CSS 7-180LC-2P-E-L

品番: 101187081

CSS 7-180LC-2P-E-L

品番: 101187081

Downloads

寸法 CADデータ

eプラン データ

CADENAS CADデータ

SISTEMA データ

Product type description:

CSS 8-180-(1)-(2)-(3)

(1)
2P	2 short-circuit proof PNP safety outputs
2P+D	2 short-circuit proof PNP safety outputs and diagnostic output

(2)
E	Individual sensor or end sensor in a series
Y	Series-wiring
M	Multifunction connection

(3)
L	Cable
LST	Cable with connector
ST	Connector plug

この型式記号に従って組み合わせられる全ての型式が、提供可能あるいは技術的に実現可能ということではありません。

Pre-wired cable 4-pole
Thermoplastic enclosure
Electronic contact-free, coded system
Misaligned actuation possible
High repeat accuracy of the switching points
Max. length of the sensor chain 200 m
Early warning when operating near the limit of the sensor's hysteris range
Self-monitoring series-wiring of 16 sensors
2 short-circuit proof PNP safety outputs

Ordering data

Product type description	CSS 7-180LC-2P-E-L
Article number (order number)	101187081
EAN (European Article Number)	4030661334905
eCl@ss number, version 12.0	27-27-46-01
eCl@ss number, version 11.0	27-27-24-03
eCl@ss number, version 9.0	27-27-24-03
ETIM number, version 7.0	EC001829
ETIM number, version 6.0	EC001829

Approvals - Standards

Certificates	TÜV cULus UKCA

General data

Standards	EN IEC 60947-5-3 EN IEC 61508
Working principle	誘導型
Housing construction form	シリンダー型、ネジ式
Installation conditions (mechanical)	不適切な
Sensor topology	個别センサーまたはシリーズの末端センサー
Housing material	グラスファイバー強化熱可塑性樹脂
Active area	グラスファイバー強化熱可塑性樹脂
Material of the nuts	グラスファイバー強化熱可塑性樹脂
Reaction time, maximum	30 ms
Duration of risk, maximum	30 ms
Gross weight	153 g

General data - Features

Short circuit detection	Yes
Cross-circuit detection	Yes
Safety functions	Yes
Integral system diagnostics, status	Yes
Number of fail-safe digital outputs	2
Number of series-wiring of sensors	16

Safety classification

Vorschriften	EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508
Performance Level, up to	e
Category	3
PFH value	1.00 x 10⁻⁸ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Tightening torque of nuts, maximum	3 Nm

Mechanical data - Switching distances

Switch distance, typical	7 mm
Assured switching distance "ON" S_ao	6 mm
Assured switching distance "OFF" S_ar	9 mm
Note (switching distance)	All switching distances in accordance EN IEC 60947-5-3
Hysteresis (Switching distance), maximum	0.7 mm
Repeat accuracy R	0.5 mm

Mechanical data - Connection technique

Length of cable	1 m
Termination	ケーブル
Terminal connector, Output	4芯
Wire cross-section	0.5 mm²
Wire cross-section	20 AWG

Mechanical data - Dimensions

ISO thread of the sensor	M18
width across flats	24 BK
Length of sensor	92 mm

Ambient conditions

Degree of protection	IP65 IP67
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-25 ... +85 °C
Resistance to vibrations	10 ~ 55 Hz, 振幅 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Operating voltage	24 VDC -15 % / +10 %
No-load supply current I₀, typical	50 mA
Rated operating voltage	24 VDC
Operating current	600 mA
Switching frequency, approx.	3 Hz

Electrical data - Safety digital outputs

Rated operating current (safety outputs)	500 mA
Output current, (fail-safe output), maximum	0.5 A
Design of control elements	PNP型
Voltage drop U_d, maximum	0.5 V
Leakage current I_r, maximum	0.5 mA
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.5 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.5 A

Status indication

Note (LED switching conditions display)	Multi-coloured LED: Green, Red, Yellow

Pin assignment

PIN 1	A1 Ue Brown
PIN 2	Y2 safety output 2: White
PIN 3	A2 GND Blue
PIN 4	Y1 Safety output 1 Black

Scope of delivery

Scope of delivery	Actuator must be ordered separately.
Scope of delivery of mounting material	ナット M18 x 1 2個

Accessory

Recommendation (actuator)	CST 180-1 CST 180-2
Recommended safety switchgear	PROTECT PSC1 SRB-E-301ST SRB-E-201LC

Note

Note (General)	Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.25 ms. Short-circuit recognition by the evaluation is not necessary.

Product picture (catalogue individual photo)

ID: kcs18f01

| 146,4 kB | .jpg | 352.778 x 164.747 mm - 1000 x 467 px - 72 dpi

| 21,5 kB | .png | 74.083 x 34.572 mm - 210 x 98 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact