.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
AZM 161SK-12/12RITD-024-B1
项目编号:
103008166
| 产品描述: AZM 161(1)(2)(3)I(4)(5)(6)(7)(8)(9) |
| (1) | |
| CC | 笼式接线夹 |
| SK | 螺丝端子 |
| ST | M12 连接器 |
| (2) | |
| 11/03 | 磁铁: 1 NO 触点, 1 NC 触点/操动件： 3 NC 触点 触点, 带连接器插头 |
| 12/11 | 磁铁: 1 NO 触点 2 NC 触点 / 操动件：1 NO 触点 1 NC 触点, 带连接器插头 |
| 12/03 | 磁铁: 1 NO 触点, 2 NC 触点/ 操动件：3 NC 触点 |
| 11/12 | 磁铁: 1 NO 触点 2 NC 触点 / 操动件：1 NO 触点 1 NC 触点, 带连接器插头 |
| 12/12 | 磁铁: 1 NO 触点, 2 NC 触点 /操动件：1 NO触点 2 NC触点 |
| (3) | |
| 无 | 扣紧力5N |
| R | 扣紧力30N |
| (4) | |
| 无 | 通电开锁 |
| A | 通电上锁 |
| (5) | |
| 无 | 侧向手动解锁 |
| ED | 盖板面手动解锁 |
| EU | 背面手动解锁 |
| (6) | |
| T | 侧面紧急出口 |
| TD | 盖板面紧急出口 |
| TU | 背面紧急出口 |
| N | 紧急解锁 |
| (7) | |
| 024 | Us: 24 VAC/DC |
| 110/230 | Us: 110/230 VAC |
| (8) | |
| 无 | 无LED |
| G | 带LED（仅用于Us: 24 VAC/DC） |
| (9) | |
| B1 | 包括弯角操动件B1 |
| B1E | 包括弯角操动件B1E |
| B6L | 包括左操动件B6 |
| B6R | 包括右操动件B6 |
| B1-1747 | 包括弯角操动件B1-1747 |
| B1-2024 | 包括弯角操动件B1-2024 |
| B1-2053 | 包括弯角操动件B1-2053 |
| B1-2177 | 包括弯角操动件B1-2177 |
并非所有根据本订单代码可能的组件变体都可用和/或在技术上可行。
- Emergency exit, lateral
- 1 Cable entry M 20 x 1.5
- Screw connection
- Manual release
- Compact design
- Interlock with protection against incorrect locking.
- Individual coding
- Coding level "High" according to ISO 14119
- Double-insulated
- High holding force
- Long life
- 130 mm x 90 mm x 30 mm
- Particularly suitable for sliding doors
Ordering data
| Product type description |
AZM 161SK-12/12RITD-024-B1 |
| Article number (order number) |
103008166 |
| EAN (European Article Number) |
4030661452012 |
| eCl@ss number, version 12.0 |
27-27-26-03 |
| eCl@ss number, version 11.0 |
27-27-26-03 |
| eCl@ss number, version 9.0 |
27-27-26-03 |
| ETIM number, version 7.0 |
EC002593 |
| ETIM number, version 6.0 |
EC002593 |
Approvals - Standards
| Certificates |
IFA cULus CCC |
General data
| Standards |
EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
| Coding |
独立编码 |
| Coding level according to EN ISO 14119 |
高 |
| Working principle |
机电 |
| Housing material |
玻璃纤维，加强型热塑塑料 |
| Material of the actuator |
不锈钢 |
| Gross weight |
520 g |
General data - Features
| Power to unlock |
是 |
| Emergency exit |
是 |
| Manual release |
是 |
| Number of actuating directions |
3 |
| Number of auxiliary contacts |
2 |
| Number of safety contacts |
4 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 |
| Performance Level, up to |
c |
| Category |
1 |
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
| Note |
按要求提供电气寿命。 |
| B10D Normally-open contact (NO) |
1,000,000 Operations |
| Note |
在10% Ie 及阻性负载时 |
| Mission time |
20 Year(s) |
| Safety classification - Fault exclusion |
| Please note: |
可用于允许排除单通道机构危险损坏的故障，并确保有足够的防操纵保护。 |
| Performance Level, up to |
d |
| Category |
3 |
| Note |
用于双通道，并配有合适的逻辑单元。 |
| Mission time |
20 Year(s) |
Safety classification - Guard locking function
| Performance Level, up to |
e |
| Note (Performance Level) |
防护装置锁定功能的安全分类信息在 "操作说明 "或 "操作和安装 "说明中均有记载。 |
Mechanical data
| Actuating radius, minimum |
150 mm |
| Mechanical life, minimum |
1,000,000 Operations |
| Actuating play in direction of actuation |
5.5 mm |
