EX-CSS 8-180-2P+D-M-L-3G/D
EX-CSS 8-180-2P+D-M-L-3G/D
- Pre-wired cable 7-pole
- Comfortable diagnostics through sensor LED and electronic signalling output
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Ø M18
- Misaligned actuation possible
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- Early warning when operating near the limit of the sensor's hysteris range
- Self-monitoring series-wiring of 16 sensors
- 2 short-circuit proof PNP safety outputs
- Explosion protection for ATEX Zones 2 and 22
Ordering data
Product type description |
EX-CSS 8-180-2P+D-M-L-3G/D |
Article number (order number) |
101189302 |
EAN (European Article Number) |
4030661347158 |
eCl@ss number, version 12.0 |
27-27-46-01 |
eCl@ss number, version 11.0 |
27-27-24-03 |
eCl@ss number, version 9.0 |
27-27-24-03 |
ETIM number, version 7.0 |
EC001829 |
ETIM number, version 6.0 |
EC001829 |
Approvals - Standards
Certificates |
TÜV UKCA ATEX (Konformitätserklärung) |
Explosion protection
Explosion protection: regulations |
EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
Explosion protection zones |
2 22 |
Explosion protection category |
3G 3D |
Explosion protection designation |
D II 3G Ex nA IIB T6 Gc X D II 3G Ex nA IIC T6 Gc X D II 3D Ex tc IIIC T70°C Dc X |
Manufacturer declaration |
ATEX Zone 2 und 22 |
General data
Working principle |
induktiv |
Housing construction form |
Zylinder, Gewinde |
Installation conditions (mechanical) |
nicht bündig |
Sensor topology |
Reihenschaltungsgerät |
Housing material |
Kunststoff, glasfaserverstärkter Thermoplast |
Active area |
Kunststoff, glasfaserverstärkter Thermoplast |
Material of the nuts |
Kunststoff, glasfaserverstärkter Thermoplast |
Reaction time, maximum |
30 ms |
Duration of risk, maximum |
30 ms |
Gross weight |
135 g |
General data - Features
Short circuit detection |
Ja |
Cross-circuit detection |
Ja |
Safety functions |
Ja |
Integral system diagnostics, status |
Ja |
Number of semi-conductor outputs with signaling function |
1 |
Number of fail-safe digital outputs |
2 |
Number of series-wiring of sensors |
16 |
Safety classification |
Vorschriften |
EN ISO 13849-1 EN IEC 61508 |
Performance Level, up to |
e |
Category |
4 |
PFH value |
2,50 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Mechanical data
Impact energy, maximum |
2 J |
Tightening torque of nuts, maximum |
3 Nm |
Mechanical data - Switching distances
Switch distance, typical |
8 mm |
Assured switching distance "ON" Sao |
7 mm |
Assured switching distance "OFF" Sar |
10 mm |
Note (switching distance) |
Alle Angaben der Schaltabstände gemäß EN IEC 60947-5-3 |
Hysteresis (Switching distance), maximum |
0,7 mm |
Repeat accuracy R |
0,2 mm |
Mechanical data - Connection technique
Length of cable |
2 m |
Termination |
Leitung |
Terminal connector, Output |
7-polig |
Number of cable wires |
7 |
Wire cross-section |
0,25 mm2 |
Wire cross-section |
23 AWG |
Mechanical data - Dimensions
ISO thread of the sensor |
M18 |
width across flats |
24 BK |
Length of sensor |
92 mm |
Ambient conditions
Degree of protection |
IP65 IP67 |
Ambient temperature |
-25 ... +40 °C |
Storage and transport temperature |
-25 ... +85 °C |
Resistance to vibrations |
10 … 55 Hz, Amplitude 1 mm |
Restistance to shock |
30 g / 11 ms |
Protection class |
II |
Ambient conditions - Insulation values
Rated insulation voltage Ui |
32 VDC |
Rated impulse withstand voltage Uimp |
0,8 kV |
Overvoltage category |
III |
Degree of pollution |
3 |
Electrical data
Operating voltage |
24 VDC -15 % / +10 % |
No-load supply current I0, typical |
50 mA |
Rated operating voltage |
24 VDC |
Operating current |
1.000 mA |
Switching frequency, approx. |
3 Hz |
Utilisation category DC-12 |
24 VDC / 0,05 A |
Electrical data - Safety digital outputs
Design of control elements |
p-schaltend |
Voltage drop Ud, maximum |
0,5 V |
Leakage current Ir, maximum |
0,5 mA |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0,5 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0,5 A |
Electrical data - Digital Output
Design of control elements |
p-schaltend |
Electrical data - Diagnostic outputs
Voltage drop Ud, maximum |
