.png?id=0cbf9906562575d58d862dfd5bfa7947){kind=logo}
MS-AZM 200ST-T-1P2PWA-2568
Artikelnummer:
103005000
Archiv
MS-AZM 200ST-T-1P2PWA-2568
Artikelnummer:
103005000
| Product type description: AZM 200(1)(2)-T-(3)(4) |
| (1) | |
| without | Guard locking monitored > |
| B | Actuator monitored |
| (2) | |
| SK | Screw connection |
| CC | Cage clamp |
| ST1 | Connector M23 x 1, (8+1 pole) |
| ST2 | Connector M12 x 1, 8 pole |
| (3) | |
| 1P2P | 1 serial diagnostic output and 2 p-type safety outputs |
| 1P2PW | same as 1P2P, combined diagnostic signal: guard system closed and interlock locked |
| SD2P | serial diagnostic output and 2 p-type safety outputs |
| (4) | |
| without | Power to unlock |
| A | Power to lock |
Nicht alle nach diesem Typenschlüssel möglichen Geräte sind lieferbar und/oder technisch umsetzbar.
- Guard locking monitored
- Connector M23 12-pole,
- Idle assignable pushbutton and LED
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Max. length of the sensor chain 200 m
- Self-monitoring series-wiring
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Intelligent diagnosis
- Manual release
Ordering data
| NOTE_DELIV_CPTY |
Nicht mehr lieferbar! |
| PM_TYPE_NAME |
MS-AZM 200ST-T-1P2PWA-2568 |
| PM_ORDER_NUMBER |
103005000 |
| SAP_EAN |
4030661433431 |
| CODE_ECLASS_V12P0 |
27-27-26-03 |
| CODE_ECLASS_V11P0 |
27-27-26-03 |
| CODE_ECLASS_V09P0 |
27-27-26-03 |
| CODE_ETIM_V07P0 |
EC002593 |
| CODE_ETIM_V06P0 |
EC002593 |
General data
| NORM_STANDARD |
EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 61508 |
| CODE_GENERAL_INFO |
Universelle Codierung |
| CODE_CODING_LEVEL_ISO14119 |
gering |
| DESIGN_ACTIVE_PRINCIPLE |
induktiv |
| MAT_HOUSING |
Kunststoff, glasfaserverstärkter Thermoplast |
| TIME_RESPONSE_MAX |
60 |
| TIME_DURAT_OF_RISK_MAX |
120 |
| SAP_WEIGHT_GROSS |
734 |
General data - Features
| YN_PWR_TO_LOCK_PRINCIPLE |
Ja |
| YN_INTLK_MONITORING |
Ja |
| YN_AUX_RELEASE |
Ja |
| YN_SHORT_CIRCUIT_DETECT |
Ja |
| YN_CROSS_SHORT_DETECT |
Ja |
| YN_SERIE_WIRING |
Ja |
| YN_IDLE_ASSIGN_PUSHBUTTON |
Ja |
| YN_IDLE_ASSIGN_LED |
Ja |
| YN_FIT_FOR_SAFE_FUNC |
Ja |
| YN_INTEGR_DISPLAY_STATUS |
Ja |
| NUM_OF_SAFE_CONT |
2 |
| Safety classification |
| SAFE_NORM_STANDARD |
EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| SAFE_MISSION_TIME |
20 |
Safety classification - Interlocking function
| SAFE_PERFORM_LEVEL_INTLK |
e |
| SAFE_CAT_INTLK |
4 |
| SAFE_PFH_VALUE_INTLK |
4,00 x 10⁻⁹ |
| SAFE_PFD_VALUE_INTLK |
1,00 x 10⁻⁴ |
| SAFE_SIL_INTLK |
3 |
| SAFE_MISSION_TIME_INTLK |
20 |
Safety classification - Guard locking function
| SAFE_PERFORM_LEVEL_GRDLK |
d |
| SAFE_CAT_GRDLK |
2 |
| SAFE_PFH_VALUE_GRDLK |
2,50 x 10⁻⁹ |
| SAFE_PFD_VALUE_GRDLK |
2,20 x 10⁻⁴ |
| SAFE_SIL_GRDLK |
2 |
| SAFE_MISSION_TIME_GRDLK |
20 |
Mechanical data
| DESIGN_MECH_LIFETIME_SWITCH_MIN |
1.000.000 |
