schmersal_s_icon.png

CSP 11-34-D-M-ST

Item number: 101208004
Archive
CSP 11-34-D-M-ST

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
  • 1 x connector plug M12, 8-pole
  • Actuation from side
  • without On-site acknowledgment
  • NOTICE: Not available! (Replacement: RSS 36 I)
  • Thermoplastic enclosure
  • Electronic contact-free, coded system
  • Tampering protection by paired coding of sensor and actuator
  • Misaligned actuation possible
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Ordering data

Note (Delivery capacity)

Not available!
Product type description

CSP 11-34-D-M-ST
Article number (order number)

101208004
EAN (European Article Number)

4030661382012
eCl@ss number, version 12.0

27-27-26-06
eCl@ss number, version 11.0

27-27-24-04
eCl@ss number, version 9.0

27-27-24-04
ETIM number, version 7.0

EC001487
ETIM number, version 6.0

EC001487

Approvals - Standards

Certificates

cULus

General data

Standards

EN ISO 13849-1

EN IEC 60947-5-3

EN IEC 61508
Working principle

inductive
Housing construction form

Block
Installation conditions (mechanical)

not flush
Sensor topology

Sensor for series wiring
Housing material

Glass-fibre, reinforced thermoplastic
Active area

Glass-fibre, reinforced thermoplastic
Reaction time, maximum

30 ms
Duration of risk, maximum

60 ms
Gross weight

111 g

General data - Features

Diagnostic output

Yes
Short circuit detection

Yes
Cross-circuit detection

Yes
Safety functions

Yes
Cascadable

Yes
Integral system diagnostics, status

Yes
Number of LEDs

3
Number of semi-conductor outputs with signaling function

1
Number of fail-safe digital outputs

2
Number of series-wiring of sensors

31

Safety classification

Standards

EN IEC 60947-5-3

EN IEC 61508
Performance Level, up to

e
Category

4
PFH value

3.60 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in

3
Mission time

20 Year(s)

Mechanical data

Actuating panels

lateral
Active area

lateral

Mechanical data - Switching distances according EN IEC 60947-5-3

Switch distance, typical

11 mm
Assured switching distance "ON" Sao

8 mm
Assured switching distance "OFF" Sar

15 mm
Hysteresis (Switching distance), maximum

1.5 mm
Repeat accuracy R

0.5 mm
Note (Repeat accuracy R)

Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 30 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 8 mm.

Mechanical data - Connection technique

Note (length of the sensor chain)

Cable length and cross-section change the voltage drop dependiing on the output current
Termination

Connector plug M12, 8-pole

Mechanical data - Dimensions

Length of sensor

27 mm
Width of sensor

35 mm
Height of sensor

108.2 mm

Ambient conditions

Degree of protection

IP65

IP67
Ambient temperature

-25 ... +70 °C
Storage and transport temperature

-25 ... +85 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms
Protection class

II

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VAC/DC
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

III
Degree of pollution

3

Electrical data

Operating voltage

24 VDC -15 % / +10 %
No-load supply current I0, typical

100 mA
Rated operating voltage

24 VDC
Operating current

600 mA
Required rated short-circuit current

100 A
Utilisation category DC-12

24 VDC
Utilisation category DC-12

0.05 A
Utilisation category DC-13

24 VDC
Utilisation category DC-13

0.05 A
Note (Electrical data, Fuse rating)

(Circuit breaker)
Switching frequency, approx.

3 Hz
Utilisation category DC-12

24 VDC / 0.05 A
Electrical fuse rating, maximum

2 A

Electrical data - Safety digital outputs

Rated operating current (safety outputs)

250 mA
Output current, (fail-safe output), maximum

0.25 A
Design of control elements

p-type
Voltage drop Ud, maximum

0.5 V
Leakage current Ir, maximum

0.5 mA
Voltage, Utilisation category DC-12

24 VDC
Current, Utilisation category DC-12

0.25 A
Voltage, Utilisation category DC-13

24 VDC
Current, Utilisation category DC-13

0.25 A

Electrical data - Digital Output

Design of control elements

p-type

Electrical data - Diagnostic outputs

Operating current

50 mA
Voltage drop Ud, maximum

5 V
Voltage, Utilisation category DC-12

24 VDC
Current, Utilisation category DC-12

0.05 A

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation

IEC 61000-6-4
EMC rating

IEC 61000-6-2

Pin assignment

PIN 1

1A1 Ue: (1)

