CSP 11-34-D-M-ST
- 1 x connector plug M12, 8-pole
- Actuation from side
- without On-site acknowledgment
- NOTICE: Not available! (Replacement: RSS 36 I)
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Tampering protection by paired coding of sensor and actuator
- Misaligned actuation possible
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- 2 short-circuit proof PNP safety outputs
- Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Ordering data
Note (Delivery capacity) |
不支持! |
Product type description |
CSP 11-34-D-M-ST |
Article number (order number) |
101208004 |
EAN (European Article Number) |
4030661382012 |
eCl@ss number, version 12.0 |
27-27-26-06 |
eCl@ss number, version 11.0 |
27-27-24-04 |
eCl@ss number, version 9.0 |
27-27-24-04 |
ETIM number, version 7.0 |
EC001487 |
ETIM number, version 6.0 |
EC001487 |
Approvals - Standards
Certificates |
cULus |
General data
Standards |
EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
Working principle |
感应 |
Housing construction form |
块体 |
Installation conditions (mechanical) |
非冲洗 |
Sensor topology |
串联传感器 |
Housing material |
玻璃纤维,加强型热塑塑料 |
Active area |
玻璃纤维,加强型热塑塑料 |
Reaction time, maximum |
30 ms |
Duration of risk, maximum |
60 ms |
Gross weight |
111 g |
General data - Features
Diagnostic output |
是 |
Short circuit detection |
是 |
Cross-circuit detection |
是 |
Safety functions |
是 |
Cascadable |
是 |
Integral system diagnostics, status |
是 |
Number of LEDs |
3 |
Number of semi-conductor outputs with signaling function |
1 |
Number of fail-safe digital outputs |
2 |
Number of series-wiring of sensors |
31 |
Safety classification |
Vorschriften |
EN IEC 60947-5-3 EN IEC 61508 |
Performance Level, up to |
e |
Category |
4 |
PFH value |
3.60 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Mechanical data
Actuating panels |
横向 |
Active area |
横向 |
Mechanical data - Switching distances
Switch distance, typical |
11 mm |
Assured switching distance "ON" Sao |
8 mm |
Assured switching distance "OFF" Sar |
15 mm |
Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-3 |
Hysteresis (Switching distance), maximum |
1.5 mm |
Repeat accuracy R |
0.5 mm |
Note (Repeat accuracy R) |
注意:轴向偏移长侧允许传感器和操动件的最大高度偏差(X)为30 mm (例如安装容差,或因防护门下垂)。轴向偏差 (y)最大± 8 mm。 |
Mechanical data - Connection technique
Note (length of the sensor chain) |
根据输出电流,电缆长度和电缆截面会改变电压降 |
Termination |
连接插头M12,8针 |
Mechanical data - Dimensions
Length of sensor |
27 mm |
Width of sensor |
35 mm |
Height of sensor |
108.2 mm |
Ambient conditions
Degree of protection |
IP65 IP67 |
Ambient temperature |
-25 ... +70 °C |
Storage and transport temperature |
-25 ... +85 °C |
Resistance to vibrations |
10 ... 55 Hz,振幅 1 mm |
Restistance to shock |
30 g / 11 ms |
Protection class |
II |
Ambient conditions - Insulation values
Rated insulation voltage Ui |
32 VAC/DC |
Rated impulse withstand voltage Uimp |
0.8 kV |
Overvoltage category |
III |
Degree of pollution |
3 |
Electrical data
Operating voltage |
24 VDC -15 % / +10 % |
No-load supply current I0, typical |
100 mA |
Rated operating voltage |
24 VDC |
Operating current |
600 mA |
Required rated short-circuit current |
100 A |
Utilisation category DC-12 |
24 VDC |
Utilisation category DC-12 |
0.05 A |
Utilisation category DC-13 |
24 VDC |
Utilisation category DC-13 |
0.05 A |
Note (Electrical data, Fuse rating) |
(断路器) |
Switching frequency, approx. |
3 Hz |
Utilisation category DC-12 |
24 VDC / 0.05 A |
Electrical fuse rating, maximum |
2 A |
Electrical data - Safety digital outputs
Rated operating current (safety outputs) |
250 mA |
Output current, (fail-safe output), maximum |
0.25 A |
Design of control elements |
P型 |
Voltage drop Ud, maximum |
0.5 V |
Leakage current Ir, maximum |
0.5 mA |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0.25 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0.25 A |
Electrical data - Digital Output
Design of control elements |
P型 |
Electrical data - Diagnostic outputs
Operating current |
50 mA |
Voltage drop Ud, maximum |
5 V |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0.05 A |
Electrical data - Electromagnetic compatibility (EMC)
Interfering radiation |
IEC 61000-6-4 |
EMC rating |
IEC 61000-6-2 |
Pin assignment
PIN 1 |
1A1 Ue: (1) |
PIN 2 |
X1 安全输入 1 |
PIN 3 |
A2 GND |
PIN 4 |
Y1 安全输出 1 |
PIN 5 |
OUT 诊断输出OUT |
PIN 6 |
X2 安全输入 2 |
PIN 7 |
Y2 安全输出 2 |
PIN 8 |
IN 无功能 |
Scope of delivery
Scope of delivery |
操动件#必须单独订购. |
Accessory
Recommendation (actuator) |
CSP 34-S-1 |
Recommended safety switchgear |
PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
Note
Note (General) |
评估要求:双通道安全输入,适用于P型传感器,带NO功能。安全监控模块必须允许传感器通过循环断开传感器输出来进行内部测试,断开时间最长.5 ms。无需通过评估进行短路识别。 安全传感器和操动件的编码:为了首次激活CSP 34的安全功能(编码),必须将相关的操动件带入打开的安全传感器的检测区域。操动件自动编码过程通过安全传感器上的红色LED点亮和黄色LED同时闪烁来发出信号。10秒后,循环闪烁表示安全传感器的电源电压应关闭几秒,以便保存代码。 |
语言条件
数据表
操作指南及符合性声明
接线图示(电线)
手册
SISTEMA-VDMA 数据库
下载最新版本的Adobe Reader
产品图片(单独目录照片)
尺寸图 基本组件
工作原理
特征曲线
101218843 RSS 36-I1-D
- Individual coding with RFID technology
- Coding level "High" according to ISO 14119
- 1 x Pre-wired cable 8-pole
- Actuation from side
- Thermoplastic enclosure
- RFID-technology for needs-based protection against tampering
- Misaligned actuation possible
- 27 mm x 108.2 mm x 35 mm
- High repeat accuracy of the switching points
- 2 short-circuit proof PNP safety outputs
- Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
101216958 RSS 36-I1-D-ST
- Individual coding with RFID technology
- Coding level "High" according to ISO 14119
- 1 x connector socket M12, 8-pole
- Actuation from side
- Thermoplastic enclosure
- RFID-technology for needs-based protection against tampering
- Misaligned actuation possible
- 27 mm x 108.2 mm x 35 mm
- High repeat accuracy of the switching points
- 2 short-circuit proof PNP safety outputs
- Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/8/2 上午6:20