4 V |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
0,05 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0,05 A |
Status indication
Note (LED switching conditions display) |
Mehrfarben-LED: Grün, Rot, Gelb |
Pin assignment
PIN 1 |
A1 Ue: braun |
PIN 2 |
Y2 Sicherheitsausgang 2: rot |
PIN 3 |
A2 GND: blau |
PIN 4 |
Y1 Sicherheitsausgang 1: schwarz |
PIN 5 |
X1 Sicherheitseingang 1: violett |
PIN 6 |
X2 Sicherheitseingang 2: weiß |
PIN 7 |
Meldeausgang: grau |
Scope of delivery
Scope of delivery |
Der Betätiger ist nicht im Lieferumfang enthalten. |
Scope of delivery of mounting material |
2x Muttern M18 x 1 |
Accessory
Recommendation (actuator) |
CST 180-1 CST 180-2 |
Note
Note (General) |
Reihenschaltung von Sensoren: 16 Sicherheits-Sensoren können sich selbst überwachend in Reihe geschaltet werden. Der zweikanalige Ausgang eines Sensor wird hierbei auf den Eingang des nachfolgenden Sensors geschaltet / gesteckt. Die Kategorie 4, gem. EN ISO 13849-1wird hierdurch nicht verändert. Der Spannungsabfall einer langen Sensorkette sollte bei der Planung beachtet werden. Betriebsspannung, Querschnitt und Längeder Leitung, Temperatur, Anzahl der beteiligten Sensoren, aber auch die Eingangslast der abschließenden Auswertung beeinflussen den Spannungsabfall der Sensorkette. |
Sprachfilter
Datenblatt
Betriebsanleitung und Konformitätserklärung
TÜV-Zertifikat
UKCA-Zertifikat
Schaltungsbeispiel (elektr. Verdrahtung)
Broschüre
SISTEMA-VDMA Bibliothek/Library
Download der aktuellen Version von Adobe Reader
Produktbild (Katalogeinzelphoto )
Maßzeichnung Grundgerät
Kontaktbild
Kennliniendiagramm
Familienbild (Gruppenfoto)
UK Declaration of Conformity | ![]() |
Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
Name of the component: | EX-CSS 8-180 |
Type: | See ordering code |
Marking: | D II 3G Ex nA IIC T6 Gc X D II 3D Ex tc IIIC T70°C Dc X |
Description of the component: | Non-contact safety sensor |
Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
Electromagnetic Compatibility Regulations | 2016 | |
Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres Regulations | 2016 | |
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
Designated standards: | EN 60947-5-3:2013, EN ISO 14119:2013, EN ISO 13849-1:2015, EN 61508 parts 1-7:2010, EN IEC 60079-0:2018, EN IEC 60079-15:2019, EN 60079-31:2014 |
Approved body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
Type examination certificate: | 01/205/5874.00/21 |
The conformity assessment procedure for explosion protection was carried out in accordance with Article 13 of Directive 2014/34/EU, under the responsibility of the manufacturer K.A. Schmersal GmbH & Co. KG. |
UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
Place and date of issue: | Wuppertal, August 12, 2022 |
![]() |
Authorised signature Philip Schmersal Managing Director |
EU-Konformitätserklärung | ![]() |
Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Erklärung: | Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen. |
Bezeichnung des Bauteils: | EX-CSS 180 |
Typ: | siehe Typenschlüssel |
Kennzeichnung: | D II 3G Ex nA IIC T6 Gc X |
D II 3D Ex tc IIIC T70°C Dc X |
Beschreibung des Bauteils: | Berührungslos wirkender Sicherheits-Sensor |
Einschlägige Richtlinien: | Maschinenrichtlinie | 2006/42/EG |
EMV-Richtlinie | 2014/30/EU | |
Explosionsschutzrichtlinie (ATEX) | 2014/34/EU | |
RoHS-Richtlinie | 2011/65/EU |
Angewandte Normen: | DIN EN 60947-5-3:2014 EN 60079-0:2012 + A11:2013 EN 60079-15:2010 EN 60079-31:2014 |
Benannte Stelle für die Zertifizierung des QS-Systems nach Anhang IV, 2014/34/EU: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln Kenn-Nr.: 0035 |
Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
Ort und Datum der Ausstellung: | Wuppertal, 2. Mai 2017 |
![]() |
Rechtsverbindliche Unterschrift Philip Schmersal Geschäftsführer |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
Die genannten Daten und Angaben wurden sorgfältig geprüft. Abbildungen können vom Original abweichen. Weitere technische Daten finden Sie in der Betriebsanleitung. Technische Änderungen und Irrtümer vorbehalten.
Generiert am: 26.07.2025, 09:08