CSS 8-180-2P+D-M-L

项目编号: 101169558

CSS 8-180-2P+D-M-L

项目编号: 101169558

下载

追踪备件 CAD数据

计划数据

CADENAS CAD数据

SISTEMA 数据

量

产品描述:

CSS 8-180-(1)-(2)-(3)

(1)
2P	2 防短路PNP安全输出
2P+D	2 防短路PNP安全输出和诊断输出

(2)
E	单个传感器或串联传感器
Y	串联连接
M	多功能连接

(3)
L	电缆
LST	带连接器的电缆
ST	连接器插头

并非所有根据本订单代码可能的组件变体都可用和/或在技术上可行。

Pre-wired cable 7-pole
Comfortable diagnostics through sensor LED and electronic signalling output
Thermoplastic enclosure
Electronic contact-free, coded system
Misaligned actuation possible
High repeat accuracy of the switching points
Max. length of the sensor chain 200 m
Early warning when operating near the limit of the sensor's hysteris range
Self-monitoring series-wiring of 16 sensors
2 short-circuit proof PNP safety outputs

Ordering data

Product type description	CSS 8-180-2P+D-M-L
Article number (order number)	101169558
EAN (European Article Number)	4030661295992
eCl@ss number, version 12.0	27-27-46-01
eCl@ss number, version 11.0	27-27-24-03
eCl@ss number, version 9.0	27-27-24-03
ETIM number, version 7.0	EC001829
ETIM number, version 6.0	EC001829

Approvals - Standards

Certificates	TÜV cULus UKCA

General data

Standards	EN IEC 60947-5-3 EN IEC 61508
Working principle	感应
Housing construction form	圆柱、螺纹
Installation conditions (mechanical)	非冲洗
Sensor topology	串联传感器单个传感器或串联传感器
Housing material	玻璃纤维，加强型热塑塑料
Active area	玻璃纤维，加强型热塑塑料
Material of the nuts	玻璃纤维，加强型热塑塑料
Reaction time, maximum	30 ms
Duration of risk, maximum	30 ms
Gross weight	149 g

General data - Features

Short circuit detection	是
Cross-circuit detection	是
Safety functions	是
Integral system diagnostics, status	是
Number of semi-conductor outputs with signaling function	1
Number of fail-safe digital outputs	2
Number of series-wiring of sensors	16

Safety classification

Vorschriften	EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	2.50 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Tightening torque of nuts, maximum	3 Nm

Mechanical data - Switching distances

Switch distance, typical	8 mm
Assured switching distance "ON" S_ao	7 mm
Assured switching distance "OFF" S_ar	10 mm
Note (switching distance)	All switching distances in accordance EN IEC 60947-5-3
Hysteresis (Switching distance), maximum	0.7 mm
Repeat accuracy R	0.2 mm

Mechanical data - Connection technique

Length of cable	1 m
Termination	电缆
Wire cross-section	0.25 mm²
Wire cross-section	23 AWG

Mechanical data - Dimensions

ISO thread of the sensor	M18
width across flats	24 BK
Length of sensor	92 mm

Ambient conditions

Degree of protection	IP65 IP67
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-25 ... +85 °C
Resistance to vibrations	10 ... 55 Hz，振幅 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Operating voltage	24 VDC -15 % / +10 %
No-load supply current I₀, typical	50 mA
Rated operating voltage	24 VDC
Operating current	1,000 mA
Switching frequency, approx.	3 Hz
Utilisation category DC-12	24 VDC / 0.05 A

Electrical data - Safety digital outputs

Rated operating current (safety outputs)	500 mA
Output current, (fail-safe output), maximum	0.5 A
Design of control elements	P型
Voltage drop U_d, maximum	0.5 V
Leakage current I_r, maximum	0.5 mA
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.5 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.5 A

Electrical data - Diagnostic outputs

Rated operating voltage	24 VDC
Design of control elements	P型
Voltage drop U_d, maximum	4 V
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.05 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.05 A

