.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
EX-AZM 170-02ZK-R/P-3GD
EX-AZM 170-02ZK-R/P-3GD
| Tuotekuvaus: EX-AZM 170-(1)Z(2)K(3)-24VAC/DC-(4)-3G/D |
| (1) | |
| 11 | 1 sulkeutuva kosketin (NO) / 1 avautuva kosketin (NC) |
| 02 | 2 avautuvaa kosketinta (NC) |
| (2) | |
| ilman | Lukitusvoima 5 N |
| R | Lukitusvoima 30 N |
| (3) | |
| ilman | potentiaalivapaat koskettimet |
| A | jännitteellä lukittava |
| (4) | |
| ilman | Käsinvapautus |
| 1637 | kultapinnoitetut koskettimet |
- IDC method of termination
- Manual release
- Explosion protection for ATEX Zones 2 and 22
- 1 Cable entry M 20 x 1.5
- Interlock with protection against incorrect locking.
- High holding force
- 90 mm x 84 mm x 30 mm
Ordering data
| Product type description |
EX-AZM 170-02ZK-R/P-3GD |
| Article number (order number) |
103049512 |
| EAN (European Article Number) |
4030661624921 |
Approvals - Standards
| Certificates |
ATEX (Konformitätserklärung) |
Explosion protection
| Explosion protection: regulations |
EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
| Explosion protection zones |
2 22 |
| Explosion protection category |
3G 3D |
| Explosion protection designation |
D II 3G Ex nC IIB T5 Gc X D II 3D Ex tc IIIC T80°C Dc X |
| Manufacturer declaration |
ATEX Zone 2 and 22 |
General data
| Standards |
EN IEC 60947-5-1 |
| Coding level according to EN ISO 14119 |
alhainen |
| Working principle |
sähkömekaaninen |
| Housing material |
Muovi, lasikuituvahvistettu kestomuovi, itsestään sammuva |
General data - Features
| Power to unlock |
Kyllä |
| Manual release |
Kyllä |
| Number of safety contacts |
2 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 |
| Performance Level, up to |
c |
| Category |
1 |
| B10D Normally-closed contact (NC) |
2 000 000 Operations |
| Note |
Electrical life on request. |
| B10D Normally-open contact (NO) |
1 000 000 Operations |
| Mission time |
20 Year(s) |
| Safety classification - Fault exclusion |
| Performance Level, up to |
d |
| Category |
3 |
| Note |
for 2-channel use and with suitable logic unit. |
| Mission time |
20 Year(s) |
Safety classification - Guard locking function
| Performance Level, up to |
e |
| Note (Performance Level) |
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions. |
Mechanical data
| Mechanical life, minimum |
1 000 000 Operations |
| Impact energy, maximum |
7 J |
| Holding force |
1 000 N |
| Latching force |
5 N |
| Positive break travel |
11 mm |
| Positive break force, minimum |
17 N |
| Actuating speed, maximum |
1 m/s |
| Mounting |
Ruuvit |
| Type of the screw head |
Flat head screw |
| Tightening torque of the fastening screws for the housing cover, minimum |
0,4 Nm |
| Tightening torque of the fastening screws for the housing cover, maximum |
0,5 Nm |
| Tightening torque of the cable gland |
4,5 Nm |
Mechanical data - Connection technique
| Termination |
IDC-liitäntätapa |
| Cable cross-section of the cable glands, minimum |
6,5 mm |
| Cable cross-section of the cable glands, maximum |
12 mm |
| Cable section, minimum |
1 x 0,75 mm², taipuisa |
| Cable section, maximum |
1 x 1 mm², taipuisa |
| Allowed type of cable |
solid single-wire flexible |
Mechanical data - Dimensions
| Length of sensor |
30 mm |
| Width of sensor |
90 mm |
| Height of sensor |
84 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-15 ... +45 °C |
| Note (Relative humidity) |
ei kondensoitumista jäätymätön |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
2 A |
| Rated control voltage |
24 VAC |
| Rated control voltage |
24 VDC |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
2 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
Avautuva (NC) |
| Switching principle |
Suoratoiminen |
| Maximale Schalthäufigkeit |
1 000 /h |
| Material of the contacts, electrical |
Hopea |
Electrical data - Magnet control
| Magnet switch-on time |
100 % |
