.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
BNS 260 STG-AS-R
| 製品タイプの説明: BNS 260 (1)-AS-(2) |
| (1) | |
| なし | 接続ケーブル (2 m) |
| STG | M12ストレートコネクター付き接続ケーブル, 4芯 |
| STW | 配線済M12アングルコネクター付ケーブル, 4芯 |
| (2) | |
| L | 左開き用ドアヒンジ |
| R | 右開き用ドアヒンジ |
- 2 m Pre-wired cable with connector M12, straight, 4-pole
- Safety sensor
- Thermoplastic enclosure
- no mechanical wear
- 36 mm x 26 mm x 13 mm
- Integrated AS-Interface
- Concealed mounting possible
- Long life
- Insensitive to transverse misalignment
- Insensitive to soiling
- AS-Interface LED and status display
Ordering data
| Product type description |
BNS 260 STG-AS-R |
| Article number (order number) |
101186155 |
| EAN (European Article Number) |
4030661333656 |
| eCl@ss number, version 12.0 |
27-27-44-01 |
| eCl@ss number, version 11.0 |
27-27-24-02 |
| eCl@ss number, version 9.0 |
27-27-24-02 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
cULus ASi-SaW |
General data
| Standards |
EN IEC 62026-2 EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Working principle |
磁気装置 |
| Installation conditions (mechanical) |
適切な横幅の |
| Housing material |
グラスファイバー強化熱可塑性樹脂 |
| Reaction time, maximum |
100 ms |
| Gross weight |
100 g |
General data - Features
| Coding |
Yes |
| Integral system diagnostics, status |
Yes |
| Number of poles |
4 |
| Safety classification |
| Standards |
EN IEC 61508 |
| Performance Level, up to |
e |
| Category |
4 |
| PFH value |
6.21 x 10⁻⁹ /h |
| Note (PFH-value) |
up to max. 500,000 switching cycles/year |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Mission time |
20 Year(s) |
Mechanical data
| Actuating element |
ソレノイド |
| Door hinge |
Right |
| Direction of motion |
Head-on to the active surface |
Mechanical data - Switching distances
| Note (Switching distance Sn) |
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Assured switching distance "ON" Sao |
5 mm |
| Assured switching distance "OFF" Sar |
15 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-3 |
| Note (Repeat accuracy R) |
Repeat accuracy R ≤ 0,1 x Sao |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
M12ストレートコネクター, 4芯付き接続ケーブル |
| Number of cable wires |
2 |
| Wire cross-section |
0.23 mm2 |
| Wire cross-section |
23 AWG |
| Material of the Cable mantle |
PVC |
| Cable type |
LSYY |
Mechanical data - Dimensions
| Length of sensor |
13 mm |
| Height of sensor |
26 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +60 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 ~ 55 Hz, 振幅 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
32 VDC |
| Rated impulse withstand voltage Uimp |
0.8 kV |
| Overvoltage category |
III |
| Degree of pollution |
3 |
Electrical data - AS Interface
| Rated operating voltage |
18 ... 31.6 VDC (Protection against polarity reversal) |
| AS-i Current consumption, maximum |
50 mA |
Electrical data - AS-Interface specification
| AS-i Specification |
Safety-Slave |
| AS-i Version |
V 2.1 |
| AS-i Profile |
S-0.B.F.E |
| AS-i, IO-Code |
0x0 |
| AS-i, ID-Code |
0xB |
| AS-i, ID-Code1 |
0xF |
| AS-i, ID-Code2 |
0xE |
| AS-i Input, Channel 1 |
Data bits DI 0 / DI 1 = dynamic code transmission |
| AS-i Input, Channel 2 |
Data bits DI 2 / DI 3 = dynamic code transmission |
| AS-i Outputs, DO 0 … DO 3 |
No Function |
| AS-i Parameter bits, P0 ... P3 |
No function |
| Note (AS-i Parameter bits) |
Set the parameter outputs to "1111" (0xF) FID: periphery error |
| AS-i Input module address |
0 |
| Note (AS-i Input module address) |
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
Status indication
| Note (LED switching conditions display) |
(1) LED green: Supply voltage (2) red LED: AS-i communication error / Slave address = 0 |
Pin assignment
| PIN 1 |
AS-i + |
| PIN 2 |
n.c. |
| PIN 3 |
AS-Interface - |
| PIN 4 |
n.c. |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BPS 260-1 BPS 260-2 |
言語フィルター
データシート
Operating instructions and Declaration of conformity
AS interface safety at work certificate
SISTEMA-VDMA library
Adobe Readerの最新版をダウンロードしてください
Product picture (catalogue individual photo)
ID: kbns2f30
| 409,3 kB | .jpg | 352.778 x 529.167 mm - 1000 x 1500 px - 72 dpi
| 55,6 kB | .png | 73.731 x 110.772 mm - 209 x 314 px - 72 dpi
| 33,5 kB | .jpg | 82.197 x 123.472 mm - 233 x 350 px - 72 dpi
| 335,7 kB | .jpg | 352.778 x 529.167 mm - 1000 x 1500 px - 72 dpi
| 49,7 kB | .png | 73.731 x 110.772 mm - 209 x 314 px - 72 dpi
| 49,7 kB | .png | 73.731 x 110.772 mm - 209 x 314 px - 72 dpi
Dimensional drawing basic component
Characteristic curve
Characteristic curve
Contact arrangement
Clipart
101184643 SPACER BNS 260
- to mount the magnetic safety sensor and actuator on ferromagnetic material
101184396 BPS 260-2
- Actuator 90 ° attached to the sensor
101184395 BPS 260-1
- Actuator and sensor on a mounting level
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | BNS 260 AS |
| Type: | See ordering code |
| Description of the component: | Coded, magnetic safety sensor with integrated AS-i Safety at Work |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 ISO 14119:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, May 4, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | BNS 260 AS |
| Type: | See ordering code |
| Description of the component: | Coded, magnetic safety sensor with integrated AS-i Safety at Work |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-3:2013 ISO 14119:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, May 4, 2023 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
データと詳細は完全にチェックされました。画像は元の画像と異なる場合があります。技術的なデータはマニュアルで見られます。技術的に変更されたり、エラーの可能性があります。
Generated on 2025/09/24 1:29
最近見た製品
