.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
TV10S 335-03Z
TV10S 335-03Z
- 1 Cable entry M 20 x 1.5
- Metal enclosure
- Good resistance to oil and petroleum spirit
- Actuator heads can be repositioned by 4 x 90°
- 40,5 mm x 107 mm x 65,3 mm
- Actuator shaft can be turned 360°
Ordering data
| Product type description |
TV10S 335-03Z |
| Article number (order number) |
101179253 |
| EAN (European Article Number) |
4030661311715 |
| eCl@ss number, version 12.0 |
27-27-06-09 |
| eCl@ss number, version 11.0 |
27-27-06-09 |
| eCl@ss number, version 9.0 |
27-27-06-09 |
| ETIM number, version 7.0 |
EC002591 |
| ETIM number, version 6.0 |
EC002591 |
Approvals - Standards
| Certificates |
cULus CCC |
General data
| Housing material |
hafif alaşım kokil döküm |
| Housing coating material |
boyanmış |
| Gross weight |
253 g |
General data - Features
| Number of safety contacts |
3 |
| Safety classification |
| Vorschriften |
BG-GS-ET-15 EN ISO 13849-1 EN IEC 60947-5-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
20.000.000 Operations |
Mechanical data
| Actuating element |
Diğer |
| Mechanical life, minimum |
1.000.000 Operations |
| Positive break angle |
7 ° |
| Mounting hole for the shaft |
10 mm |
| Positive break torque |
0,6 Nm |
Mechanical data - Connection technique
| Termination |
Vida bağlantısı M20 x 1.5 |
| Cable section, minimum |
0,75 mm² |
| Cable section, maximum |
2,5 mm² |
| Note |
Kablo kısmı hakkındaki bütün göstergeler iletken yüksüklerini dahil ediyor. |
Mechanical data - connector side B
| Connector typ |
Female connector |
Mechanical data - Dimensions
| Length of sensor |
65,3 mm |
| Width of sensor |
40,5 mm |
| Height of sensor |
107 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
500 V |
| Rated impulse withstand voltage Uimp |
6 kV |
Electrical data
| Thermal test current |
10 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
4 A |
| Switching element |
Açıcı düzen (NC) |
| Switching principle |
Yavaş hareket |
| Maximale Schalthäufigkeit |
1.000 /h |
| Material of the contacts, electrical |
AgCdO, kendi kendini temizler, pozitif hareket |
Note
| Note (General) |
By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm) |
Dil filtresi
Veri sayfası
Çalışma Talimatları ile Uygunluk beyanı
UL Sertifikası
CCC sertifikasyonu
SISTEMA-VDMA kütüphanesi
Adobe Reader’ın son sürümünü indirin
Ürün resmi (katalog özel fotoğraf)
ID: ktv33f01
| 476,9 kB | .jpg | 193.322 x 304.8 mm - 548 x 864 px - 72 dpi
| 75,9 kB | .png | 74.083 x 116.769 mm - 210 x 331 px - 72 dpi
| 68,2 kB | .jpg | 78.317 x 123.472 mm - 222 x 350 px - 72 dpi
| 726,4 kB | .jpg | 352.778 x 555.978 mm - 1000 x 1576 px - 72 dpi
| 82,3 kB | .png | 74.083 x 116.769 mm - 210 x 331 px - 72 dpi
| 82,3 kB | .png | 74.083 x 116.769 mm - 210 x 331 px - 72 dpi
Boyutsal resim temel bileşeni
Switch hareket şeması
Kontak kapalı
Kontak açık
Ayar aralığı
Sürgüleme noktası
Pozitif aralık yolu/açısıDiyagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Örnek uygulama Resim Ürun
101147448 UNIVERSAL JOINT K2 CPL. UNIV.JOINT TV10S 335
- Factory-mounted pins
- Universal joint to compensate axial displacement
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | TV.S 335, TV.S 355 |
| Type: | See ordering code |
| Description of the component: | Hinge safety switch |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, October 6, 2021 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | TV.S 335, TV.S 355 |
| Type: | See ordering code |
| Description of the component: | Hinge safety switch |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, August 31, 2021 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Veriler ve ayrıntılar dikkatli bir şekilde kontrol edilmişlerdir. Görüntüler orijinalden farklı olabilir. Daha fazla teknik veri kılavuzda bulunabilir. Teknik değişiklikler ve hatalar olabilir.
Udarbejdet d. 2.04.2025 12:28