| FORCE_HOLDING_ISO14119 |
2.000 |
| NOTE_FORCE_HOLDING_ISO14119 |
1.000 N in Verbindung mit einem Betätiger AZ/AZM201-B30 für Innenanbau. |
| FORCE_HOLDING_MAX |
2.600 |
| NOTE_FORCE_HOLDING_MAX |
1.300 N in Verbindung mit einem Betätiger AZ/AZM201-B30 für Innenanbau. |
| FORCE_LATCH |
30 |
| MOTION_ACT_SPEED_MAX |
0,2 |
| TRQ_TIGHTEN_SCREW_HOUSING_COVER_MIN |
0,7 |
| TRQ_TIGHTEN_SCREW_HOUSING_COVER_MAX |
1 |
| NOTE_TRQ_TIGHTEN_SCREW_HOUSING_COVER |
Torx T10 |
Mechanical data - Connection technique
| REVIEW_ELEC_WIRING_GENERAL |
Steckverbinder M23, 12-polig |
Mechanical data - Dimensions
| DIM_LENGTH_SENSOR |
50 |
| DIM_WIDTH_SENSOR |
40 |
| DIM_HEIGHT_SENSOR |
220 |
Ambient conditions
| DESIGN_IP_CLASS_GENERAL |
IP67 |
| TEMP_AMB_GPV |
-25 ... +50 °C |
| TEMP_STORAGE_AND_TRANSPORT_GPV |
-25 ... +85 °C |
| APP_REL_HUMIDITY_MIN |
30 |
| APP_REL_HUMIDITY_MAX |
95 |
| NOTE_REL_HUMIDITY |
nicht kondensierend |
| REVIEW_RESIST_VIBRAT_EN60068_2_6 |
10 … 55 Hz, Amplitude 1 mm |
| REVIEW_RESTIST_TO_SHOCK |
30 g / 11 ms |
| DESIGN_PROTECT_CLASS_ROMAN |
II |
Ambient conditions - Insulation values
| VOLT_RATED_INSULAT |
32 VDC |
| VOLT_RATED_IMPULSE_WITHSTAND |
0,8 |
| DESIGN_OVERVOLT_CAT_VDE100_ROMAN |
III |
| DESIGN_DEG_OF_POLLUT_VDE100 |
3 |
Electrical data
| VOLT_OPERAT_GPV |
24 VDC -15 % / +10 % |
| CURR_NO_LOAD_CURR |
600 |
| VOLT_RATED_OPERAT_DC |
24 |
| CURR_RATED_OPERAT |
1.200 |
| TIME_TO_READINESS_MAX |
4.000 |
| TIME_SWITCH_FREQ_CA |
1 |
| ELEC_FUSE_OPERAT_CURR_MAX |
4 |
Electrical data - Magnet control
| ELEC_SWITCH_THRESHOLDS_MAGNET |
-3 V … 5 V (Low) 15 V … 30 V (High) |
| TIME_ON_DUTY_MAGNET |
100 |
Electrical data - Safety digital inputs
| ELEC_SWITCH_THRESHOLDS_SDIN |
−3 V … 5 V (Low) 15 V … 30 V (High) |
| CURR_CONSUMPT_AT_24V_SDIN |
5 |
Electrical data - Safety digital outputs
| CURR_RATED_OPERAT_SDOUT |
250 |
| VOLT_DROP_SDOUT_MAX |
4 |
| CURR_LEAKAGE_SDOUT_MAX |
0,5 |
| VOLT_UTILISAT_CAT_DC13_SDOUT |
24 |
| CURR_UTILISAT_CAT_DC13_SDOUT |
0,25 |
Electrical data - Diagnostic outputs
| CURR_RATED_OPERAT_DIAGN_OUT |
50 |
| VOLT_DROP_DIAGN_OUT_MAX |
4 |
| VOLT_UTILISAT_CAT_DC13_DIAGN_OUT |
24 |
| CURR_UTILISAT_CAT_DC13_DIAGN_OUT |
0,05 |
Status indication
| NOTE_LED_STATUS_INDICAT |
Betriebszustand: gelbe LED Fehler Funktionsstörung: rote LED Versorgungsspannung UB: grüne LED |
Pin assignment
| ELEC_CON_1_PIN_ASSIGN_1 |
A1 Versorgungsspannung Ub |
| ELEC_CON_1_PIN_ASSIGN_2 |
X1 Sicherheitseingang 1 |
| ELEC_CON_1_PIN_ASSIGN_3 |
A2 GND |
| ELEC_CON_1_PIN_ASSIGN_4 |
Y1 Sicherheitsausgang 1 |
| ELEC_CON_1_PIN_ASSIGN_5 |
OUT Diagnoseausgang |
| ELEC_CON_1_PIN_ASSIGN_6 |
X2 Sicherheitseingang 2 |
| ELEC_CON_1_PIN_ASSIGN_7 |
Y2 Sicherheitsausgang 2 |
| ELEC_CON_1_PIN_ASSIGN_8 |
IN Magnetansteuerung |
| ELEC_CON_1_PIN_ASSIGN_9 |
weiße LED |
| ELEC_CON_1_PIN_ASSIGN_10 |
Taster |
| ELEC_CON_1_PIN_ASSIGN_11 |