PIN 2

X1 Safety input 1
PIN 3

A2 GND
PIN 4

Y1 Safety output 1
PIN 5

OUT Diagnostic output OUT
PIN 6

X2 Safety input 2
PIN 7

Y2 Safety output 2
PIN 8

IN without function

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

CSP 34-S-1
Recommended safety switchgear

PROTECT PSC1

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Coding of safety sensor and actuator: To activate the safety function (coding) of the CSP 34 for the first time, the associated actuator must be brought into the detection area of the switched on safety sensor. The automatic learn process of the actuator code is signalled on the safety sensor by the lighting up of the red LED and flashing of the yellow LED at the same time. After 10 seconds the cycling flashes indicate that the supply voltage of the safety sensor should be switched off for a few seconds so the code can be saved.
After the operating voltage is switched back on, the actuator must be detected once more in order to activate the taught actuator code. The assignment of safety sensor and actuator is permanently stored. The safety sensor can therefore not be activated by any other coding.
In order to protect the coding, the ordering details of the actuator are hidden by the mounting bracket.

Language filter

If a document is not available in the chosen language, the English version will be used by default.

Datasheet

Chinese (27/11/2024)
Danish (27/11/2024)
Dutch (27/11/2024)
English (27/11/2024)
Finnish (27/11/2024)
French (27/11/2024)
German (27/11/2024)
Italian (27/11/2024)
Japanese (27/11/2024)
Norwegian (27/11/2024)
Polish (27/11/2024)
Portugese (27/11/2024)
Portugese (27/11/2024)
Spanish (27/11/2024)
Swedish (27/11/2024)
Turkish (27/11/2024)

Operating instructions and Declaration of conformity

CSP 34 (344.5 kB, 10/05/2019, Revision B)
CSP 34 (344.5 kB, 10/05/2019, Revision B)
CSP 34 (344.5 kB, 10/05/2019, Revision C)
CSP 34 (339.6 kB, 10/05/2019, Revision C)
CSP 34 (338.2 kB, 10/05/2019, Revision C)
CSP 34 (343.1 kB, 10/05/2019, Revision C)
CSP 34 (337.2 kB, 10/05/2019, Revision C)
CSP 34 (630.2 kB, 10/05/2019, Revision B)
CSP 34 (373.5 kB, 10/05/2019, Revision C)
CSP 34 (362.8 kB, 10/05/2019, Revision C)
CSP 34 (342.2 kB, 10/05/2019, Revision C)
CSP 34 (343.8 kB, 10/05/2019, Revision B)

UL Certificate

CSS / CSP (384.9 kB, 01/08/2019)

Wiring example (electr. wiring)

CSP 34 (79.6 kB, 10/05/2019)

Brochure

sensores de seguridad electrónicos y enclavamientos por solenoide (2.0 MB, 10/05/2019, Revision 04)
Electronic Safety Sensors and Solenoid Interlocks (8.8 MB, 10/05/2019, Revision 07)
Capteurs et interverrouillages de sécurité électroniques (1.6 MB, 10/05/2019, Revision 01)
Sensori e ritenute di sicurezza elettronici (2.7 MB, 10/05/2019, Revision 05)

SISTEMA-VDMA library

(662.3 kB, 04/08/2023)
(659.3 kB, 04/08/2023)

Download the latest version of Adobe Reader

Adobe Reader
101218843 RSS 36-I1-D
  • Individual coding with RFID technology
  • Coding level "High" according to ISO 14119
  • 1 x Pre-wired cable 8-pole
  • Actuation from side
  • Thermoplastic enclosure
  • RFID-technology for needs-based protection against tampering
  • Misaligned actuation possible
  • 27 mm x 108.2 mm x 35 mm
  • High repeat accuracy of the switching points
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
101216958 RSS 36-I1-D-ST
  • Individual coding with RFID technology
  • Coding level "High" according to ISO 14119
  • 1 x connector socket M12, 8-pole
  • Actuation from side
  • Thermoplastic enclosure
  • RFID-technology for needs-based protection against tampering
  • Misaligned actuation possible
  • 27 mm x 108.2 mm x 35 mm
  • High repeat accuracy of the switching points
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 27/11/2024, 8:41 am