Status indication

Note (LED switching conditions display)	多色发LED：绿色，红色，黄色

Pin assignment

PIN 1	A1 Ue 棕色
PIN 2	X2 安全输入 2: 白色
PIN 3	A2 GND 蓝
PIN 4	Y1 安全输出 1 黑色
PIN 5	信号输出: 灰色
PIN 6	X2 安全输入 2 紫色
PIN 7	Y2 安全输出 2 红色

Scope of delivery

Scope of delivery	操动件#必须单独订购.
Scope of delivery of mounting material	2x 螺母 M18 x 1

Accessory

Recommendation (actuator)	CST 180-1 CST 180-2
Recommended safety switchgear	PROTECT PSC1 SRB-E-301ST SRB-E-201LC

Note

Note (General)	评估要求：双通道安全输入，适用于P型传感器，带NO功能。安全监控模块必须允许传感器通过循环断开传感器输出来进行内部测试，断开时间最长.25 ms。无需通过评估进行短路识别。

产品图片（单独目录照片）

ID: kcs18f01

| 146,4 kB | .jpg | 352.778 x 164.747 mm - 1000 x 467 px - 72 dpi

| 21,5 kB | .png | 74.083 x 34.572 mm - 210 x 98 px - 72 dpi

尺寸图基本组件

ID: 1css1g01

| 24,2 kB | .cdr |

| 4,9 kB | .png | 74.083 x 29.633 mm - 210 x 84 px - 72 dpi

| 54,5 kB | .jpg | 352.778 x 140.758 mm - 1000 x 399 px - 72 dpi

图表

图表信息
ICO_LEG_ko-arrow4 电磁锁监控依据EN ISO 14119
ICO_LEG_ko-arrow1 肯定断开常闭触点
ICO_LEG_ko-arrow2 操动
ICO_LEG_ko-arrow3 未操动
ICO_LEG_ko-open 常开触点
ICO_LEG_ko-close 常闭触点

ID: kcss1k02

| 15,8 kB | .cdr |

| 77,8 kB | .jpg | 352.778 x 321.028 mm - 1000 x 910 px - 72 dpi

| 3,2 kB | .png | 74.083 x 67.381 mm - 210 x 191 px - 72 dpi

特征曲线

ID: kcss1d03

| 3,0 kB | .png | 74.083 x 35.278 mm - 210 x 100 px - 72 dpi

| 83,4 kB | .jpg | 352.778 x 168.275 mm - 1000 x 477 px - 72 dpi

全家福（集团照片）

ID: kcs18f19

| 176,6 kB | .jpg | 352.778 x 222.603 mm - 1000 x 631 px - 72 dpi

操动件

Mouting accessories

Accessories

Control-Modul

EU Conformity Declaration

PDF

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

CSS 8-180

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant Directives:	Machinery Directive	2006/42/EC
	EMC-Directive	2014/30/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-3:2013
EN ISO 14119:2013
EN ISO 13849-1:2015
EN 61508 parts 1-7:2010

Notified body for Type Examination:

TÜV Rheinland Industrie Service GmbH
Am Grauen Stein, 51105 Köln
ID n°: 0035

EC-Type Examination Certificate:

01/205/5874.00/21

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, November 29, 2021

Authorised signature
Philip Schmersal
Managing Director

UK Conformity Declaration

PDF

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

CSS 8-180

Type:

See ordering code

Description of the component:

Non-contact safety sensor

Relevant legislation:	Supply of Machinery (Safety) Regulations	2008
	Electromagnetic Compatibility Regulations	2016
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN 60947-5-3:2013
EN ISO 14119:2013
EN ISO 13849-1:2015
EN 61508 parts 1-7:2010

Approved body for Type Examination:

TÜV Rheinland UK Ltd.
1011 Stratford Road
Solihull, B90 4BN
ID: 2571

Type examination certificate:

01/205U/5874.00/23

UK-Importer /
Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, February 6, 2023

Authorised signature
Philip Schmersal
Managing Director

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

所涉及的详细信息和数据已经过仔细检查。图像可能与原始图像有所不同。您可在说明书中进一步获得技术数据。可能会有技术修改和错误。

生成日期 2025/8/13 下午10:02

CSS 8-180-2P+D-M-L