CSS 14-34F0-S-D-M-ST

Item number: 101188767

CSS 14-34F0-S-D-M-ST

Item number: 101188767

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Amount

Product type description:

CSS (1)-34-(2)-(3)-(4)-M-(5)

(1)
12	Actuation from top
14	Actuation from side

(2)
without	Standard version
F0	Input for enabling pushbutton, suitable for automatic start
F1	Input for reset pushbutton, with edge monitoring

(3)
S	lateral active surface
V	frontal active surface

(4)
D	With diagnostic output
SD	Serial diagnostic output

(5)
L	with connecting cable
ST	with connector

Not all component variants, which are possible according to this order code are available and/or technically feasible.

1 x connector plug M12, 8-pole
Actuation from side
without edge monitoring of the enabling pushbutton, suitable for automatic start
To control positive-guided relay without downstream safety monitoring module
Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to ISO 13849-1
Thermoplastic enclosure
Electronic contact-free, coded system
Misaligned actuation possible
27 mm x 108.2 mm x 35 mm
High repeat accuracy of the switching points
Max. length of the sensor chain 200 m
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Ordering data

Product type description	CSS 14-34F0-S-D-M-ST
Article number (order number)	101188767
EAN (European Article Number)	4030661354866
eCl@ss number, version 12.0	27-27-46-01
eCl@ss number, version 11.0	27-27-24-03
eCl@ss number, version 9.0	27-27-24-03
ETIM number, version 7.0	EC001829
ETIM number, version 6.0	EC001829

Approvals - Standards

Certificates	TÜV cULus UKCA

General data

Standards	EN IEC 60947-5-3
Working principle	inductive
Housing construction form	Block
Installation conditions (mechanical)	not flush
Sensor topology	Sensor for series wiring
Housing material	Glass-fibre, reinforced thermoplastic
Active area	Glass-fibre, reinforced thermoplastic
Reaction time, maximum	30 ms
Duration of risk, maximum	60 ms
Gross weight	142 g

General data - Features

Diagnostic output	Yes
Short circuit detection	Yes
Cross-circuit detection	Yes
Safety functions	Yes
Cascadable	Yes
Input for enabling pushbutton, suitable for automatic start	Yes
Integral system diagnostics, status	Yes
Number of LEDs	3
Number of semi-conductor outputs with signaling function	1
Number of fail-safe digital outputs	2
Number of series-wiring of sensors	31

Safety classification

Standards	EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	3.60 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Actuating panels	lateral
Active area	lateral
Switching distance actuator	Actuator CST 34-V-1: 10 mm (typical switch distance Sn) Actuator CST 34-V-1: 8 mm (ensured switch distance ON Sao) Actuator CST 34-V-1: 13 mm (ensured switch distance OFF Sar) Actuator CST 34-S-1 / CST 34-S-3: 14 mm (typical switch distance Sn) Actuator CST 34-S-1 / CST 34-S-3: 12 mm (ensured switch distance ON Sao) Actuator CST 34-S-1 / CST 34-S-3:: 17 mm (ensured switch distance OFF Sar) Actuator CST 34-S-2: 14 mm (typical switch distance Sn) Actuator CST 34-S-2: 12 mm (ensured switch distance ON Sao) Actuator CST 34-S-2: 17 mm (ensured switch distance OFF Sar) Actuator CST 180-1 / CST 180-2: 10 mm (typical switch distance Sn) Actuator CST 180-1 / CST 180-2: 8 mm (ensured switch distance ON Sao) Actuator CST 180-1 / CST 180-2: 13 mm (ensured switch distance OFF Sar)

Mechanical data - Switching distances according EN IEC 60947-5-3

Hysteresis (Switching distance), maximum	1.5 mm
Repeat accuracy R	0.5 mm
Note (Repeat accuracy R)	Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 36 mm (e.g. mounting tolerance or due to guard door sagging). Increased misalignment, max. 53 mm, possible when the CST 34-S-2 actuator is used. The axial misalignment (y) is max. ± 10 mm (see figure: Operating principle)

Mechanical data - Connection technique

Note (length of the sensor chain)	Cable length and cross-section change the voltage drop dependiing on the output current
Termination	Connector plug M12, 8-pole

Mechanical data - Dimensions

Length of sensor	35 mm
Width of sensor	27 mm
Height of sensor	108.2 mm

Ambient conditions

Degree of protection	IP65 IP67
Ambient temperature	-25 ... +70 °C
Storage and transport temperature	-25 ... +85 °C
Resistance to vibrations	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

