IFL 10-30L-11TP-1766 10,0M
IFL 10-30L-11TP-1766 10,0M
Downloads
- Design M30
Ordering data
| Product type description |
IFL 10-30L-11TP-1766 10,0M |
| Article number (order number) |
101144418 |
| EAN (European Article Number) |
4030661133447 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
Approvals - Standards
| Certificates |
CCC |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
flush |
| Housing material |
Brass |
| Housing coating material |
nickel-plated |
| Active area |
Plastic |
| Material of the nuts |
Brass |
| Gross weight |
406 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Cable sleeve |
Yes |
Mechanical data
| Tightening torque of nuts, maximum |
30 Nm |
Mechanical data - Switching distances
| Nominal switching distance Sn |
10 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
10 m |
| Termination |
Cable |
| Number of cable wires |
4 |
| Wire cross-section |
0.25 mm2 |
| Material of the Cable mantle |
TPE-S |
Mechanical data - Dimensions
| ISO thread of the sensor |
M30 |
| width across flats |
36 BK |
| Length of sensor |
100 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
+0 ... +110 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
5.5 mA |
| Operating current |
200 mA |
| Switching element |
NO contact and NC contact (antivalent) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal |
| Switching frequency, approx. |
200 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1.2 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
p-type |
Note
| Note (General) |
Instead of nuts, a mounting clamp can be provided. |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 19/08/2025, 19:56