.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
CSS 14-34F0-S-D-M-ST
CSS 14-34F0-S-D-M-ST
| Produkt-typebetegnelse: CSS (1)-34-(2)-(3)-(4)-M-(5) |
| (1) | |
| 12 | Aktuering fra toppen |
| 14 | Aktuering fra side |
| (2) | |
| uten | Standardutførelse |
| F0 | Inngang for aktivering av trykknapp, egnet for automatisk start |
| F1 | Inngang for tilbakestillings-trykknapp, med kantovervåking |
| (3) | |
| S | Aktivt område på siden |
| V | Aktivt område foran |
| (4) | |
| D | Med diagnostisk utgang |
| SD | seriell diagnostisk utgang |
| (5) | |
| L | med ferdigkoblet kabel |
| ST | med stikkontakt |
- 1 x connector plug M12, 8-pole
- Actuation from side
- without edge monitoring of the enabling pushbutton, suitable for automatic start
- To control positive-guided relay without downstream safety monitoring module
- Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
- Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to ISO 13849-1
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Misaligned actuation possible
- 27 mm x 108.2 mm x 35 mm
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- 2 short-circuit proof PNP safety outputs
- Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Ordering data
| Product type description |
CSS 14-34F0-S-D-M-ST |
| Article number (order number) |
101188767 |
| EAN (European Article Number) |
4030661354866 |
| eCl@ss number, version 12.0 |
27-27-46-01 |
| eCl@ss number, version 11.0 |
27-27-24-03 |
| eCl@ss number, version 9.0 |
27-27-24-03 |
| ETIM number, version 7.0 |
EC001829 |
| ETIM number, version 6.0 |
EC001829 |
Approvals - Standards
| Certificates |
cULus |
General data
| Standards |
EN IEC 60947-5-3 |
| Working principle |
induktiv |
| Housing construction form |
Blokk |
| Installation conditions (mechanical) |
ikke i flukt |
| Sensor topology |
Sensor for seriekabling |
| Housing material |
Plast, glassfiber forsterket termoplast |
| Active area |
Plast, glassfiber forsterket termoplast |
| Reaction time, maximum |
30 ms |
| Duration of risk, maximum |
60 ms |
| Gross weight |
142 g |
General data - Features
| Diagnostic output |
Ja |
| Short circuit detection |
Ja |
| Cross-circuit detection |
Ja |
| Safety functions |
Ja |
| Cascadable |
Ja |
| Input for enabling pushbutton, suitable for automatic start |
Ja |
| Integral system diagnostics, status |
Ja |
| Number of LEDs |
3 |
| Number of semi-conductor outputs with signaling function |
1 |
| Number of fail-safe digital outputs |
2 |
| Number of series-wiring of sensors |
31 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Performance Level, up to |
e |
| Category |
4 |
| PFH value |
3,60 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Mission time |
20 Year(s) |
Mechanical data
| Actuating panels |
på side |
| Active area |
på side |
| Switching distance actuator |
Actuator CST 34-V-1: 10 mm (typical switch distance Sn) Betätiger CST 34-V-1: 8 mm (gesicherter Schaltabstand EIN Sao) Betätiger CST 34-V-1: 13 mm (gesicherter Schaltabstand AUS Sar) Actuator CST 34-S-1 / CST 34-S-3: 14 mm (typical switch distance Sn) Actuator CST 34-S-1 / CST 34-S-3: 12 mm (ensured switch distance ON Sao) Actuator CST 34-S-1 / CST 34-S-3:: 17 mm (ensured switch distance OFF Sar) Actuator CST 34-S-2: 14 mm (typical switch distance Sn) Actuator CST 34-S-2: 12 mm (ensured switch distance ON Sao) Betätiger CST 34-S-2: 17 mm (gesicherter Schaltabstand AUS Sar) Betätiger CST 180-1 / CST 180-2: 10 mm (typischer Schaltabstand Sn) Actuator CST 180-1 / CST 180-2: 8 mm (ensured switch distance ON Sao) Actuator CST 180-1 / CST 180-2: 13 mm (ensured switch distance OFF Sar) |
Mechanical data - Switching distances
| Hysteresis (Switching distance), maximum |
1,5 mm |
| Repeat accuracy R |
0,5 mm |
| Note (Repeat accuracy R) |
Den lange siden tillater en maksimal feiljustering av høyden (x) for sensor og aktuator på 36 mm (f. eks. monteringstoleranse eller på grunn av at vaktdøren siger ned). Økt offset, maks. 53 mm, mulig ved bruk av aktivator CST 34-S-2. Aksial offset (y) er max. ± 10 mm (se tegning: funksjonsprinsipp). |
Mechanical data - Connection technique
| Note (length of the sensor chain) |
Cable length and cross-section change the voltage drop dependiing on the output current |
| Termination |
Konnektorplugg M12, 8-polet |
Mechanical data - Dimensions
| Length of sensor |
35 mm |
| Width of sensor |
27 mm |
| Height of sensor |
108,2 mm |
Ambient conditions
| Degree of protection |
IP65 IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Storage and transport temperature |
-25 ... +85 °C |
| Resistance to vibrations |
