.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
MK 461-22Y
MK 461-22Y
Downloads
- 2 cable entries M 20 x 1.5
- Metal enclosure
- 118 mm x 155 mm x 64 mm ( basic component)
- Actuator heads can be repositioned by 4 x 90°
Ordering data
| Product type description |
MK 461-22Y |
| Article number (order number) |
101059049 |
| EAN (European Article Number) |
4030661034591 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
|
INMETRO |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mechanical |
| Slide form |
Castor |
| Housing material |
Grey cast iron, galvanised |
| Housing coating material |
painted |
| Gross weight |
2,025 g |
General data - Features
| Number of normally closed (NC) |
2 |
| Number of normally open (NO) |
2 |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Actuating element |
Offset roller lever |
| Roller material |
Plastic |
| Mechanical life, minimum |
5,000,000 Operations |
| Actuating angle, from left of switch axis |
45 ° |
| Actuating angle, from right of switch axis |
30 ° |
| Contact opening |
max. 2 x 2.5 mm |
| Actuating speed, minimum |
1 mm/min |
| Actuating speed, maximum |
0.5 m/s |
| Note (Actuating speed) |
Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
1.5 mm² |
| Cable section, maximum |
2.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Wire cross-section |
13 AWG |
Mechanical data - Dimensions
| Length of sensor |
64 mm |
| Width of sensor |
118 mm |
| Height of sensor |
229 mm |
| Width of Castor |
6.5 mm |
| Diameter of Castor |
25 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +90 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
16 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Switching element |
NO contact / NC contact |
| Switching principle |
Snap action |
| Bounce duration, maximum |
5 ms |
| Switchover time, maximum |
35 ms |
| Material of the contacts, electrical |
Silver |
Note
| Note (General) |
Actuation from the right should be avoided, since this reduces the mechanical life of the position switch. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
DNV-GL Certificate
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing actuator
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angle
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 19/11/2024, 07:33