.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
SEP 09.0
- Aluminium enlosure
- with removable aluminium cover at the bottom
- for separate mounting of the actuators for the two-hand control
| Product type description: SEPK02.0.(1).(2).(3)/(4).(5) SEPG05.3.(1).(2).(3)/(4).(5) SEP01.0.(1).(2).(3)/(4).(5) SEP01.4.(1).(2).(3)/(4).(5) SEPLC05.2.(1).(2).(3)/(4).(5) SEP07.0.(1).(2).(3)/(4).(5) SEP09.0.(1).(2).(3)/(4).(5) |
| Command devices make and head diameter (control parts / emergency stop) depending on ➁ (with SEP09.0... emergency stop not featured) | |
| (1) | |
| 1 | Schmersal 55 mm / Schmersal 49 mm |
| 2 | Schmersal 42 mm / Schmersal 49 mm or Siemens 40 mm / Schmersal 49 mm |
| 3 | Schmersal 42 mm / Schmersal 38,5 mm or Siemens 40 mm / Siemens 40 mm |
| 4 | Schmersal 55 mm / Schmersal 38,5 mm |
| L | Empty enclosure with 22.3 mm holes (no command devices installed) |
| S-XXXX | Special version with 4-digit serial number |
| (2) | |
| 0 | Command devices from Schmersal |
| 1 | Command devices from Schmersal or Schmersal / Siemens |
| (3) | |
| 0 | Installation diameter of command devices (22.3 mm) |
| 1 | Installation diameter of command devices (30.5 mm) |
| (4) | |
| 95 | NC contacts and NO contacts of control parts in separated form |
| (5) | |
| E1 | Mushroom button with actuating force 10.5 N |
| E2 | Mushroom button with actuating force 7.0 N |
| Z1 | Emergency stop with 2 NC contacts and 2 NO contacts (not with SEPK02.0....) |
| Z2 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent instead of emergency stop) |
| Z3 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent instead of emergency stop) |
| Z4 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent in addition to emergency stop) |
| Z5 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent in addition to emergency stop) |
| Z6 | Pre-punched Al panel with 11 x Ø 22.3 mm holes (only for SEPLC05.2...) |
| Z7 | As with Z6 though holes are sealed with dummy plugs (only for SEPLC05.2...) |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
