schmersal_s_icon.png

TV10S 355-11Z

Item number: 151117211
TV10S 355-11Z

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

TV(1)S 355-(2)Z-(3)


(1)
8Shaft bore Ø 8 mm
10Shaft bore Ø 10 mm

(2)
022 NC contact
033 NC contact
111 NO contact/1 NC contact
121 NO contact/2 NC contacts

(3)
withoutCable entry M20
NPTCable entry NPT 1/2"
STM12 connector with A-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.)
ST-2310M12 connector with B-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.)
G24with LED (only available for version with one NO and one NC contact)
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Metal enclosure
  • Good resistance to oil and petroleum spirit
  • Actuator heads can be repositioned by 4 x 90°
  • 66,7 mm x 107 mm x 65,3 mm
  • Actuator shaft can be turned 360°

Ordering data

Product type description

TV10S 355-11Z
Article number (order number)

151117211
EAN (European Article Number)

4030661073446
eCl@ss number, version 12.0

27-27-06-09
eCl@ss number, version 11.0

27-27-06-09
eCl@ss number, version 9.0

27-27-06-09
ETIM number, version 7.0

EC002591
ETIM number, version 6.0

EC002591

Approvals - Standards

Certificates

cULus

General data

Housing material

Light alloy die-casting
Housing coating material

painted

Gross weight

310 g

Safety classification

Standards

BG-GS-ET-15

EN ISO 13849-1

EN IEC 60947-5-1
Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

20,000,000 Operations

Mechanical data

Actuating element

Other
Mechanical life, minimum

1,000,000 Operations
Positive break angle

7 °
Mounting hole for the Shaft

8 mm
Positive break torque

0.6 Nm

Mechanical data - Connection technique

Termination

Screw terminals M20 x 1.5

Mechanical data - connector side B

Connector typ

Female connector

Mechanical data - Dimensions

Length of sensor

65.3 mm
Width of sensor

66.7 mm
Height of sensor

107 mm

Ambient conditions

Degree of protection

IP67

Electrical data

Thermal test current

10 A
Utilisation category AC-15

230 VAC
Utilisation category AC-15

4 A
Utilisation category DC-13

24 VDC
Utilisation category DC-13

4 A
Switching principle

Slow action
Maximum switching frequency

1,000 /h
Material of the contacts, electrical

Silver

Note

Note (General)

By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered.

Adjustment tool: locking screw to fix, shaft pre-drilled to pin

Universal joint available to compensate for axial displacement (only for shaft bore 10 mm)

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 22/12/2024, 1:12 pm