhetsutgang 2: hvit
PIN 3	A2 GND Blå
PIN 4	Y1 Sikkerhetsutgang 1 Svart

Scope of delivery

Scope of delivery	Actuator must be ordered separately.
Scope of delivery of mounting material	2x Muttre M18 x 1

Accessory

Recommendation (actuator)	CST 180-1 CST 180-2
Recommended safety switchgear	PROTECT PSC1 SRB-E-301ST SRB-E-201LC

Note

Note (General)	Krav til evalueringen: Tokanals sikkerhetsinngang, egnet for p-koblende sensorer med lukkerfunksjon. Funksjonstest av sensorene med syklisk utkobling i maks. 0,25 ms må tolereres av evalueringen. Kortslutningsgjenkjenning er ikke nødvendig i evalueringen.

Produktbilde (enkelt katalogbilde)

ID: kcs18f01

| 146,4 kB | .jpg | 352.778 x 164.747 mm - 1000 x 467 px - 72 dpi

| 21,5 kB | .png | 74.083 x 34.572 mm - 210 x 98 px - 72 dpi

Dimensjonsriktig tegning grunnenhet

ID: 1css1g01

| 24,2 kB | .cdr |

| 4,9 kB | .png | 74.083 x 29.633 mm - 210 x 84 px - 72 dpi

| 54,5 kB | .jpg | 352.778 x 140.758 mm - 1000 x 399 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: kcss1k06

| 14,9 kB | .cdr |

| 92,4 kB | .jpg | 352.778 x 496.006 mm - 1000 x 1406 px - 72 dpi

| 3,0 kB | .png | 74.083 x 104.069 mm - 210 x 295 px - 72 dpi

Karakteristikk-kurve

ID: kcss1d03

| 3,0 kB | .png | 74.083 x 35.278 mm - 210 x 100 px - 72 dpi

| 83,4 kB | .jpg | 352.778 x 168.275 mm - 1000 x 477 px - 72 dpi

kablingseksempel

ID: kcs18f21

| 127,3 kB | .jpg | 352.778 x 178.858 mm - 1000 x 507 px - 72 dpi

Nøkkel

Mouting accessories

Accessories

Control-Modul

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

CSS 8-180

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant Directives:	Machinery Directive	2006/42/EC
	EMC-Directive	2014/30/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-3:2013
EN ISO 14119:2013
EN ISO 13849-1:2015
EN 61508 parts 1-7:2010

Notified body for Type Examination:

TÜV Rheinland Industrie Service GmbH
Am Grauen Stein, 51105 Köln
ID n°: 0035

EC-Type Examination Certificate:

01/205/5874.00/21

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, November 29, 2021

Authorised signature
Philip Schmersal
Managing Director

UK Conformity Declaration

Pdf

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

CSS 8-180

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant legislation:	Supply of Machinery (Safety) Regulations	2008
	Electromagnetic Compatibility Regulations	2016
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN 60947-5-3:2013
EN ISO 14119:2013
EN ISO 13849-1:2015
EN 61508 parts 1-7:2010

Approved body for Type Examination:

TÜV Rheinland UK Ltd.
1011 Stratford Road
Solihull, B90 4BN
ID: 2571

Type examination certificate:

01/205U/5874.00/23

UK-Importer /
Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, February 6, 2023

Authorised signature
Philip Schmersal
Managing Director

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.

Generert til 11.04.2025, 07:18

CSS 8-180-2P-E-L 10,0M