.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
PS226-Z11-R200
项目编号:
103015051
| 产品描述: PS(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12) |
| (2) | |
| 5 | 金属外壳 |
| 216 | 塑料外壳 |
| 226 | 塑料外壳，带 2 接线端口 |
| (3) | |
| 无 | L型孔（标准） |
| L | 延伸孔 |
| (4) | |
| Z11 | 速动 1 常开触点 / 1 常闭触点 |
| Z02 | 速动 2 常闭触点 |
| Z12 | 速动 1 常开触点 / 2 常闭触点 |
| Z11R | 速动 1 常开触点 / 1 常闭触点 带锁 |
| Z01R | 速动型 1 常闭触点 带锁 |
| Z02R | 缓动 2 常闭触点带锁 |
| T11 | 缓动 1 常开触点 / 1 常闭触点 |
| T02 | 缓动 2 常闭触点 |
| T20 | 缓动 2 常闭触点 |
| T12 | 缓动 1 常开触点 / 2 常闭触点 |
| T21 | 缓动 2 常开触点 / 1 常闭触点 |
| T03 | 缓动 3 常闭触点 |
| T11UE | 缓动 1 常开触点 / 1 常闭触点 带交错触点 |
| T02H | 缓动 2 常闭触点 非同步触点 |
| T11K | 缓动型 1 常开触点 + 1 常闭触点 - 短行程 |
| T10 | 缓动 1 常闭触点 |
| T02K | Slow action 2 NC contacts short-stroke |
| T20H | 缓动型 2 常开触点 非同步触点 |
| (5) | |
| 无 | 触头镀银（标准） |
| A1 | 金触头 0.3 μm |
| A2 | 金触头 1.0 μm |
| A3 | 金触头 3.0 μm |
| (6) | |
| 无 | 无显示灯 |
| G | 集成状态显示 |
| (7) | |
| 无 | M20接线口 |
| M16 | 电缆入口M16 |
| ST | 连接器插头 M12 - 塑料 - 底部 |
| STR | 连接器插头 M12， 右边 |
| STL | 连接器 M 12，左侧 |
| STM | 连接器插头 M 12，金属 |
| (8) | |
| S200 | 直杆S200 Ø 6 mm |
| S210 | 直杆 Ø 8,6 mm |
| S211 | 直杆 Ø 10,3 mm |
| S221 | 直杆 Ø 9,8 mm |
| R200 | 滚轮直动头顶部 R200 |
| R201 | 滚轮直杆 - 不锈钢滚轮 Ø 9.5 mm |
| R210 | 滚轮直杆 - 塑料滚轮 Ø 12mm |
| K201 | 滚轮直杆 - 不锈钢滚轮 - 宽度5.3 mm - Ø 12 mm |
| K200 | 滚轮推杆 - 塑料滚轮 - 宽度 5.3 mm - Ø 12 mm |
| K201 | 滚轮直杆 - 不锈钢滚轮 - 宽度5.3 mm - Ø 12 mm |
| K210 | 滚轮推杆 - 塑料滚轮 - 宽度 5mm - Ø 14 mm |
| K211 | 滚轮推杆 - 不锈钢滚轮 - 宽度5 mm - Ø 14 mm |
| K220 | 滚轮推杆 - 塑料滚轮 - 宽度 7.6 mm - Ø 14 mm |
| K230 | 斜角推杆 - 塑料滚轮 Ø 14 mm |
| K231 | 滚轮直杆 - 不锈钢滚轮 Ø 14 mm（标准） |
| K240 | 斜角推杆，带塑料滚轮 Ø 22 mm - 向右弯曲 |
| K250 | 斜角推杆，带塑料滚轮 Ø 22 mm - 向左弯曲 |
| H200 | 滚轮摇杆 - 塑料滚轮 Ø 16 mm - 摇杆长度 24 mm |
| H202 | 滚轮摇杆 - 黄铜滚轮 Ø 16 mm - 摇杆长度 24 mm（标准） |
| H230 | 滚轮摇杆 - 塑料滚轮 Ø 16mm - 摇杆长度 28 mm |
| H232 | 滚轮摇杆 - 黄铜滚轮 Ø 16mm - 摇杆长度 28 mm |
| H236 | 滚轮摇杆 - 橡胶滚轮 Ø 16mm - 摇杆长度 28 mm |
| N200 | 滚轮摇杆 2 mm齿（24...26mm） - 塑料滚轮 Ø 20 mm - 宽度 9.8 mm |
| N201 | 滚轮摇杆 可调，以2mm为增量（24...66mm） - 不锈钢滚轮 Ø 20mm - 宽度 9.8 mm |
| N202 | 滚轮摇杆 - 可调，以2mm为增量（24...66mm）- 黄铜滚轮 Ø 20mm - 宽度 9.8 mm |
| N206 | 滚轮摇杆 - 可调，以2mm为增量（24...66mm）- 橡胶滚轮 Ø 50mm - 宽度 16 mm |
| N210 | 滚轮摇杆 - 可调，以2mm为增量 (26...66 mm) - 塑料滚轮 Ø 20 mm - 宽度 4 mm - 长型 - 弯角 - 锁紧垫圈 |
| N280 | 滚轮摇杆 - 可调，以2mm为增量（24...66mm）- 塑料滚轮 Ø 20 mm - 宽度 5 mm - 长型 - 弯角 - 锁紧垫圈 |
| J200 | 棒杆 - 塑料 - 200mm - Ø 6mm |
| J201 | 棒杆 - 不锈钢 - 200 mm - Ø 6 mm （标准） |
| J203 | 棒杆 - 铝 - 200 mm - Ø 6 mm |
| F230 | 弹簧杆 - 不锈钢 - 150.4 mm |
| F231 | 弹簧杆 - 不锈钢 - 70.2 mm |
| A200 | 特殊操动螺栓 - 塑料 - 阀门控制 |
| (9) | |
| 无 | 不旋转（标准） |
| U1 | 旋转45° |
| U2 | 旋转90° |
| U3 | 旋转135° |
| U4 | 旋转180° |
| U5 | 旋转225° |
| U6 | 旋转270° |
| U7 | 旋转315° |
| (10) | |
| 无 | 摇杆不旋转（标准） |
| X1 | 摇杆旋转15° |
| X2 | 摇杆旋转30° |
| X3 | 摇杆旋转45° |
| X4 | 摇杆旋转60° |
| X5 | 摇杆旋转75° |
| X6 | 摇杆旋转90° |
| X7 | 摇杆旋转105° |
| X8 | 摇杆旋转120° |
| X9 | 摇杆旋转135° |
| X10 | 摇杆旋转150° |
| X11 | 摇杆旋转165° |
| X12 | 摇杆旋转180° |
| X13 | 摇杆旋转195° |
| X14 | 摇杆旋转210° |
| X15 | 摇杆旋转225° |
| X16 | 摇杆旋转240° |
| X17 | 摇杆旋转255° |
| X18 | 摇杆旋转270° |
| X19 | 摇杆旋转285° |
| X20 | 摇杆旋转300° |
| X21 | 摇杆旋转315° |
| X22 | 摇杆旋转330° |
| X23 | 摇杆旋转345° |
| (11) | |
| 无 | 外滚轮（标准） |
| I | 内滚轮 |
| (12) | |
| 无 | -30...+80°C (Standard) |
| T | -40...+80°C |
并非所有根据本订单代码可能的组件变体都可用和/或在技术上可行。
- thermoplastic enclosure with foldable latching cover