No-load supply current I₀, typical	100 mA
Operating current	600 mA
Required rated short-circuit current	100 A
Note (Electrical data, Fuse rating)	(Circuit breaker)
Switching frequency, approx.	3 Hz
Utilisation category DC-12	24 VDC / 0.05 A

Electrical data - Safety digital outputs

Rated operating current (safety outputs)	250 mA
Output current, (fail-safe output), maximum	0.25 A
Design of control elements	p-type
Voltage drop U_d, maximum	0.5 V
Leakage current I_r, maximum	0.5 mA
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.25 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.25 A

Electrical data - Diagnostic outputs

Design of control elements	p-type
Voltage drop U_d, maximum	5 V
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.05 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.05 A

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation	IEC 61000-6-4
EMC rating	IEC 61000-6-2

Pin assignment

PIN 1	1A1 Ue: (1)
PIN 2	X1 Safety input 1
PIN 3	A2 GND
PIN 4	Y1 Safety output 1
PIN 5	OUT Diagnostic output OUT
PIN 6	X2 Safety input 2
PIN 7	Y2 Safety output 2
PIN 8	IN without function

Scope of delivery

Scope of delivery	Actuator must be ordered separately.

Accessory

Recommendation (actuator)	CST 34-S-2 CST 34-S-3 CST 180-1 CST 180-2 CST 34-S-1
Recommended safety switchgear	PROTECT PSC1 SRB-E-301ST SRB-E-201LC

Note

Note (General)	Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Product picture (catalogue individual photo)

ID: kcss3f09

| 273.0 kB | .jpg | 352.778 x 235.303 mm - 1000 x 667 px - 72 dpi

| 21.0 kB | .png | 74.083 x 49.389 mm - 210 x 140 px - 72 dpi

| 41.6 kB | .jpg | 123.472 x 82.197 mm - 350 x 233 px - 72 dpi

Dimensional drawing basic component

ID: 1css3g01

| 50.7 kB | .cdr |

| 4.4 kB | .png | 73.731 x 79.022 mm - 209 x 224 px - 72 dpi

| 204.8 kB | .jpg | 352.778 x 377.119 mm - 1000 x 1069 px - 72 dpi

Operating principle

ID: kcss3a02

| 46.4 kB | .cdr |

| 321.9 kB | .jpg | 352.778 x 796.219 mm - 1000 x 2257 px - 72 dpi

| 5.5 kB | .png | 74.083 x 167.217 mm - 210 x 474 px - 72 dpi

Contact arrangement

ID: km23-k8b

| 5.3 kB | .png | 73.731 x 79.728 mm - 209 x 226 px - 72 dpi

| 139.8 kB | .jpg | 352.778 x 380.647 mm - 1000 x 1079 px - 72 dpi

Clipart

ID: kcss3c06

| 16.0 kB | .cdr |

| 932.0 b | .png | 74.083 x 35.983 mm - 210 x 102 px - 72 dpi

Actuator

Control-Modul

EU Conformity Declaration

Pdf

EU-Konformitätserklärung

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Erklärung:

Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen.

Bezeichnung des Bauteils:

CSS 34F0
CSS 34F1

Typ:

siehe Typenschlüssel

Beschreibung des Bauteils:

Berührungslos wirkender Sicherheits-Sensor

Einschlägige Richtlinien:	Maschinenrichtlinie	2006/42/EG
	EMV-Richtlinie	2014/30/EU
	RoHS-Richtlinie	2011/65/EU

Angewandte Normen:

EN 60947-5-3:2013
ISO 14119:2013
EN ISO 13849-1:2015
EN 61508 Teile 1-7:2010
EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Benannte Stelle der Baumusterprüfung:

TÜV Rheinland Industrie Service GmbH
Alboinstraße 56, 12103 Berlin
Kenn-Nr.: 0035

Baumusterprüfbescheinigung:

01/205/5194.02/19

Bevollmächtigter für die Zusammenstellung der technischen Unterlagen:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Ort und Datum der Ausstellung:

Wuppertal, 13. November 2019

Rechtsverbindliche Unterschrift
Philip Schmersal
Geschäftsführer

Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 30/04/2024, 11:26

Cart

Login Register now

CSS 14-34F0-S-D-M-ST