BNS 40S-12ZG 3,0M

Item number: 103000646

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
Product type description:

BNS 40S-12Z(1)-(2)


(1)
withoutwithout LED switching conditions display
Gwith LED switching conditions display

(2)
withoutwith countersunk mounting holes Ø 4.2 mm
Cconcealed threaded holes on the back M4
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • LED version
  • Stainless steel enclosure
  • Cable connection suitable for the food industry
  • Concealed mounting possible
  • 88 mm x 27 mm x 14,5 mm
  • Long life
  • no mechanical wear
  • Insensitive to soiling
  • Insensitive to transverse misalignment
  • Suitable for food processing industry

Ordering data

Product type description

BNS 40S-12ZG 3,0M

Article number (order number)

103000646

EAN (European Article Number)

4030661420967

eCl@ss number, version 12.0

27-27-44-01

eCl@ss number, version 11.0

27-27-24-02

eCl@ss number, version 9.0

27-27-24-02

ETIM number, version 7.0

EC002544

ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

TÜV

BG

cULus

ECOLAB

General data

Standards

BG-GS-ET-14

EN IEC 60947-5-3

Coding level according to EN ISO 14119

Low

Working principle

Magnetic drive

Installation conditions (mechanical)

not flush

Housing material

Stainless steel (V4A)

Gross weight

320 g

General data - Features

Concealed, threaded holes on the back

No

Integral system diagnostics, general

Yes

Prerequisite evaluation unit

Yes

Number of normally closed (NC)

2

Number of normally open (NO)

1

Number of cable wires

6

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D- Value Normally-closed contact/Normally open contact (NC/NO)

25,000,000 Operations

Mechanical data

Actuating element

Magnet

Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" Sao

8 mm

Assured switching distance "OFF" Sar

18 mm

Mechanical data - Connection technique

Length of cable

3 m

Termination

Cable

Wire cross-section

0.25 mm2

Wire cross-section

23 AWG

Material of the Cable mantle

LiYY

Mechanical data - Dimensions

Length of sensor

14.5 mm

Width of sensor

88 mm

Height of sensor

27 mm

Ambient conditions

Degree of protection

IP69

Ambient temperature

-25 ... +80 °C

Storage and transport temperature

-25 ... +80 °C

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Electrical data

Switching current, maximum

0.01 A

Switching capacity, maximum

0.2 W

Switching frequency, maximum

5 Hz

Electrical data - Digital Output

Design of control elements

Miscellaneous, Reed contacts

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 40S-2

BPS 40S-1-C

BPS 40S-2-C

Recommended safety switchgear

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Contact symbols shown for the closed condition of the guard device.

The contact configuration for versions with or without LED is identical.

Wiring example

Note (Wiring diagram)

Contact S21-S22 must be integrated in the safety circuit.


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 19/03/2024, 11:37