- Quick connection technology as connection terminals rotated by 45°
- cable entry 2 x M20 x 1,5
- Design to EN 50047
- Simple and quick to adjust the control elements by 45°.
- LED version available
Ordering data
| Product type description |
PS226-Z11-R200 |
| Article number (order number) |
103015051 |
| EAN (European Article Number) |
4030661501246 |
| eCl@ss number, version 12.0 |
27-27-26-01 |
| eCl@ss number, version 11.0 |
27-27-26-01 |
| eCl@ss number, version 9.0 |
27-27-26-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
| Certificates |
cULus CCC |
General data
| Standards |
EN IEC 60947-5-1 |
| Housing construction form |
标准结构设计 |
| Actuator type to EN 50047 |
c |
| Housing material |
塑料，玻璃纤维增强 |
| Gross weight |
85 g |
General data - Features
| Safety functions |
是 |
| Number of auxiliary contacts |
1 |
| Number of safety contacts |
1 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 |
| B10D Normally-closed contact (NC) |
20,000,000 Operations |
| Mission time |
20 Year(s) |
Mechanical data
| Actuating element |
滚轮直杆 R200 |
| Roller material |
塑料 |
| Mechanical life, minimum |
10,000,000 Operations |
| Positive break force, minimum |
40 N |
| Actuating speed, minimum |
10 mm/min |
| Actuating speed, maximum |
0.5 m/s |
| Tightening torque of the fixing screws |
1.2 Nm |
Mechanical data - Connection technique
| Termination |
螺丝端子 M20 x 1.5 |
| Cable section, minimum |
.34 mm² |
| Cable section, maximum |
1.5 mm² |
| Tightening torque of electrical connection, minimum |
0.6 Nm |
| Tightening torque of electrical connection, maximum |
0.8 Nm |
| Note (Cable entry) |
Absetzlänge des Leiters 5...6mm |
Mechanical data - Dimensions
| Length of sensor |
33 mm |
| Width of sensor |
59 mm |
| Height of sensor |
85.6 mm |
Ambient conditions
| Degree of protection |
IP66 IP67 |
| Ambient temperature |
-30 ... +80 °C |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
| Degree of pollution |
3 |
Electrical data
| Thermal test current |
10 A |
| Required rated short-circuit current |
400 A |
| Utilisation category AC-15 |
240 VAC |
| Utilisation category AC-15 |
3 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
3 A |
| Switching element |
1个NO 触点， 1个NC 触点 |
| Switching principle |
速动型 |
| Maximale Schalthäufigkeit |
5,000 /h |
| Material of the contacts, electrical |
银 |
语言条件
数据表
操作指南及符合性声明
手册
SISTEMA-VDMA 数据库
下载最新版本的Adobe Reader
产品图片（单独目录照片）
尺寸图 基本组件
尺寸图 操动件
开关行程图
触点关闭 
常开触点 
设置范围
锁定点
肯定断开路径/角度
电磁锁监控 依据EN ISO 14119
肯定断开常闭触点
操动 
未操动
常开触点
常闭触点
Video ID: Positionsschalter-PS
Position switches series PS (Vimeo)
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | PS116, PS215, PS216, PS226, PS315, PS316 |
| Type: | See ordering code |
| Description of the component: | Position switch |
| Relevant Directives: | Low Voltage Directive | 2014/35/EU |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, March 3, 2021 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | PS116, PS215, PS216, PS226, PS315, PS316 |
| Type: | See ordering code |
| Description of the component: | Position switches |
| Relevant legislation: | Electrical Equipment (Safety) Regulations | 2016 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, August 19, 2021 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/3/25 下午6:21
最近浏览
