.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
BN 65-10Z/V-2040
BN 65-10Z/V-2040
Downloads
- Actuation from front
- with bias magnet
- Non-contact principle
- Long life
- Actuating surface and direction of actuation marked by switch symbol
- Construction form Ø 13 mm
- Thermoplastic enclosure
- Actuating distance up to 60 mm depending on actuating magnet and version
- with central mounting
- Available for actuation from front or side
Ordering data
| Product type description |
BN 65-10Z/V-2040 |
| Article number (order number) |
101192090 |
| EAN (European Article Number) |
4030661351537 |
| eCl@ss number, version 12.0 |
27-27-43-02 |
| eCl@ss number, version 11.0 |
27-27-01-05 |
| eCl@ss number, version 9.0 |
27-27-01-05 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
cULus |
General data
| Working principle |
Styrning av magnetlås |
| Housing construction form |
cylinder, jämn |
| Housing material |
Plast, glasfiberförstärkt termoplast |
| Gross weight |
30 g |
General data - Features
| Suitable for elevators |
Ja |
| bias magnet |
Ja |
| Number of normally open (NO) |
1 |
Mechanical data
| Active area |
frontsida |
| Actuating element |
Magnetspole |
| Mechanical lifetime, minimum |
1.000.000.000 Operations |
| Actuating speed, maximum |
18 m/s |
| Mounting |
centrerat med gängfläns |
| Tightening torque of nuts, maximum |
3 Nm |
Mechanical data - Switching distances
| Switching distance Sn |
5 mm … 55 mm BP 10S = 5 mm 2 x BP 10S = 10 mm BP 15S = 6 mm BP 34S = 20 mm BP 20S = 15 mm BP 31S = 15 mm BP 11S = 5 mm 2 x BP 11S = 15 mm BP 12S = 10 mm 2 x BP 12S = 25 mm BP 21S = 30 mm 2 x BP 21S = 20 ... 55 mm BP 22S = 25 mm 2 x BP 22S = 15 ... 55 mm |
| Note (Switching distance Sn) |
Aktiveringsavstånd upp till 55 mm beroende aktiveringsmagnet och utförande. Uppgifterna om kopplingsavstånd gäller vid aktivering av enskilt övervakade enheter utan ferromagnetisk inverkan. En förändring av avståndet, positiv eller negativ, är möjlig genom ferromagnetisk inverkan. Vid anordningen av flera aktiveringsmagneter måste den inverkan av varandra beaktas. |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
| Repeat accuracy R |
0,3 mm |
Mechanical data - Connection technique
| Termination |
RSF3 plug connector |
Mechanical data - Dimensions
| Diameter of sensor |
13 mm |
| width across flats |
22 BK |
| Length of sensor |
103 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +75 °C |
| Resistance to vibrations |
10 … 55 Hz, Amplitud 1 mm |
| Restistance to shock |
30 g, vid en sinusformad oscillering |
| Resistant to vibration |
30 g, vid en sinusformad oscillering |
Electrical data
| Switching voltage, maximum |
250 VAC |
| Switching current, maximum |
3 A |
| Switching capacity, maximum |
120 W |
| Switching capacity, maximum |
120 VA |
| Switching principle |
Reedkontakterr, beröringsfri princip |
| Bounce duration, minimum |
0,3 ms |
| Bounce duration, maximum |
3 ms |
| Switching frequency, maximum |
300 Hz |
| Maximale Schalthäufigkeit |
1.080.000 /h |
| Maximum switching time close (NO) |
1,5 ms |
| Maximum switching time open (NC) |
0,5 ms |
| Switching element |
Normally open contact (NO) |
| Minimum switching time close (NO) |
0,3 ms |
| Bounce duration, typically |
0,6 ms |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S 2x BP 12S BP 21 S 2x BP 21 S BP 22 S 2x BP 22 S BE 20 S |
| Recommendation (actuator, lift switchgear) |
BP 10 2 x BP 10 BP 15 BP 34 |
Note
| Note (General) |
Vid montering på järn måste ett omagnetiskt distans på minst 20 mm användas. |
Språk filter
Datablad
EU-försäkran om överensstämmelse
UL-certifikat
Info
Ladda ned senaste versionen av Adobe reader
Produktbild (singelfoto i katalog)
Måttritning (grundkomponent)
Kontaktdiagram
Kontakt sluten
Kontakt öppen
Inställningsområde
hållpunkt
Tvångsöppningsväg/-vinkelDiagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Karakteristisk kurva
101068881 ACC-IFL-MOCL-H15
- for BN 65
101057531 BP 10
- Unenclosed
- Colour coding of poles by lables
101057533 BP 11 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057532 BP 12 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101060163 BP 15
- thermoplastic enclosure
- N-pole marked green
- S-pole marked red
- Suitable for mounting on ferrous material with a distance of 18 mm
101057541 BP 20 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material with a distance of 20 mm
101057534 BP 21 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057432 BP 22 N(S)
- -metal housing
- S-pole marked red
- N-pole marked green
- Suitable for mounting on ferrous material
- Can be used as N or S magnet
101057521 BP 31 S
- thermoplastic enclosure
- S-pole marked red
- Suitable for mounting on ferrous material with a distance of 20 mm
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Alla data och värden har kontrollerats noga. Bilder kan avvika från originalet. Ytterligare tekniska data finns i manualen. Tekniska ändringar och fel förbehålles.
Genererat den 2025-09-10 01:11
Nyligen visad
