.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
EX-BNS 120-11Z-3G/D 10,0M
项目编号:
101194300
| 产品描述: EX-BNS 120-(1)Z-3G/D |
| (1) | |
| 11 | 1 NO 触点/1 NC 触点 |
| 12 | 1 NO 触点/2 NC 触点 |
| 02 | 2 NC 触点 |
并非所有根据本订单代码可能的组件变体都可用和/或在技术上可行。
- Explosion protection for ATEX Zones 2 and 22
- Thermoplastic enclosure
- Ø M12
- Particularly large switching distance
- Insensitive to transverse misalignment
- Suitable for food processing industry only in combination with BP 15 SS
- no mechanical wear
Ordering data
| Product type description |
EX-BNS 120-11Z-3G/D 10,0M |
| Article number (order number) |
101194300 |
| EAN (European Article Number) |
4030661358567 |
| eCl@ss number, version 12.0 |
27-27-44-01 |
| eCl@ss number, version 11.0 |
27-27-24-02 |
| eCl@ss number, version 9.0 |
27-27-24-02 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
ATEX (Konformitätserklärung) |
Explosion protection
| Explosion protection: regulations |
EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
| Explosion protection zones |
2 22 |
| Explosion protection category |
3G 3D |
| Explosion protection designation |
D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
| Manufacturer declaration |
ATEX 2区和22区 |
General data
| Standards |
EN IEC 60947-5-3 |
| Housing construction form |
圆柱、螺纹 |
| Installation conditions (mechanical) |
准冲洗 |
| Housing material |
玻璃纤维，加强型热塑塑料 |
| Gross weight |
360 g |
General data - Features
| Coding |
是 |
| Short circuit detection |
是 |
| Cross-circuit detection |
是 |
| Number of normally closed (NC) |
1 |
| Number of normally open (NO) |
1 |
| Number of safety contacts |
2 |
| Safety classification |
| Vorschriften |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D- Value Normally-closed contact/Normally open contact (NC/NO) |
25,000,000 Operations |
Mechanical data
| Active area |
正面 |
| Actuating element |
磁铁 |
| Switching distance actuator |
操动磁铁 BP 6, Sao: 10 mm 操动磁铁 BP 8, Sao: 10 mm 操动磁铁 BP 8, Sar: 22 mm 操动磁铁 BP 10, Sao: 20 mm 操动磁铁 BP 10, Sar: 32 mm 操动磁铁 BP 15 SS, Sao: 20 mm 操动磁铁BP 15 SS, Sar: 32 mm |
| Impact energy, maximum |
2 J |
| Direction of motion |
正对着活动表面 |
Mechanical data - Switching distances
| Assured switching distance "ON" Sao |
10 mm 20 mm |
| Assured switching distance "OFF" Sar |
22 mm 32 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-3 |
Mechanical data - Connection technique
| Length of cable |
10 m |
| Termination |
电缆 |
| Wire cross-section |
0.25 mm2 |
| Wire cross-section |
23 AWG |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| ISO thread of the sensor |
M12 |
| Length of sensor |
38.5 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 ... 55 Hz，振幅 1 mm |
| Restistance to shock |
30 g / 11 ms |
Electrical data
| Switching voltage, maximum |
100 VAC |
| Switching voltage, maximum |
100 VDC |
| Switching current, maximum |
0.25 A |
| Switching capacity, maximum |
5 W |
| Switching element |
1个NO 触点， 1个NC 触点 |
| Switching frequency, maximum |
5 Hz |
Scope of delivery
| Scope of delivery |
操动件#必须单独订购. |
Accessory
| Recommendation (actuator) |
BP 10 BP 8 BP 6 BP 15 SS |
| Recommended safety switchgear |
SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
防护装置关闭状态的触点信号。 安全传感器的安装方式必须确保不能用另一个磁铁驱动（根据 EN ISO 14119 隐藏安装) |
产品图片（单独目录照片）
尺寸图 基本组件
图表
电磁锁监控 依据EN ISO 14119
肯定断开常闭触点
操动 
未操动
常开触点
常闭触点
操动件
101091837 BP 6
- Unenclosed
- S-pole marked red
101054816 BP 8
- Unenclosed
- S-pole marked red
101057531 BP 10
- Unenclosed
- Colour coding of poles by lables
101139818 BP 15 SS
- Suitable for food processing industry
- Stainless steel
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | EX-BNS 120 |
| Type: | See ordering code |
| Marking: | D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
| Description of the component: | Safety sensor with magnetic operating principle in combination with the AES and SRB safety-monitoring modules from Schmersal |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-3:2013 EN ISO 14119:2013 EN IEC 60079-0:2018 EN IEC 60079-15:2019 EN 60079-31:2014 |
| Conformity with SI 2016/1107 (Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres Regulations) is declared by the manufacturer without involving a conformity assessment center. |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 10, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | EX-BNS 120 |
| Type: | See ordering code |
| Marking: | D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
| Description of the component: | Safety sensor with magnetic operating principle in combination with the AES and SRB safety-monitoring modules from Schmersal |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| Explosion Protection Directive (ATEX) | 2014/34/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 EN ISO 14119:2013 EN IEC 60079-0:2018 EN IEC 60079-15:2019 EN 60079-31:2014 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, October 26, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
生成日期 2025/4/28 下午4:22
