.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
TV10S 355-12Z
TV10S 355-12Z
| Product type description: TV(1)S 355-(2)Z-(3) |
| (1) | |
| 8 | Shaft bore Ø 8 mm |
| 10 | Shaft bore Ø 10 mm |
| (2) | |
| 02 | 2 NC contact |
| 03 | 3 NC contact |
| 11 | 1 NO contact/1 NC contact |
| 12 | 1 NO contact/2 NC contacts |
| (3) | |
| without | Cable entry M20 |
| NPT | Cable entry NPT 1/2" |
| ST | M12 connector with A-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| ST-2310 | M12 connector with B-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| G24 | with LED (only available for version with one NO and one NC contact) |
- Metal enclosure
- Good resistance to oil and petroleum spirit
- Actuator heads can be repositioned by 4 x 90°
- 66,7 mm x 107 mm x 65,3 mm
- Actuator shaft can be turned 360°
Ordering data
| Product type description |
TV10S 355-12Z |
| Article number (order number) |
151179256 |
| EAN (European Article Number) |
4030661311746 |
| eCl@ss number, version 12.0 |
27-27-06-09 |
| eCl@ss number, version 11.0 |
27-27-06-09 |
| eCl@ss number, version 9.0 |
27-27-06-09 |
| ETIM number, version 7.0 |
EC002591 |
| ETIM number, version 6.0 |
EC002591 |
Approvals - Standards
|
cULus |
General data
| Housing material |
Light alloy die-casting |
| Housing coating material |
painted |
| Gross weight |
311 g |
| Safety classification |
| Standards |
BG-GS-ET-15 EN ISO 13849-1 EN IEC 60947-5-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
20,000,000 Operations |
Mechanical data
| Actuating element |
Other |
| Mechanical life, minimum |
1,000,000 Operations |
| Positive break angle |
7 ° |
| Mounting hole for the Shaft |
8 mm |
| Positive break torque |
0.6 Nm |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
Mechanical data - connector side B
| Connector typ |
Female connector |
Mechanical data - Dimensions
| Length of sensor |
65.3 mm |
| Width of sensor |
66.7 mm |
| Height of sensor |
107 mm |
Ambient conditions
| Degree of protection |
IP67 |
Electrical data
| Thermal test current |
10 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
4 A |
| Switching principle |
Slow action |
| Maximum switching frequency |
1,000 /h |
| Material of the contacts, electrical |
Silver |
Note
| Note (General) |
By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm) |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
Sample application illustration product
101147448 UNIVERSAL JOINT K2 CPL. UNIV.JOINT TV10S 335
- Factory-mounted pins
- Universal joint to compensate axial displacement
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 26/11/2024, 20:10