Taster |
| ELEC_CON_1_PIN_ASSIGN_12 |
Nicht belegt |
Scope of delivery
| SCOPE_OF_DELIV_GENERAL |
Der Betätiger ist nicht im Lieferumfang enthalten. Dreikantschlüssel für AZM 200 |
Accessory
| RECOMM_ACT |
AZ/AZM 200-B1 |
Note
| NOTE_GENERAL |
Die entsperrte Schutzeinrichtung kann, solange die Betätigereinheit in der Sicherheitszuhaltung eingeführt bleibt, wieder gesperrt werden. Die Sicherheitsausgänge werden erneut eingeschaltet, somit ist ein Öffnen der Schutzeinrichtung nicht erforderlich. |
Sprachfilter
Datenblatt
Betriebsanleitung und Konformitätserklärung
Info
Schaltungsbeispiel (elektr. Verdrahtung)
SISTEMA-VDMA Bibliothek/Library
Download der aktuellen Version von Adobe Reader
Produktbild (Katalogeinzelphoto )
Maßzeichnung Grundgerät
Kontaktbild
Überwachung der Zuhaltung gem. ISO 14119
zwangsöffnender Öffnerkontakt
betätigt
unbetätigt
Schließerkontakt
Öffnerkontakt
Montagebeispiel
Polbild
Schaltungsbeispiel
Zubehör
101188600 MOUNTING PLATE AZ/AZM200
- Mounting plate for easy and quick assembly
- Metal, powder-coated
101194218 MOUNTING PLATE MP AZ/AZM200-B30
- Mounting plate for easy and quick assembly
- Metal, powder-coated
- suitable for left and right hinged doors
101194224 MOUNTING PLATE MP AZ/AZM200-P1
- Mounting plate for easy and quick assembly
- Metal, powder-coated
- suitable for left and right hinged doors
101185694 MOUNTING PLATE MP AZ/AZM200-P20
- Mounting plate for easy and quick assembly
- Metal, powder-coated
- suitable for left and right hinged doors
101214126 MOUNTING PLATES KPL. MP BDF 200
- Mounting plate for easy and quick assembly
- Metal, powder-coated
- suitable for left and right hinged doors
103004966 RF-AZM200/201-T
- Subsequent functional expansion of the solenoid interlock AZM200 / AZM201
- Emergency exit retrofit kit
103003543 RF-AZM200/201-N
- Emergency release retrofit kit
- Subsequent functional expansion of the solenoid interlock AZM200 / AZM201
- optional lead sealing possible
101194438 Lockout tag SZ 200
- Lockout tag with 5 circular holes
- Suitable for mounting inside and outside of the hazardous area
- To prevent inadvertent closing, e.g. during maintenance
- For complex plant
- Prevents actuation of the switch
103001074 RF-AZ/AZM 200-B30-SZ
- enables the addition of an integrated lockout tag
- suitable for available B30 actuator systems
- Lockout tag with 3 circular holes
- For complex plant
- Prevents actuation of the switch
101196397 LOCKOUT TAG SZ 200-1
- Lockout tag with 6 circular holes
- Suitable for mounting inside and outside of the hazardous area
- To prevent inadvertent closing, e.g. during maintenance
- For complex plant
- Prevents actuation of the switch
Betätiger
101183465 AZ/AZM 200-B1-LT
- Actuators with return spring
- Actuator for sliding guards
- Tolerates up to max. 5 mm overtravel
101183466 AZ/AZM 200-B1-LTP0
- Actuators with return spring
