SRB211AN (V.2)

品番: 101209242

注意

SRB211AN (V.2)

品番: 101209242

Downloads

寸法 CADデータ

eプラン データ

CADENAS CADデータ

SISTEMA データ

合計

STOP 0 / 1 Function
1 oder 2-channel control
Start button / Auto-start
Drop-out delay 0 … 30

Ordering data

Replacement article number	101211935
Product type description	SRB211AN (V.2)
Article number (order number)	101209242
EAN (European Article Number)	4030661446530
eCl@ss number, version 12.0	27-37-18-19
eCl@ss number, version 11.0	27-37-18-19
eCl@ss number, version 9.0	27-37-18-19
ETIM number, version 7.0	EC001449
ETIM number, version 6.0	EC001449
Notice	生産終了製品

Approvals - Standards

Certificates	IFA cULus

General data

Standards	EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1
Climatic stress	EN 60068-2-78
Housing material	グラスファイバー強化熱可塑性樹脂、換気口付き
Gross weight	250 g

General data - Features

Electronic Fuse	Yes
Wire breakage detection	Yes
Cross-circuit detection	Yes
Removable Terminals	Yes
Start input	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Reset edge detection	Yes
Earth connection detection	Yes
Integral system diagnostics, status	Yes
Number of LEDs	6
Number of normally closed (NC)	1
Number of normally open (NO)	1
Number of safety contacts	3
Number of Safety contacts, STOP 0	3
Number of Safety contacts, STOP 1	2
Number of signalling outputs	1

Safety classification

Vorschriften	EN IEC 60947-5-1 EN IEC 61508
Stop-Category	0 1

Safety classification - Relay outputs

Performance Level, stop 0, up to	e
Performance Level, stop 1, up to	d
Category, Stop 0	4
Category, Stop 1	3
Diagnostic Coverage (DC) Level, Stop 0	≥ 99 %
Diagnostic Coverage (DC) Level, Stop 1	> 60 %
PFH value, Stop 0	2.00 x 10⁻⁸ /h
PFH value, Stop 1	2.00 x 10⁻⁷ /h
Safety Integrity Level (SIL), Stop 0, suitable for applications in	3
Safety Integrity Level (SIL), Stop 1, suitable for applications in	2
Mission time	20 Year(s)
Common Cause Failure (CCF), minimum	65
PFD value	5.30 x 10⁻⁵
PFD value	5.30 x 10⁻⁵

Mechanical data

Mechanical lifetime, minimum	10,000,000 Operations
Mounting	EN 60715に基づくDINレールにワンタッチ取り付け

Mechanical data - Connection technique

Terminal designations	IEC/EN 60947-1
Cable section, minimum	0.25 mm²
Cable section, maximum	2.5 mm²
Tightening torque of Clips	0.6 Nm
Allowed type of cable	ソリッド単線柔軟な
Terminal (mechanical)	1000075113

Mechanical data - Dimensions

Width	22.5 mm
Height	100 mm
Depth	121 mm

Ambient conditions

Degree of protection of the enclosure	IP40
Degree of protection of the installation space	IP54
Degree of protection of clips or terminals	IP20
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-40 ... +85 °C
Resistance to vibrations	10 ~ 55 Hz、振幅 0.35 mm、± 15 %
Restistance to shock	30 g / 11 ms

Ambient conditions - Insulation values

Rated impulse withstand voltage U_imp	4 kV
Overvoltage category	III
Degree of pollution	2

Electrical data

Frequency range	50 Hz 60 Hz
Operating voltage	24 VAC -15 % / +10 % 24 VDC -15 % / +20 %
Ripple voltage	10 %
Rated operating voltage	24 VAC
Rated operating voltage	24 VDC
Rated AC voltage for controls, 50 Hz, minimum	20.4 VAC
Rated control voltage at AC 50 Hz, maximum	26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum	20.4 VAC
Rated control voltage at AC 60 Hz, maximum	26.4 VAC
Rated AC voltage for controls at DC minimum	20.4 VDC
Rated control voltage at DC, maximum	28.8 VDC
Electrical power consumption	2.4 W
Electrical power consumption	5.9 VA
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	新しい状態で
Drop-out delay in case of power failure, typically	80 ms
Drop-out delay in case of emergency, typically	30 ms
Pull-in delay at automatic start, maximum, typically	250 ms
Pull-in delay at RESET, typically	20 ms
Material of the contacts, electrical	AgSn0、Ag-Ni、セルフクリーニング, 強制ガイド式

Electrical data - Safe relay outputs

Voltage, Utilisation category AC-15	230 VAC
Current, Utilisation category AC-15	6 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	6 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	250 VAC
Switching capacity, maximum	8 A

Electrical data - Safe relay outputs

Voltage, Utilisation category AC-15	230 VAC
Current, Utilisation category AC-15	3 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	2 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	250 VAC
Switching capacity, maximum	6 A

Electrical data - Digital inputs

Conduction resistance, maximum	40 Ω

Electrical data - Digital Output

Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.1 A

Electrical data - Relay outputs (auxiliary contacts)

Switching capacity, maximum	24 VDC
Switching capacity, maximum	2 A

Electrical data - Electromagnetic compatibility (EMC)

EMC rating	EMC-Directive

Status indication

Indicated operating states	Position relay K2 Position relay K1 Internal operating voltage U_i Position relay K3/K4

Other data

Note (applications)	セーフティセンサーガードシステム非常停止ボタンワイヤーロープ式非常停止スイッチ

Note

Note (General)	Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Wiring example

Note (Wiring diagram)	The wiring diagram is shown with guard doors closed and in de-energised condition. Input level: The example shows a 2-channel control of a guard door monitoring with two position switches, whereof one with positive break, external reset button (R) and feedback circuit (H2). The control recognises cross-short, cable break and earth leakages in the monitoring circuit. The safety enabling circuit 37/38 conforms to EN 60204-1 for STOP Category 1. The safety enabling circuits 13/14 and 23/24 conform to EN 60204-1 for STOP Category 0.