Pull-wire emergency stop switches
ZQ 215
- Metallgehäuse
- Bauform nach EN 50047
- Schnellanschlusstechnik durch 45° gedrehte Anschlussklemmen
- Leitungseinführung 1 x M20 x 1,5
ZQ 315
- Metallgehäuse
- Schnellanschlusstechnik durch 45° gedrehte Anschlussklemmen
- Leitungseinführung 1 x M20 x 1,5
- Bauform nach EN 50041
ZQ 700
- Kunststoffgehäuse
- Einseitige Wirkweise / Seillänge bis 10 m
- Entriegelungstaster
- Stellungsanzeige
- großer Anschlussraum
- kein Verdrehen der Zugöse möglich
- Seilzug- und Seilrissfunktion
- eine Federkraft für eine Seillänge bis 10 m
ZQ 900
- Metallgehäuse
- Einseitige Wirkweise / Seillänge bis 75 m
- Entriegelungstaster
- Stellungsanzeige
- robuste Ausführung
- großer Anschlussraum
- kein Verdrehen der Zugöse möglich
- außenliegende Dichtmanschette
- Seilzug- und Seilrissfunktion
NEU
ZQ 901
- Edelstahlgehäuse
- Einseitige Wirkweise / Seillänge bis 75 m
- Entriegelungstaster
- Stellungsanzeige
- robuste Ausführung
- großer Anschlussraum
- kein Verdrehen der Zugöse möglich
- außenliegende Dichtmanschette
- Seilzug- und Seilrissfunktion
- 3 Leitungseinführungen M 20 x 1.5
RS655
- Metallgehäuse
- Seilzug- und Seilrissfunktion
- Schutzart IP66, IP67
- Zentrale Anschlussklemme
- Mechanische Schaltzustandsanzeige
- Zweiseitige Wirkweise / Seillänge bis 2 x 100 m
RS656
- Kunststoffgehäuse
- Seilzug- und Seilrissfunktion
- Schutzart IP66, IP67
- Zentrale Anschlussklemme
- Mechanische Schaltzustandsanzeige
- Zweiseitige Wirkweise / Seillänge bis 2 x 100 m
T3Z 068
- Metallgehäuse
- Zweiseitige Wirkweise / Seillänge bis 2 x 50 m
- robuste Ausführung
- geringe Betätigungskraft
Application:
Pull-wire Emergency Stop switches are mounted on machines and sections of plants which cannot be protected by guards. The advantage of pull-wire switches over mushroom head Emergency-Stop push buttons is that the Emergency-Stop command can be triggered anywhere along the wire.
In combination with one of the AES and AZR range safety monitoring modules pull-wire Emergency Stop switches can be used for Control Category 3 or 4 to ISO 13849-1.
Design and mode of operation:
All of the pull-wire emergency stop switches meet the European Standard EN ISO 13850. They have a positive linkage between the NC contacts and the wire rope. The pull-wire emergency stop switches are brought into the operational condition by pre-tensioning the wire, i.e. the NC contacts are then closed and the NO contacts open.
All of the pull-wire emergency stop switches have wire-breakage monitoring. On pulling or breakage of the wire, the NC contacts are positively opened and the NO contacts are closed. The pull-wire Emergency Stop switch can then only be returned to the operational condition by a resetting operation.
Pull-wire Emergency Stop switches are mounted on machines and sections of plants which cannot be protected by guards. The advantage of pull-wire switches over mushroom head Emergency-Stop push buttons is that the Emergency-Stop command can be triggered anywhere along the wire.
In combination with one of the AES and AZR range safety monitoring modules pull-wire Emergency Stop switches can be used for Control Category 3 or 4 to ISO 13849-1.
Design and mode of operation:
All of the pull-wire emergency stop switches meet the European Standard EN ISO 13850. They have a positive linkage between the NC contacts and the wire rope. The pull-wire emergency stop switches are brought into the operational condition by pre-tensioning the wire, i.e. the NC contacts are then closed and the NO contacts open.
All of the pull-wire emergency stop switches have wire-breakage monitoring. On pulling or breakage of the wire, the NC contacts are positively opened and the NO contacts are closed. The pull-wire Emergency Stop switch can then only be returned to the operational condition by a resetting operation.