.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
IFL 15-30L-10/01P
Item number:
101127034
IFL 15-30L-10/01P
Item number:
101127034
Downloads
TraceParts
CAD Data
ePLAN
Data
CADENAS
CAD Data
SISTEMA
Data
| Product type description: IFL (1)-(2)(3)-(4)(5)(6)(7)-(8) |
| (1) | |
| 10 | Switching distance 10 mm |
| 15 | Switching distance 15 mm |
| (2) | |
| 30 | Cylinder, thread M30, metal |
| 300 | Cylinder, thread M30, plastic |
| (3) | |
| without | Standard body |
| M | Miniature body |
| L | Long design |
| (4) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (5) | |
| without | Cable |
| ST | Male connector |
| T | Conductor with strain relief |
| D | DC 2-wire |
| (6) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (7) | |
| N | n-type |
| P | p-type |
| (8) | |
| 1310 | Can be used up to +110 C (for alternating current (AC) only) |
| 2130 | Can be used up to +130 C, without LED switching conditions display |
| 1766 | Can be used up to +110 C (for p-type or n-type only) |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- 1 Cable entry PG9 x 1.5
- Metal enclosure
- DC 3-wire
- Wiring compartment
- Long design
- Design M30
Ordering data
| Product type description |
IFL 15-30L-10/01P |
| Article number (order number) |
101127034 |
| EAN (European Article Number) |
4030661278346 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
Approvals - Standards
|
CCC |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Brass |
| Housing coating material |
nickel-plated |
| Active area |
Plastic |
| Material of the nuts |
Brass |
| Gross weight |
140 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
3 |
Mechanical data
| Tightening torque of nuts, maximum |
30 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
15 mm |
Mechanical data - Connection technique
| Termination |
Screw connection |
| Cable section, maximum |
1 x 1.5 mm² |
Mechanical data - Dimensions
| ISO thread of the sensor |
M30 |
| width across flats |
36 BK |
| Length of sensor |
118 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
0 |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
5.5 mA |
| Rated operating voltage |
10 ... 60 VDC |
| Operating current |
400 mA |
| Switching element |
NO contact or NC contact |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal |
| Switching frequency, approx. |
100 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1.5 V |
| Current at Voltage drop Ud |
0.4 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Instead of nuts, a mounting clamp can be provided. Programmable by repositioning the plug-in jumper at the terminal screws |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Mouting accessories
101068520 ACC-IFL-MOCL-H30-M5X55
- For a smooth fitting of the proximity switches with cylindric shape Ø 30 mm or thread M30
UK Conformity Declaration
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | IFL Design: Ø 4, Ø 6,5, Ø 20, Ø 40, M8, M12, M18, M30, 2.., 3.., 6.., R.. |
| Type: | See ordering code |
| Description of the component: | Inductive proximity switch |
| Relevant legislation: | Electrical Equipment (Safety) Regulations | 2016 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN IEC 60947-5-2:2020 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, January 16, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 21/12/2024, 05:19