| Holding force FZh in accordance with EN ISO 14119 |
2,000 N |
| Holding force Fmax, maximum |
2,600 N |
| Latching force |
30 N |
| Positive break travel |
10 mm |
| Positive break force per NC contact, minimum |
10 N |
| Positive break force, minimum |
20 N |
| Actuating speed, maximum |
2 m/s |
| Mounting |
螺钉 |
| Type of the fixing screws |
3x M6 |
| Tightening torque of the fastening screws for the housing cover |
0.6 Nm |
| Note |
The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. |
Mechanical data - Connection technique
| Cable entry |
4 x M16 x 1,5 |
| Termination |
螺丝端子 |
| Cable section, minimum |
.25 mm² |
| Cable section, maximum |
1.5 mm² |
| Note |
包括导体套管在内的所有指标。 |
| Allowed type of cable |
实心单线 实心多导线 可调 |
Mechanical data - Dimensions
| Length of sensor |
30 mm |
| Width of sensor |
130 mm |
| Height of sensor |
90 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-30 ... +60 °C |
| Storage and transport temperature |
-25 ... +85 °C |
| Note (Relative humidity) |
无冷凝 不结冰 |
| Protection class |
II |
| Permissible installation altitude above sea level, maximum |
2,000 m |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Rated control voltage |
24 VAC/DC |
| Required rated short-circuit current |
1,000 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
NO触点，NC触点 |
| Switching principle |
缓动型，肯定断开常闭触点 |
| Maximale Schalthäufigkeit |
1,000 /h |
| Material of the contacts, electrical |
银 |
Electrical data - Magnet control
| Magnet switch-on time |
100 % |
| Test pulse duration, maximum |
5 ms |
| Test pulse interval, minimum |
50 ms |
Electrical data - Safety contacts
| Voltage, Utilisation category AC-15 |
230 VAC |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2.5 A |
Electrical data - Auxiliary contacts
| Voltage, Utilisation category AC-15 |
230 VAC |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2.5 A |
Other data
| Note (applications) |
滑动安全门 可拆卸防护门 铰链式安全防护装门 |
Scope of delivery
| Scope of delivery |
不作为备件提供 槽密封塞 操动件包含在发货范围中 |
Note
| Note (General) |
铰链的旋转轴必须处于高出安全开关上表面5 mm处的平面内。 铰链门上的最小操动半径与操动件的平面保持一致，为150 mm 操动件窄边旋转防护系统上的最小操动半径为 180 mm 执行机构不单独提供。 |
| Note (Emergency exit) |
可以从顶部（订货后缀 -TD）或后部（订货后缀 -TU）安装 在需要在危险区域内部进行紧急操动的情况下 |
语言条件
数据表
操作指南及符合性声明
CCC认证
手册
下载最新版本的Adobe Reader
产品图片（单独目录照片）
尺寸图 基本组件
尺寸图 基本组件
尺寸图 操动件
尺寸图 其他
开关行程图
触点关闭 
常开触点 
设置范围
锁定点
肯定断开路径/角度
电磁锁监控 依据EN ISO 14119
肯定断开常闭触点
操动 
未操动
常开触点
常闭触点
Accessories
101110500 LOCKOUT TAG SZ 16/335
- To prevent inadvertent closing, e.g. during maintenance
- For complex plant
- Prevents actuation of the switch
- Up to 6 padlocks can be fitted
- The lockout tag can be mounted on a chain near to the safety switch
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | AZM 161 I |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 EN ISO 14119:2013 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, March 30, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | AZM 161 I |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | DIN EN 60947-5-1:2018 EN ISO 14119:2013 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, November 9, 2021 |
| |
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/6/23 上午10:01