.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
BNS-Y-02
BNS-Y-02
- enables the interconnection and the connection of BNS safety sensors to a common safety monitoring module
- for BNS 33, BNS 36, BNS 260 (with 2 NC)
Ordering data
| Product type description |
BNS-Y-02 |
| Article number (order number) |
101194060 |
| EAN (European Article Number) |
4030661358086 |
| eCl@ss number, version 12.0 |
27-44-01-06 |
| eCl@ss number, version 11.0 |
27-44-01-06 |
| eCl@ss number, version 9.0 |
27-44-01-06 |
| ETIM number, version 7.0 |
EC002925 |
| ETIM number, version 6.0 |
EC002925 |
General data
| Versions |
Y-adapter |
| Connector (electric) |
2 x Female connector, 4-pole 1 x Male connector, 4-pole |
| Gross weight |
23 g |
Mechanical data
| Mechanical life, minimum |
100 Cycles |
Mechanical data - Dimensions
| Length |
10 mm |
| Width |
23.5 mm |
| Height |
31 mm |
| Diameter of the ISO-thread |
M8 |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
Accessory
| Recommendation (product combination) |
BNS 33 BNS 36 BNS 260 |
Note
| Note (General) |
The adapter BNS-Y-02 is intended for safety sensors BNS with two normally closed contacts. With the BNS-Y-02, a series circuit is set up where the two normally closed contacts per sensor are connected in a two-channel series arrangement. Any conventional 4-pole cable with M8 connector can be used as connecting cable. The sensor chain is extended by connecting further Y-adapters in the direction of the arrow. The last safety sensor is connected to the female connector on the extension as the termination. Only safety sensors with the same contact configuration can be connected in series. The types BNS-Y-11 and BNS-Y-02 are not allowed to be connected together in a mixed configuration. The maximum length of the series wiring is 50 m. |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
Mounting and wiring instructions
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Wiring example
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 18/12/2024, 06:31