.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
IFL 20-333-11P-M20
IFL 20-333-11P-M20
Downloads
| Product type description: IFL (1)-(2)-(3)(4)(5)(6) |
| (1) | |
| 15 | Switching distance 15 mm |
| 20 | Switching distance 20 mm |
| (2) | |
| 333 | Square design, 112 x 40 x 40 mm |
| (3) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (4) | |
| without | Cable |
| D | DC 2-wire |
| A | Alternating current/direct current AC/DC |
| (5) | |
| Y | Protection class IP65 |
| Z | Protection class IP67 |
| (6) | |
| N | n-type |
| P | p-type |
- 1 Cable entry M 20 x 1.5
- Thermoplastic enclosure
- DC 4-wire
- Double-insulated
- Wiring compartment
- Design 333
Ordering data
| Product type description |
IFL 20-333-11P-M20 |
| Article number (order number) |
101173918 |
| EAN (European Article Number) |
4030661303055 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
Approvals - Standards
| Certificates |
CCC |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Material of the housing cover |
Luran |
| Gross weight |
160 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
4 |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
20 mm |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, maximum |
2 x 1.5 mm² |
Mechanical data - Dimensions
| Length of sensor |
40 mm |
| Width of sensor |
40 mm |
| Height of sensor |
112 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-25 ... +70 °C |
| Protection class |
II |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
5.5 mA |
| Rated operating voltage |
10 ... 60 VDC |
| Operating current |
400 mA |
| Switching element |
NO contact and NC contact (antivalent) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal |
| Switching frequency, approx. |
100 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1.5 V |
| Current at Voltage drop Ud |
0.4 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
By repositioning the switch 5 different actuating directions can be selected. The selected actuating direction can be marked with a sticker. |
Language filter
Datasheet
Mounting and wiring instructions
EC Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 02/05/2024, 5:55 pm