CSS 8-16-2P-E-L
- Pre-wired cable 4-pole
- NOTICE: Not available! (Replacement: RSS16)
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Misaligned actuation possible
- 55 mm x 93 mm x 39.5 mm
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- Early warning when operating near the limit of the sensor's hysteris range
- Self-monitoring series-wiring of 16 sensors
- 2 short-circuit proof PNP safety outputs
Ordering data
Note (Delivery capacity) |
不支持! |
Product type description |
CSS 8-16-2P-E-L |
Article number (order number) |
101210574 |
EAN (European Article Number) |
4030661388922 |
eCl@ss number, version 12.0 |
27-27-46-01 |
eCl@ss number, version 11.0 |
27-27-24-03 |
eCl@ss number, version 9.0 |
27-27-24-03 |
ETIM number, version 7.0 |
EC001829 |
ETIM number, version 6.0 |
EC001829 |
Approvals - Standards
Certificates |
cULus |
General data
Standards |
EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
Coding level according to EN ISO 14119 |
低 |
Working principle |
感应 |
Housing construction form |
块体 |
Installation conditions (mechanical) |
非冲洗 |
Sensor topology |
单个传感器或串联传感器 |
Housing material |
塑料,玻璃纤维加固热塑塑料,自熄灭 |
Active area |
玻璃纤维,加强型热塑塑料 |
Reaction time, maximum |
30 ms |
Duration of risk, maximum |
30 ms |
Gross weight |
315 g |
General data - Features
Short circuit detection |
是 |
Cross-circuit detection |
是 |
Safety functions |
是 |
Integral system diagnostics, status |
是 |
Number of fail-safe digital outputs |
2 |
Number of series-wiring of sensors |
16 |
Safety classification |
Vorschriften |
EN IEC 60947-5-3 EN IEC 61508 |
Performance Level, up to |
e |
Category |
4 |
PFH value |
2.50 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Mechanical data - Switching distances
Switch distance, typical |
8 mm |
Assured switching distance "ON" Sao |
6 mm |
Assured switching distance "OFF" Sar |
11 mm |
Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-3 |
Hysteresis (Switching distance), maximum |
1 mm |
Repeat accuracy R |
0.5 mm |
Mechanical data - Connection technique
Note (length of the sensor chain) |
根据输出电流,电缆长度和电缆截面会改变电压降 |
Length of cable |
2 m |
Termination |
电缆 |
Terminal connector, Output |
4芯 |
Wire cross-section |
0.5 mm2 |
Wire cross-section |
20 AWG |
Mechanical data - Dimensions
Length of sensor |
39.5 mm |
Width of sensor |
55 mm |
Height of sensor |
93 mm |
Ambient conditions
Degree of protection |
IP65 IP67 |
Ambient temperature |
-25 ... +55 °C |
Storage and transport temperature |
-25 ... +85 °C |
Resistance to vibrations |
10 ... 55 Hz,振幅 1 mm |
Restistance to shock |
30 g / 11 ms |
Protection class |
II |
Ambient conditions - Insulation values
Rated insulation voltage Ui |
32 VDC |
Rated impulse withstand voltage Uimp |
0.8 kV |
Overvoltage category |
III |
Degree of pollution |
3 |
Electrical data
Operating voltage |
24 VDC -15 % / +10 % |
No-load supply current I0, typical |
50 mA |
Rated operating voltage |
24 VDC |
Operating current |
1,100 mA |
Switching frequency, approx. |
3 Hz |
Electrical data - Safety digital outputs
Output current, (fail-safe output), maximum |
0.5 A |
Design of control elements |
P型 |
Voltage drop Ud, maximum |
0.5 V |
Leakage current Ir, maximum |
0.5 mA |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0.5 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0.5 A |
Electrical data - Diagnostic outputs
Design of control elements |
P型 |
Voltage drop Ud, maximum |
4 V |
Electrical data - Electromagnetic compatibility (EMC)
Interfering radiation |
IEC 61000-6-4 |
EMC rating |
IEC 61000-6-2 |
Status indication
Note (LED switching conditions display) |
多色发LED:绿色,红色,黄色 |
Pin assignment
PIN 1 |
A1 Ue 棕色 |
PIN 2 |
Y2 安全输出 2: 白色 |
PIN 3 |
A2 GND 蓝 |
PIN 4 |
Y1 安全输出 1 黑色 |
Scope of delivery
Scope of delivery |
操动件#必须单独订购. |
Accessory
Recommendation (actuator) |
CST 16-1 |
Recommended safety switchgear |
PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
Note
Note (General) |
评估要求:双通道安全输入,适用于P型传感器,带NO功能。安全监控模块必须允许传感器通过循环断开传感器输出来进行内部测试,断开时间最长.25 ms。无需通过评估进行短路识别。 |
产品图片(单独目录照片)
产品图片(单独目录照片)
尺寸图 基本组件
特征曲线
103004370 RSS16-D-ST8H
- Universal coding with RFID technology
- 1 x connector plug M12, 8-pole
- Series-wiring unlimited
- without latching
- Thermoplastic enclosure
- RFID-technology for needs-based protection against tampering
- 3 different directions of actuation
- Door stop with magnetic latching
- Connection terminal or plug connection
- Suitable for series-wiring
- Repeated individual coding with RFID technology
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/4/21 上午5:15