| Test pulse duration, maximum |
5 ms |
| Test pulse interval, minimum |
50 ms |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. Including Ex-certified screwed cable gland and screw plug |
Note
| Note (General) |
This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules |
| Note (Manual release) |
takana Käytä käsinvapautukseen lisätarvikkeena toimitettavaa M5 kolmiokanta-avainta |
Kielisuodatin
Tuotelehti
Käyttöohjeet ja vaatimuksenmukaisuusvakuutus
SISTEMA-VDMA. Kirjasto
Lattaa Adobe Readerin viimeisin versio
Tuotekuva( luettelokuva)
Perustuotteen mitat
Kosketinkaavio
Kosketin kiinni
Kosketin auki
Asetusalue
Avautumispiste
PakkoavauskulmaKytkentäkaavio
Seuranta suojuksia luokka ISO 14119
pakkoavautuva kosketin
vaikutettu
ei-vaikutettu
sulkeutuva kosketin
avautuva kosketin
Kokoonpanoesimerkki
ID: kazm1m06
131123391 ACTUATOR AZM 170-B6
- Particularly suitable for hinged guards
- The direction of actuation can be selected by applicable insertion of the insert
131122895 BETÄTIGER AZM 17/170-B5
- Particularly suitable for sliding doors
- Particularly suitable for sliding doors
101139789 ACTUATOR AZ 17/170-B15
- Particularly suitable for sliding doors
- Particularly suitable for sliding doors
101139788 ACTUATOR AZ 17/170-B11
- Particularly suitable for sliding doors
101137406 ACTUATOR AZ 17/170-B1-2245
- Straight actuator with rubber mounting
- Damps vibration on guard device
- Particularly suitable for sliding doors
131122893 ACTUATOR AZ 17/170-B1
- Particularly suitable for sliding doors
- Straight actuator
- Particularly suitable for sliding doors
101175201 ACTUATOR AZM 170-B25-L-G1
- Door hinge on left-hand side (View point towards the hazardous area)
- with Star grip
- Ergonomic operation
- No supplementary door-handle required
- No protruding actuator
- Simple mounting
- Several door-handles available
- Possibility to mount the own handles using a default square screw (8 mm)
101175227 ACTUATOR AZM 170-B25-L-G2
- Door hinge on left-hand side (View point towards the hazardous area)
- with T-grip
- Ergonomic operation
- No supplementary door-handle required
- No protruding actuator
- Simple mounting
- Several door-handles available
- Possibility to mount the own handles using a default square screw (8 mm)
101175200 ACTUATOR AZM 170-B25-R-G1
- Door hinge on right-hand side (View point towards the hazardous area)
- with Star grip
- Ergonomic operation
- No supplementary door-handle required
- No protruding actuator
- Simple mounting
- Several door-handles available
- Possibility to mount the own handles using a default square screw (8 mm)
101175226 ACTUATOR AZM 170-B25-R-G2
- Door hinge on right-hand side (View point towards the hazardous area)
- with T-grip
- Ergonomic operation
- No supplementary door-handle required
- No protruding actuator
- Simple mounting
- Several door-handles available
- Possibility to mount the own handles using a default square screw (8 mm)
101100887 TK-M5
- For manual release using M5 triangular key, available as accessory
- For maintenance, installation, etc.
101208493 AZM 170-B WITH CENTERING GUIDE
- for AZ 17 and AZM 170
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | EX-AZM170 EX-AZM170 I |
| Type: | See ordering code |
| Marking: | D II 3G Ex nC IIB T5 Gc D II 3D Ex tc IIIC T80°C Dc |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| Explosion Protection Directive (ATEX) | 2014/34/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 + AC:2020 EN ISO 14119:2014 EN IEC 60079-0:2018 + AC:2020 EN IEC 60079-15:2019 EN 60079-31:2014 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, April 23, 2025 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Tiedot ja arvot on tarkastettu huolellisesti. Kuvat voivat poiketa alkuperäisestä. Tarkemmat tekniset tiedot löytyvät manuaalista. Pidätämme oikeuden teknisiin muutoksiin ja virheisiin.
Luotu: 29.4.2025 12.00
Viimeksi katsottu
