.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
SHGV/ESS21S2/xxx/103
SHGV/ESS21S2/xxx/103
Descargas
| Descripción del tipo de producto: SHGV(1)(2)/ESS21S2/(3)(4)/(5) |
| (1) | |
| sin | Sistema de cierre estándar |
| Z | Sistema de cierre para instalaciones con sistema de cierre maestro |
| (2) | |
| sin | Estándar plata |
| /SR | cabezas de llaves en diferentes colores |
| (3) | |
| xxx | Número(s) de llave(s) 100 … 999 |
| (4) | |
| oo/oo | Color grifo de la llave>#Picture#Bilddata/Interface/Tools/k__bry01.eps#/Picture# (BR)>#Picture#Bilddata/Interface/Tools/k__gey01.eps#/Picture# (amarillo (GB))>#Picture#Bilddata/Interface/Tools/k__roy01.eps#/Picture# (rojo (RT))>#Picture#Bilddata/Interface/Tools/k__bly01.eps#/Picture# (azul (BL))>#Picture#Bilddata/Interface/Tools/k__wey02.eps#/Picture# (blanco (WS))>#Picture#Bilddata/Interface/Tools/k__guy01.eps#/Picture# (gris (GR))>#Picture#Bilddata/Interface/Tools/k__gry01.eps#/Picture# (verde (GN))>#Picture#Bilddata/Interface/Tools/k__swy01.eps#/Picture# (negro (SW))>Se pueden realizar todas las combinaciones de colores. |
| (5) | |
| 103 | 1 contacto normalmente cerrado (NC) / 1 contacto normalmente abierto (NA) |
- Use in applications without dangerous run-on movements resp. run-on movements less than the key transfer time
- HS locking system-compatible versions possible
- Key switch including mounting flange and contact element
Ordering data
| Product type description |
SHGV/ESS21S2/xxx/103 |
| eCl@ss number, version 12.0 |
27-37-12-43 |
| eCl@ss number, version 11.0 |
27-37-12-43 |
| eCl@ss number, version 9.0 |
27-37-12-43 |
| ETIM number, version 7.0 |
EC001029 |
| ETIM number, version 6.0 |
EC001029 |
| Note (Ordering data) |
Nota: ¡En el pedido/solicitud se debe indicar el nº de cierre "xxx" requerido (p.ej. SHGV/ESS21S2/125/103)! En caso que no se indica un nº de cierre en el pedido/solicitud será entregado un nº de cierre según disponibilidad. ¡El usuario debe asegurar que no se utilizan llaves con numeración idéntico en una planta (empresa)! |
Approvals - Standards
| Certificates |
cULus CCC |
General data
| Standards |
EN IEC 62061 EN ISO 14119 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 60204-1 EN IEC 60947-1 |
| Versions |
Interruptor selector con acción por llave - Montaje en placa frontal |
| Installation conditions (mechanical) |
arbitrariamente |
| Sealing type |
Membrada Juntas labiales |
| Housing material |
Plástico, termoplástico reforzado con fibra de vidrio, auto-extinguible |
| Material of the cylinder lock |
Acero |
| Material of the front ring |
Aluminio |
| Colour of the cylinder lock |
Plata |
| Colour of the Contact element |
Negro |
| Colour of the front ring |
Plata |
| Colour of key head |
Plata |
General data - Features
| Latching |
Sí |
| Fully insulated |
Sí |
| Number of auxiliary contacts |
1 |
| Number of plunger |
1 |
| Number of switch positions |
2 |
Mechanical data
| Unlocking |
Desenclavamiento por iro |
| Key withdrawal position |
Posición I 90° |
| Latching position |
derecho |
| Mechanical life, minimum |
100.000 Operations |
| Mounting |
brida de montaje |
| Tightening torque of the screw |
0,6 Nm |
| Key number |
xxx |
Mechanical data - Connection technique
| Termination |
Terminales con tornillo M20 x 1.5 |
| Cable section, minimum |
0,5 mm², rígido 0,5 mm², flexible |
| Cable section, maximum |
2,5 mm², rígido 2,5 mm², flexible |
| Note |
Todas las especificaciones con terminales grimpados incluidos. |
| Tightening torque of Clips |
1 Nm |
Mechanical data - Dimensions
| Length x Width x Height |
Altura con llave (y elemento de contacto): 60 mm (119 mm) |
| Diameter of the front ring |
29,5 mm |
| diameters for the cylinder lock |
22 mm |
| Mounting diameter |
22,3 mm |
| Thickness, of the front panel, minimum |
1 mm |
| Thickness of the front panel, maximum |
6 mm |
| Spacing |
40 x 50 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Degree of protection of the switch rooms |
IP40 |
| Degree of protection of clips or terminals |
IP20 |
| Ambient temperature |
-25 ... +75 °C |
| Restistance to shock |
110 g / 4 ms |
| Resistant to vibration |
Resistencia a las sacudidas: 20 g / 10…200 Hz |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
400 V |
Electrical data
| Thermal test current |
10 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
8 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
5 A |
| Suitable for low-voltages |
≥ 5 V / ≥ 3,2 mA |
| Switching element |
Contacto normalmente cerrado (NC), contacto normalmente abierto (NA) |
| Switching principle |
Acción lenta |
| Bounce duration, maximum |
5 ms |
| Maximale Schalthäufigkeit |
5 /h |
| Material of the contacts, electrical |
Plata |
Filtro de idiomas
Ficha técnica
Manual de instrucciones y declaración de conformidad
Certificado UL
Descargar la versión actual de Adobe Reader
Foto de producto (foto individual de catálogo)
Dibujo dimensional Componente básico
Monitorización del bloqueo según ISO 14119
Contacto NC de apertura forzada
accionado
no accionado
Contacto NA
Contacto NC
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | SHGV, SHGV/ESS, SVE, SVM |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | IEC 60947-5-1:2016 + Cor1:2016 ISO 14119:2014 ISO 13849-1:2015 ISO 13849-2:2012 |
| Approved body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| Type examination certificate: | 01/205/5754.00/20 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, March 7, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Los datos e información anteriores se han verificado cuidadosamente. Las imágenes pueden diferir del original. Se pueden encontrar más datos técnicos en los manuales de instrucciones. Sujeto a cambios técnicos y errores.
Generado a 6/4/2025 15:16
Historial
