.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
BN 65-RZ/V 2,0M
BN 65-RZ/V 2,0M
Downloads
- With pre-wired cable
- Actuation from front
- with bias magnet
- Non-contact principle
- Long life
- Actuating surface and direction of actuation marked by switch symbol
- Construction form Ø 13 mm
- Thermoplastic enclosure
- Actuating distance up to 60 mm depending on actuating magnet and version
- with central mounting
- Available for actuation from front or side
Ordering data
| Product type description |
BN 65-RZ/V 2,0M |
| Article number (order number) |
101055839 |
| EAN (European Article Number) |
4030661009940 |
| eCl@ss number, version 12.0 |
27-27-43-02 |
| eCl@ss number, version 11.0 |
27-27-01-05 |
| eCl@ss number, version 9.0 |
27-27-01-05 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
cULus |
General data
| Working principle |
Manyetik tahrik |
| Housing construction form |
Silindir pürüzsüz |
| Housing material |
Plastik, fiber cam takviyeli termoplastik |
| Gross weight |
118 g |
General data - Features
| Latching |
Evet |
| Suitable for elevators |
Evet |
| bias magnet |
Evet |
| Cable sleeve |
Evet |
| Number of snap-in contacts |
1 |
Mechanical data
| Active area |
ön taraf |
| Actuating element |
Mıknatıs |
| Mechanical lifetime, minimum |
1.000.000.000 Operations |
| Actuating speed, maximum |
18 m/s |
| Mounting |
diş açılmış merkezi flanş |
| Tightening torque of nuts, maximum |
3 Nm |
Mechanical data - Switching distances
| Switching distance Sn |
3 mm … 45 mm 2 x BP 10 = 3 mm BP 34 = 15 mm BP 20 = 10 mm BP 31 = 10 mm BP 11 = 15 mm BP 12 = 20 mm BP 21 = 45 mm BP 22 N + BP 22 S = 35 mm |
| Note (Switching distance Sn) |
Actuating distance up to 45 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
| Repeat accuracy R |
0,3 mm |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Cable entry |
PG 9 screw connection |
| Termination |
Önceden döşenmiş kablo |
| Number of cable wires |
2 |
| Wire cross-section |
0,75 mm2 |
| Wire cross-section |
18 AWG |
| Material of the Cable mantle |
PVC |
| Cable type |
H03VV-F |
Mechanical data - Dimensions
| Diameter of sensor |
13 mm |
| width across flats |
22 BK |
| Length of sensor |
103 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +75 °C |
| Resistance to vibrations |
10 … 55 Hz, Genlik 1 mm |
| Restistance to shock |
15 g, sinüs dalgalı titreşim |
| Resistant to vibration |
15 g, sinüs dalgalı titreşim |
Electrical data
| Switching voltage, maximum |
230 VAC |
|
| Switching voltage, maximum |
230 VDC |
|
| Switching current, maximum |
1 A |
|
| Switching capacity, maximum |
60 W |
|
| Switching principle |
|
|
| Bounce duration, minimum |
0,3 ms |
|
| Bounce duration, maximum |
3 ms |
|
| Switching frequency, maximum |
300 Hz |
|
| Maximale Schalthäufigkeit |
720.000 /h |
|
| Maximum switching time close (NO) |
1,5 ms |
|
| Maximum switching time open (NC) |
0,5 ms |
|
| Minimum switching time close (NO) |
0,3 ms |
|
| Bounce duration, typically |
0,6 ms |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
2x BP 10 BP 34 BP 20 BP 31 BP 11 BP 12 BP 21 BP 22 S BP 22 N BE 20 |
| Recommendation (actuator, lift switchgear) |
BP 10 2 x BP 10 BP 15 BP 34 |
Note
| Note (General) |
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
Dil filtresi
Veri sayfası
AB Uygunluk Beyanı
UL Sertifikası
Bilgi
Adobe Reader’ın son sürümünü indirin
Ürün resmi (katalog özel fotoğraf)
Boyutsal resim temel bileşeni
Switch hareket şeması
Kontak kapalı
Kontak açık
Ayar aralığı
Sürgüleme noktası
Pozitif aralık yolu/açısıSwitch hareket şeması
Diyagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Karakteristik eğri
101068881 ACC-IFL-MOCL-H15
- for BN 65
101057531 BP 10
- Unenclosed
- Colour coding of poles by lables
101059923 BP 11 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057533 BP 11 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101059917 BP 12 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057532 BP 12 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057549 BP 20
- -metal housing
- S-pole marked red
- N-pole marked green
- Suitable for mounting on ferrous material with a distance of 20 mm
101057536 BP 21 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057534 BP 21 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057530 BP 31
- thermoplastic enclosure
- S-pole marked red
- N-pole marked green
- Suitable for mounting on ferrous material with a distance of 20 mm
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Veriler ve ayrıntılar dikkatli bir şekilde kontrol edilmişlerdir. Görüntüler orijinalden farklı olabilir. Daha fazla teknik veri kılavuzda bulunabilir. Teknik değişiklikler ve hatalar olabilir.
Udarbejdet d. 26.09.2025 22:57