ZQ 700 ST-AS
- AS-Interface M12 connector, bottom
- Thermoplastic enclosure
- One tension force for cable lengths up to 10 m
- Release push button
- Position indicator
- Twisting of towing eye not possible
- wire pull and breakage detection
- Double-insulated
- Integrated AS-Interface
- Suitable for AS-i Power24
Ordering data
Note (Delivery capacity) |
不支持! |
Product type description |
ZQ 700 ST-AS |
Article number (order number) |
101215046 |
EAN (European Article Number) |
4030661404455 |
eCl@ss number, version 12.0 |
27-37-12-01 |
eCl@ss number, version 11.0 |
27-37-12-01 |
eCl@ss number, version 9.0 |
27-37-12-01 |
ETIM number, version 7.0 |
EC002033 |
ETIM number, version 6.0 |
EC002033 |
Approvals - Standards
Certificates |
cULus ASi-SaW |
General data
Standards |
EN 50295 EN ISO 13849-1 EN ISO 13850 EN IEC 60947-5-1 EN IEC 61508 |
Housing material |
塑料,玻璃纤维加固热塑塑料,自熄灭 |
Material of the housing cover |
塑料,玻璃纤维加固热塑塑料,自熄灭 |
Length of the wire, maximum |
10 m |
Reaction time, maximum |
100 ms |
Gross weight |
230 g |
Safety classification |
Vorschriften |
EN IEC 61508 |
Performance Level, up to |
e |
Category |
4 |
PFH value |
1.40 x 10⁻⁸ /h |
Note (PFH-value) |
高达最多5,000次开关循环/年 |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Mechanical data
Mechanical life, minimum |
100,000 Operations |
Actuating force, maximum |
200 N |
Actuating travel |
400 mm |
Mechanical data - Connection technique
Termination |
连接器插头M12,4芯,(A编码) |
Mechanical data - Dimensions
Length of sensor |
51 mm |
Width of sensor |
40.5 mm |
Height of sensor |
182.5 mm |
Ambient conditions
Degree of protection |
IP67 |
Ambient temperature |
-25 ... +60 °C |
Storage and transport temperature |
-25 ... +85 °C |
Relative humidity, minimum |
30 % |
Relative humidity, maximum |
95 % |
Note (Relative humidity) |
无冷凝 不结冰 |
Resistance to vibrations |
10 ... 150 Hz, 振幅 .35 mm / 5 g |
Restistance to shock |
15 g / 11 ms |
Protection class |
II |
Ambient conditions - Insulation values
Rated insulation voltage Ui |
32 V |
Rated impulse withstand voltage Uimp |
0.8 kV |
Overvoltage category |
III |
Degree of pollution |
3 |
Electrical data
Current consumption |
50 mA |
Switching principle |
速动型 |
Maximale Schalthäufigkeit |
3,600 /h |
Electrical data - AS Interface
Rated operating voltage |
18 ... 31.6 VDC (Protection against polarity reversal) |
Electrical data - AS-Interface specification
AS-i Version |
V 3.0 |
AS-i Profile |
S-0.B.F.F |
AS-i, IO-Code |
0x0 |
AS-i, ID-Code |
0xB |
AS-i, ID-Code1 |
0xF |
AS-i, ID-Code2 |
0xF |
AS-i Input, Channel 1 |
数据位 DI 0/DI 1 = 动态代码传输 |
AS-i Input, Channel 2 |
数据位 DI 2/DI 3 = 动态代码传输数据位 DI 2/DI 3 = 动态代码传输 |
AS-i Outputs, DO 0 … DO 3 |
无功能 |
AS-i Parameter bits, P0 |
通道 2 已切换 |
AS-i Parameter bits, P1 |
无功能 |
AS-i Parameter bits, P2 |
无功能 |
AS-i Parameter bits, P3 |
无功能 |
Note (AS-i Parameter bits) |
将参数输出设置为“1111”(0xF) FID:外围误差 |
AS-i Input module address |
0 |
Note (AS-i Input module address) |
预设地址为0,可通过AS-Interface总线控制或手持编程设备进行更改 |
Pin assignment
PIN 1 |
AS-Interface + |
PIN 2 |
n.c. |
PIN 3 |
AS-Interface - |
PIN 4 |
n.c. |
Note
Note (General) |
与环境温度范围相关的紧急停止拉线开关的推荐电缆长度。 嵌环在受力时会略微变形,安装时需多次拉紧拉绳。此后,拉绳必须使用吊环螺钉或张紧器重新拉直 必须通过M12连接器或扁平电缆连接进行访问。 在2mm至5mm处,需要中间线支架,见附件 |
语言条件
数据表
操作指南及符合性声明
UL证书
AS-interface 安全网络证书
SISTEMA-VDMA 数据库
下载最新版本的Adobe Reader
产品图片(单独目录照片)
尺寸图 基本组件
尺寸图 基本组件
特征曲线
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/3/26 下午12:40