- Actuator for sliding guards
- Tolerates up to max. 5 mm overtravel
101183469 AZ/AZM 200-B1-RT
- Actuators with return spring
- Actuator for sliding guards
- Tolerates up to max. 5 mm overtravel
101183470 AZ/AZM 200-B1-RTP0
- Actuators with return spring
- Actuator for sliding guards
- Tolerates up to max. 5 mm overtravel
101178681 AZ/AZM 200-B30-LTAG1
- Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101178668 AZ/AZM 200-B30-LTAG1P1
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101186150 AZ/AZM 200-B30-LTAG1P20
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101192102 AZ/AZM 200-B30-LTAG1P25
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101181137 AZ/AZM 200-B30-LTAG2
- Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101181141 AZ/AZM 200-B30-LTAG2P1
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101189020 AZ/AZM 200-B30-LTAG2P20
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101192106 AZ/AZM 200-B30-LTAG2P25
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101178680 AZ/AZM 200-B30-RTAG1
- Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101178738 AZ/AZM 200-B30-RTAG1P1
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101186144 AZ/AZM 200-B30-RTAG1P20
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101192103 AZ/AZM 200-B30-RTAG1P25
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101181139 AZ/AZM 200-B30-RTAG2
- Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101181143 AZ/AZM 200-B30-RTAG2P1
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101191659 AZ/AZM 200-B30-RTAG2P20
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
101192104 AZ/AZM 200-B30-RTAG2P25
- One-hand emergency exit,
even in de-energised condition - Actuator for hinged guards
- With door detection sensor T
- Easy and intuitive operation
- No risk of injury from protruding actuator
- No supplementary door handles required
- Does not protrude into the door opening
- Various handles available
- Greater mechanical stability
Alternativprodukt
103025498 AZM201Z-ST-T-1P2PW-A-2965-1
- Power to lock
- Thermoplastic enclosure
- Max. length of the sensor chain 200 m
- Self-monitoring series-wiring
- Coding in accordance to ISO 14119 by using RFID-Technology
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Suitable for hinged and sliding guards
- Intelligent diagnosis
- Manual release
- Protection class IP66, IP67
- High holding force 2000
- symmetrical construction form, assembly on 40mm profiles
- OSSD safety outputs
- Emergency exit / Emergency release suitable for retrofitting
施迈赛工业开关制造(上海)有限公司, 上海市青浦区漕盈路3336号,
Die genannten Daten und Angaben wurden sorgfältig geprüft. Abbildungen können vom Original abweichen. Weitere technische Daten finden Sie in der Betriebsanleitung. Technische Änderungen und Irrtümer vorbehalten.
Generiert am: 02.09.2025, 13:04
Zuletzt angesehen
