.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
M2C 441-11Y
M2C 441-11Y
Downloads
| Product type description: (1)(2) 441-11Y(3)-(4)-(5) |
| (1) | |
| T | Slow action (not for AF/S) |
| M | Snap action |
| (2) | |
| S | Plunger S |
| 2S | Telescopic plunger 2S |
| R | Roller plunger R |
| K | Offset roller lever K |
| J | Offset roller lever J |
| 2C | Fork lever 2C |
| L | Roller lever L |
| D | Roller lever D |
| MAF/S | Level switch AF/S |
| (3) | |
| UE | Slow action with overlapping contacts |
| (4) | |
| without | Cast iron enclosure |
| A | Aluminium enclosure |
| (5) | |
| T | temperature-resistant and tropical version with ceramic insulation for -40 °C … +200 °C |
| 1276-2 | Gold-plated contacts |
- 2 cable entries M 20 x 1.5
- Metal enclosure
- With latching end position
- Actuator heads can be repositioned by 4 x 90°
- Change in actuating direction by repositioning actuator head
- 2 Contacts
- 106 mm x 99 mm x 63 mm (basic component)
- Case-hardened lever
- Protection class IP65
Ordering data
| Product type description |
M2C 441-11Y |
| Article number (order number) |
101059676 |
| EAN (European Article Number) |
4030661037103 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
|
INMETRO CCC |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mechanical |
| Housing material |
Grey cast iron, galvanised |
| Housing coating material |
painted |
| Gross weight |
1,524 g |
General data - Features
| Number of normally closed (NC) |
1 |
| Number of normally open (NO) |
1 |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Actuating element |
Fork lever |
| Mechanical life, minimum |
5,000,000 Operations |
| Contact opening |
2 x 2.5 mm |
| Actuating speed, minimum |
1 mm/min |
| Actuating speed, maximum |
0.5 m/s |
| Note (Actuating speed) |
Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
1.5 mm² |
| Cable section, maximum |
2.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Wire cross-section |
13 AWG |
Mechanical data - Dimensions
| Length of sensor |
63 mm |
| Width of sensor |
106 mm |
| Height of sensor |
194 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +90 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
16 A |
| Utilisation category AC-15 |
250 VAC |
| Utilisation category AC-15 |
4 A |
| Switching element |
NO contact, NC contact |
| Note (Switching element) |
galvanically separated contact bridges |
| Switching principle |
Snap action |
| Bounce duration, maximum |
5 ms |
| Switchover time, maximum |
35 ms |
| Material of the contacts, electrical |
Silver |
Language filter
Datasheet
Operating instructions and Declaration of conformity
CCC certification
DNV-GL Certificate
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing actuator
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angle
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 26/11/2024, 14:53