.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
SE-100 C EVALUATION UNIT
SE-100 C EVALUATION UNIT
- To monitor 1 ... 2 safety edge(s)
- 1 safety contact, STOP 0
- 1 Signalling output
Ordering data
| Product type description |
SE-100 C EVALUERINGSENHET |
| Article number (order number) |
101153919 |
| EAN (European Article Number) |
4030661289168 |
| eCl@ss number, version 12.0 |
27-37-18-19 |
| eCl@ss number, version 11.0 |
27-37-18-19 |
| eCl@ss number, version 9.0 |
27-37-18-19 |
| ETIM number, version 7.0 |
EC001449 |
| ETIM number, version 6.0 |
EC001449 |
Approvals - Standards
| Certificates |
TÜV cULus |
General data
| Standards |
EN ISO 13849-1 EN ISO 13850 |
| Climatic stress |
EN ISO 13856-2 |
| Housing material |
Plast, termoplast |
| Reaction time, maximum |
16 ms |
| Gross weight |
166 g |
General data - Features
| Electronic Fuse |
Ja |
| Wire breakage detection |
Ja |
| Cross-circuit detection |
Ja |
| Automatic reset function |
Ja |
| Reset after disconnection of supply voltage |
Ja |
| Earth connection detection |
Ja |
| Integral system diagnostics, status |
Ja |
| Number of auxiliary contacts |
1 |
| Number of LEDs |
2 |
| Number of safety contacts |
1 |
| Number of signalling outputs |
1 |
| Safety classification |
| Performance Level, up to |
c |
| Category |
1 |
| Control category to EN954 |
1 |
| PFH value |
2,24 x 10⁻⁶ /h |
| Note (PFH-value) |
Opp til maks. 5 000 omkoblingssykluser/år |
| Mission time |
20 Year(s) |
| Stop-Category |
0 |
Mechanical data
| Mechanical lifetime, minimum |
20.000.000 Operations |
| Mounting |
kneppes inn på standard DIN-skinne iht. EN 60715 |
Mechanical data - Connection technique
| Length of cable |
200 m |
| Cable section, maximum |
2 x 1,5 mm² |
| Note |
Alle indikasjoner om kabelsnittet inkluderer lederhylsene. |
| Terminal (mechanical) |
1000075113 |
Mechanical data - Dimensions
| Width |
22,5 mm |
| Height |
100 mm |
| Depth |
121 mm |
Ambient conditions
| Degree of protection of the enclosure |
IP40 |
| Degree of protection of the installation space |
IP54 |
| Degree of protection of clips or terminals |
IP20 |
| Ambient temperature |
+5 ... +55 °C |
| Resistance to vibrations |
10 … 55 Hz, Amplitude 0,15 mm |
Ambient conditions - Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
| Overvoltage category |
III |
| Degree of pollution |
2 |
Electrical data
| Operating voltage |
24 VDC -10 % / +20 % |
| Rated operating voltage |
24 VDC |
| Operating current |
150 mA |
| Rated AC voltage for controls at DC minimum |
21,6 VDC |
| Rated control voltage at DC, maximum |
28,8 VDC |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
2 A |
| Electrical power consumption, maximum |
4 W |
| Time to readiness, maximum |
300 ms |
Electrical data - Electromagnetic compatibility (EMC)
| EMC rating |
EMC-Directive |
Status indication
| Indicated operating states |
Sikkerhetskant-funksjon |
Other data
| Note (applications) |
Sikkerhetslist |
Note
| Note (General) |
Den totale maskinsikkerheten avhenger av profesjonell montering og installasjon av sikkerhetsovervåkingsmodulen og signalsenderen, såvel som av korrekt og profesjonell elektrisk tilkobling av komponentene. Hvis det er noen risiko overhodet, kan ikke maskinen startes på nytt. |
Wiring example
| Note (Wiring diagram) |
Overvåking av sikkerhetskantene SE 40 / SE 70 med en sikkerhets-overvåkingsenhet SE-100C opp til PL c og kategori 1. Dersom bare én sikkerhetskant er tilkoblet, må terminalene S12/S22 være overkoblet. Den manuelle tilbakestillingsfunksjonen må om nødvedig aktiveres i maskinkontrollen. Både reinstalasjon og autonullstilling må overensstemme med kravene i EN 1760-2 (diagram A2, A3). Kabingsskjemaet viser de-enerigsert tilstand. |
Språk filter
Datablad
Bruksanvisning og konformitetserklæring
UL sertifikat
TÜV-sertifisering
SISTEMA-VDMA Bibliotek/Library
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
kablingseksempel
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SE-100 C |
| Type: | See ordering code |
| Description of the component: | Safety-monitoring module for monitoring optoelectronic safety edges of the SE 40/70 series with SE-SET sensor kit |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN ISO 13856-2:2013 EN ISO 13849-1:2023 EN 12978:2003 + A1:2009 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| EC-Type Examination Certificate: | 01/205/5007.03/25 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, May 12, 2025 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generert til 18.08.2025, 16:54