EX-BN 20-01Z-3G/D

Varenummer: 101189767

EX-BN 20-01Z-3G/D

Varenummer: 101189767

Downloads

TraceParts CAD Data

ePlan Data

CADENAS CAD Data

SISTEMA Data

Mengde

Produkt-typebetegnelse:

EX-BN 20-(1)Z-3G/D

(1)
01	1 NC-kontakter
02	2 NC-kontakter
10	1 NO-kontakter
20	2 NO-kontakter
11	1 NC-kontakter / 1 NO-kontakt
R	1 bistabil kontakt
2R	2 bistabil kontakt
11R	2 bistabile NC-kontakter / NO-kontakter

Ikke alle mulige maskiner med denne typenøkkelen kan leveres og/eller er teknisk omsettelige.

1 Reed contakts
Explosion protection for ATEX Zones 2 and 22
Aluminium enlosure
104 mm x 52 mm x 47 mm
Actuating distance up to 50 mm depending on actuating magnet and version
Non-contact principle
Screw connection

Ordering data

Product type description	EX-BN 20-01Z-3G/D
Article number (order number)	101189767
EAN (European Article Number)	4030661347486
eCl@ss number, version 12.0	27-27-43-02
eCl@ss number, version 11.0	27-27-01-05
eCl@ss number, version 9.0	27-27-01-05
ETIM number, version 7.0	EC002544
ETIM number, version 6.0	EC002544

Approvals - Standards

Certificates	ATEX (Konformitätserklärung)

Explosion protection

Explosion protection: regulations	EN IEC 60079-0 EN IEC 60079-15 EN 60079-31
Explosion protection zones	2 22
Explosion protection category	3G 3D
Explosion protection designation	D II 3G Ex nC IIC T5 Gc X D II 3D Ex tc IIIC T90°C Dc X
Manufacturer declaration	ATEX Zone 2 and 22

General data

Working principle	Magnetisk drev
Housing construction form	rektangulær
Housing material	Formstøpt lett legering, lakkert
Active area	Metallfilm
Gross weight	315 g

General data - Features

bias magnet	Ja
Number of normally closed (NC)	1

Mechanical data

Actuating panels	på side
Active area	på side
Actuating element	Magnet
Mechanical life, minimum	1 000 000 000 Operations
Impact energy, maximum	4 J
Actuating speed, maximum	18 m/s

Mechanical data - Switching distances

Switching distance S_n	12 mm ... 45 mm
Note (Switching distance Sn)	Aktueringsavstand opp til 45 mm avhengig av aktuerende magnet og versjon
Note (switching distance)	All switching distances in accordance EN IEC 60947-5-2
Repeat accuracy R	0,3 mm

Mechanical data - Connection technique

Termination	Skrueforbindelse M20 x 1.5
Cable cross-section of the cable glands, minimum	6 mm
Cable cross-section of the cable glands, maximum	10 mm

Mechanical data - Dimensions

Length of sensor	47 mm
Width of sensor	104 mm
Height of sensor	52 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-15 ... +70 °C
Storage and transport temperature	-25 ... +70 °C
Resistance to vibrations	10 … 55 Hz, Amplitude 1 mm
Restistance to shock	30 g / 11 ms
Resistant to vibration	50 g, på sinusbølge-oscillasjon

Electrical data

Switching voltage, maximum	250 VAC
Switching voltage, maximum	250 VDC
Switching current, maximum	3 A
Switching capacity, maximum	120 W
Switching capacity, maximum	120 VA
Switching element	Åpner (NC)
Bounce duration, minimum	0,3 ms
Bounce duration, maximum	0,6 ms
Switching frequency, maximum	300 Hz

Electrical data - Digital Output

Design of control elements	Reedkontakter

Scope of delivery

Scope of delivery	Actuator must be ordered separately. Eks-sertifisert skrudd kabelgjennomføring

Accessory

Recommendation (actuator)	2x BP 10 2x BP 15/2 BP 20 BP 31 BP 11 BP 12 BP 21 BE 20

Note

Note (General)	Åpne- og lukkefunksjonene avhenger av retningen til aktueringen, de aktuerende magnetene og polariteten til de aktuerende magnetene. Når bryterne og aktuatorene kommer sammen, må fargene sammenfalle: Rød (S) til rød (S) og grønn (N) til grønn (N).

Produktbilde (enkelt katalogbilde)

ID: kexbnf01

| 378,2 kB | .jpg | 352.778 x 181.328 mm - 1000 x 514 px - 72 dpi

| 46,2 kB | .png | 74.083 x 38.1 mm - 210 x 108 px - 72 dpi

Dimensjonsriktig tegning grunnenhet

ID: 1bn20g03

| 33,4 kB | .cdr |

| 10,8 kB | .png | 74.083 x 51.858 mm - 210 x 147 px - 72 dpi

| 127,3 kB | .jpg | 352.778 x 247.297 mm - 1000 x 701 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: 1bn20k01

| 66,1 kB | .cdr |

| 187,4 kB | .jpg | 352.778 x 349.25 mm - 1000 x 990 px - 72 dpi

| 18,5 kB | .png | 74.083 x 73.378 mm - 210 x 208 px - 72 dpi

Karakteristikk-kurve

ID: kbn32d01

| 110,5 kB | .jpg | 352.425 x 371.828 mm - 999 x 1054 px - 72 dpi

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

EX-BN 20

Type:

See ordering code

Marking:

D II 3G Ex nC IIC T5 Gc X
D II 3D Ex tc IIIC T90°C Dc X

Description of the component:

Magnetic reed switches

Relevant Directives:	Explosion Protection Directive (ATEX)	2014/34/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN IEC 60079-0:2018
EN IEC 60079-15:2019
EN 60079-31:2014

Notified body, which approved the full quality assurance system, referred to Appendix IV, 2014/34/EU:

TÜV Rheinland Industrie Service GmbH
Am Grauen Stein, 51105 Köln
ID n°: 0035

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, September 21, 2023

Authorised signature
Philip Schmersal
Managing Director

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.

Generert til 25.04.2025, 22:35

EX-BN 20-01Z-3G/D