10 … 55 Hz, Amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
32 VDC |
| Rated impulse withstand voltage Uimp |
0,8 kV |
| Overvoltage category |
III |
| Degree of pollution |
3 |
Electrical data
| No-load supply current I0, typical |
100 mA |
| Operating current |
600 mA |
| Required rated short-circuit current |
100 A |
| Note (Electrical data, Fuse rating) |
(Strømbryter) |
| Switching frequency, approx. |
3 Hz |
| Utilisation category DC-12 |
24 VDC / 0,05 A |
Electrical data - Safety digital outputs
| Rated operating current (safety outputs) |
250 mA |
| Output current, (fail-safe output), maximum |
0,25 A |
| Design of control elements |
p-type |
| Voltage drop Ud, maximum |
0,5 V |
| Leakage current Ir, maximum |
0,5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Current, Utilisation category DC-12 |
0,25 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
0,25 A |
Electrical data - Diagnostic outputs
| Design of control elements |
p-type |
| Voltage drop Ud, maximum |
5 V |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Current, Utilisation category DC-12 |
0,05 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
0,05 A |
Electrical data - Electromagnetic compatibility (EMC)
| Interfering radiation |
IEC 61000-6-4 |
| EMC rating |
IEC 61000-6-2 |
Pin assignment
| PIN 1 |
1A1 Ue: (1) |
| PIN 2 |
X1 Sikkerhetsinngang 1 |
| PIN 3 |
A2 GND |
| PIN 4 |
Y1 Sikkerhetsutgang 1 |
| PIN 5 |
OUT DIagnostisk utgang OUT |
| PIN 6 |
X2 Sikkerhetsinngang 2 |
| PIN 7 |
Y2 Sikkerhetsutgang 2 |
| PIN 8 |
IN uten funksjon |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
CST 34-S-2 CST 34-S-3 CST 180-1 CST 180-2 CST 34-S-1 |
| Recommended safety switchgear |
PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
Krav til evalueringen: Tokanals sikkerhetsinngang, egnet for p-koblende sensorer med lukkerfunksjon. Funksjonstest av sensorene med syklisk utkobling i maks. 0,5 ms må tolereres av evalueringen. Kortslutningsgjenkjenning er ikke nødvendig i evalueringen. |
Språk filter
Datablad
Bruksanvisning og konformitetserklæring
UL sertifikat
kablingseksempel (elektr. kabling)
Brosjyre
SISTEMA-VDMA Bibliotek/Library
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
Dimensjonsriktig tegning grunnenhet
Kontaktplassering
Clipart
101210561 A-K8P-M12-S-W-5M-BK-1-X-A-4-69-VA
- 5 m
- angled
- Pre-wired cable
- 8-pole
101210560 A-K8P-M12-S-G-5M-BK-1-X-A-4-69-VA
- 5 m
- Pre-wired cable
- 8-pole
103011415 A-K8P-M12-S-G-2.5M-BK-2-X-A-4-69
- 2.5 m
- Pre-wired cable
- 8-pole
103007358 A-K8P-M12-S-G-5M-BK-2-X-A-4-69
- 5 m
- Pre-wired cable
- 8-pole
103014823 A-K8P-M12-S-G-15M-BK-1-X-A-4-69-VA
- 15
- Pre-wired cable
- 8-pole
103001389 A-K8P-M12-S-G-10M-BK-1-X-A-4-69-VA
- 10 m
- Pre-wired cable
- 8-pole
103007359 A-K8P-M12-S-G-10M-BK-2-X-A-4-69
- 10 m
- Pre-wired cable
- 8-pole
101181085 CST 34-S-1
- Actuation from side
101196101 CST 34-S-2
- Actuator with double solenoid
- for increased misalignment
- Front and lateral actuation of the sensor possible
101203434 CST 34-S-3
- Front and lateral actuation of the sensor possible
- small body
103009970 SRB-E-201LC
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 2 Safety outputs 2 A
- 1 Signalling output
103009973 SRB-E-204ST
- Plug-in screw terminals with coding
- STOP 0 Function
- Monitoring of 4 sensors
- Start button / Auto-start
- 2 Safety outputs
- 4 Signalling outputs
103007672 SRB-E-301ST
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 1 Auxiliary contact
- 3 safety contacts
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | CSS 34F0 CSS 34F1 |
| Type: | See ordering code |
| Description of the component: | Non-contact safety sensor |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 ISO 14119:2013 EN ISO 13849-1:2015 EN 61508 parts 1-7:2010 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Alboinstraße 56, 12103 Berlin ID n°: 0035 |
| Type Examination Certificate: | 01/205/5194.02/19 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Ort und Datum der Ausstellung: | Wuppertal, November 13, 2019 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | CSS 34F0 CSS 34F1 |
| Type: | See ordering code |
| Description of the component: | Non-contact safety sensor |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-3:2013 ISO 14119:2013 EN ISO 13849-1:2015 EN 61508 parts 1-7:2010 |
| Approved body for Type Examination: | TÜV Rheinland UK Ltd. 1011 Stratford Road Solihull, B90 4BN ID: 2571 |
| Type examination certificate: | 01/205U/5194.00/22 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, February 6, 2023 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generert til 11.04.2025, 12:25